On the advice of sensors-detect I am using the following modules under
Fedora Core 4 on my 440BX-based system:
MODULE_0=i2c-piix4
MODULE_1=i2c-isa
MODULE_2=w83781d
MODULE_3=smbus-arp
When I run sensors, I get duplicated output (see below). I don't need both
of these sources to be queried and plan to stop using one of them.
Which of these 2 sources is preferred over the other?
Thanks.
------------------------------
w83782d-isa-0290
Adapter: ISA adapter
VCore 1: +1.68 V (min = +1.57 V, max = +1.73 V)
VCore 2: +1.68 V (min = +1.57 V, max = +1.73 V)
+3.3V: +3.47 V (min = +3.14 V, max = +3.46 V) ALARM
+5V: +4.95 V (min = +4.73 V, max = +5.24 V)
+12V: +12.10 V (min = +10.82 V, max = +13.19 V)
-12V: -12.11 V (min = -13.18 V, max = -10.88 V)
-5V: -5.05 V (min = -5.25 V, max = -4.75 V)
V5SB: +5.13 V (min = +4.73 V, max = +5.24 V) (beep)
VBat: +3.15 V (min = +2.40 V, max = +3.60 V) (beep)
fan1: 4720 RPM (min = 2657 RPM, div = 2)
fan2: 4687 RPM (min = 2657 RPM, div = 2)
fan3: 1506 RPM (min = 664 RPM, div = 8)
temp1: +38?C (high = +127?C, hyst = +0?C) sensor = thermistor
temp2: +50.5?C (high = +70?C, hyst = +69?C) sensor = thermistor
temp3: +47.5?C (high = +70?C, hyst = +69?C) sensor = thermistor
vid: +1.650 V (VRM Version 8.2)
alarms:
beep_enable:
Sound alarm disabled
w83782d-i2c-0-2d
Adapter: SMBus PIIX4 adapter at 5000
VCore 1: +1.68 V (min = +1.57 V, max = +1.73 V)
VCore 2: +1.68 V (min = +1.57 V, max = +1.73 V)
+3.3V: +3.46 V (min = +3.14 V, max = +3.46 V) ALARM
+5V: +4.97 V (min = +4.73 V, max = +5.24 V)
+12V: +12.10 V (min = +10.82 V, max = +13.19 V)
-12V: -12.11 V (min = -13.18 V, max = -10.88 V)
-5V: -5.05 V (min = -5.25 V, max = -4.75 V)
V5SB: +5.13 V (min = +4.73 V, max = +5.24 V) (beep)
VBat: +3.15 V (min = +2.40 V, max = +3.60 V) (beep)
fan1: 4720 RPM (min = 2657 RPM, div = 2)
fan2: 4787 RPM (min = 2657 RPM, div = 2)
fan3: 1506 RPM (min = 664 RPM, div = 8)
temp1: +37?C (high = +127?C, hyst = +0?C) sensor = thermistor
temp2: +50.5?C (high = +70?C, hyst = +69?C) sensor = thermistor
temp3: +47.0?C (high = +70?C, hyst = +69?C) sensor = thermistor
vid: +1.650 V (VRM Version 8.2)
alarms:
beep_enable:
Sound alarm disabled
