Hello, if I use the set sensor 2 - I get: Temp 3: +74??C (low = +35??C, high = +55??C) sensor = thermistor If I use type 3 - I get: Temp 3: -79??C (low = +35??C, high = +55??C) sensor = diode I have no compute temp 3 line, if I try the suggested (for some other board in the conf file) -15.096+1.4893*@), (@+15.096)/1.4893 It's going down to: -134??C (diode) If I try the following formula: compute temp3 (@+128)/3, (3*@-128) I get +16*C The CPU temp should be around 45-55*C.. please guys help me out here, what could be done? On 24/01/06, Rudolf Marek <r.marek at sh.cvut.cz> wrote: > > I switched from AMD XP TB to AMD Mobile Barton on a GB 7n400e-l (it8217) > > and now CPU temp reading has gone to -74*C from the previous +45*C > > readings. In bios temp readings are just it's fine.. right now it looks > > as a diode (meaning auto selected by sensors) but if I change it to > > thermistor (which I doubt is the type in this MB) it just changes to > > +74*C or something similar, please tell me how to reset all-together > > sensors data about the diode/thermistor settings or to pastebin my > > config? there is no offset for cputemp in bios. Many thanks in advance! > > Hmm thats really strange. Maybe the temp reading are inverted for some > reason? > > Please have a look to propper /etc/sensors.conf section > (look for: compute temp1 (-15.096+1.4893*@), (@+15.096)/1.4893 ) or > similar) > > Maybe other people round can have some idea? > > Regards, > Rudolf > -- Cheers, Filip -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20060124/708c0843/attachment.html
