Hmm it's basically working but the fan and temp values aren't read. Perhaps there was a sysfs name change in 2.6.13? Do you have sensors 2.9.2? (sensors -v) For the labels in 'sensors', copy the label statements that appear in dmesg after bmcsensors module load and copy it to the bmcsensors section of /etc/sensors.conf. Sch?fer Raumgestaltung wrote: > Hi, > > > > I had only partial success :-(( > > > > Board: INTEL SE7320SP2 with mBMC PC87431 , 6300ESB SMBus > > > > Suse Linux 10.0 Kernel 2.6.13-15-smp with the following patches > > > > linux-i2c-2.6.13-v36.1-i801.diff > linux-ipmi-2.6.13-v36.1-2.base.diff > linux-ipmi-2.6.13-v36.1-2.emu.diff > linux-ipmi-2.6.13-v36.1-2.smb.diff > bmcsensors-20050809 > > > > > > The output from sensor (package ipmiutil) seems to be OK > > but sensors (and therefore all aplications based on it) > > brings up a complete different assiociation of Labels and MIN/MAX Values > > and isn't able to read FAN and Temperature Values > > > > please see attached output......... > > > > btw > > > > after updating the Board's mBMC with FRUSDR to Ver. 1.50 (yes the Firmware > was already 2.40) > > ipmitool - I open fru list still 'hangs' ipmi_smb driver > > but I'm able to read FRU-Data with FRUCONFIG without problems > > > > Any hints ? > > > > Regards Uli > > > > > > > > > > linux-server:~ # sensor > > sensor: version 1.33 > > -- mBMC version 2.40, IPMI version 1.5 > > _ID_ SDR_Type_xx Sz Own Typ S_Num Sens_Description Hex & Interp Reading > > 0001 SDR EvtO 03 15 20 01 snum 01 LAN Scrty = 00 00 00 00 OK > > 0002 SDR EvtO 03 14 20 01 snum 02 Password = 00 00 00 00 OK > > 0003 SDR EvtO 03 14 20 01 snum 03 PWRGOOD# = 00 00 00 00 OK > > 0004 SDR EvtO 03 12 20 01 snum 04 Button = 00 00 00 00 OK > > 0005 SDR EvtO 03 15 20 01 snum 05 Watchdog2 = 00 00 00 00 OK > > 0006 SDR EvtO 03 19 20 01 snum 06 SyS Boot Init = 00 00 00 00 OK > > 0007 SDR EvtO 03 14 20 01 snum 07 Sys Evnt = 00 00 00 00 OK > > 0008 SDR EvtO 03 17 20 01 snum 08 Pltfrm Evnt = 00 00 00 00 OK > > 0009 SDR IPMB 12 17 dev: 20 00 07 01 PC87431 mBMC > > 000a SDR Comp 02 29 20 05 snum 09 Chassis Intru. = 00 c0 01 00 Warn-lo > > 000b SDR Full 01 33 20 02 snum 0a CPU1 12V = c6 OK 12.37 Volts > > 000c SDR Full 01 33 20 02 snum 0b CPU2 12V = c6 OK 12.37 Volts > > 000d SDR Full 01 39 20 02 snum 0c Baseboard 1.5V = bf OK 1.49 Volts > > 000e SDR Full 01 39 20 02 snum 0d Baseboard 2.5V = be OK 2.49 Volts > > 000f SDR Full 01 39 20 02 snum 0e Baseboard 3.3V = c7 OK 3.42 Volts > > 0010 SDR Full 01 39 20 02 snum 0f Baseboard 5.0V = bf OK 4.97 Volts > > 0011 SDR Full 01 38 20 02 snum 10 Baseboard 12V = c7 OK 12.43 Volts > > 0012 SDR Full 01 39 20 02 snum 11 Baseboard -12V = 46 OK -12.15 Volts > > 0013 SDR Full 01 32 20 02 snum 12 FSB Vtt = 00 OK 0.01 Volts > > 0014 SDR Full 01 32 20 02 snum 13 MCH Vtt = bd OK 1.24 Volts > > 0015 SDR Comp 02 25 20 02 snum 15 Proc1 VCCP = 00 c0 00 00 OK > > 0016 SDR Comp 02 25 20 02 snum 16 Proc2 VCCP = 00 c0 00 00 OK > > 0017 SDR Full 01 34 20 04 snum 17 SYS Fan 3 = 23 OK 2341.92 RPM > > 0018 SDR Full 01 34 20 04 snum 18 SYS Fan 4 = 1d OK 2826.46 RPM > > 0019 SDR Full 01 34 20 04 snum 1b SYS Fan 1 = 21 OK 2546.47 RPM > > 001a SDR Full 01 34 20 04 snum 25 Proc1 Fan = 0f OK 5602.24 RPM > > 001b SDR Full 01 34 20 04 snum 26 Proc2 Fan = 10 OK 5252.10 RPM > > 001c SDR Full 01 3a 20 01 snum 27 Proc1 Core Temp = 1c OK 28.00 degrees C > > 001d SDR Full 01 3a 20 01 snum 28 Proc2 Core Temp = 20 OK 32.00 degrees C > > 001e SDR Full 01 36 20 01 snum 2a System Temp = 1b OK 27.00 degrees C > > 001f SDR Comp 02 2b 20 13 snum 23 Interrupt Button = 00 c0 00 00 OK > > 0020 SDR Comp 02 24 20 14 snum 24 ID Button = 00 c0 00 00 OK > > 0021 SDR Comp 02 2b 20 07 snum 29 CPU Config Error = 00 c0 00 00 OK > > 0022 SDR Comp 02 25 20 07 snum 1d Proc1 IERR = 00 c0 00 00 OK > > 0023 SDR Comp 02 25 20 07 snum 1e Proc2 IERR = 00 c0 00 00 OK > > 0024 SDR Comp 02 2a 20 07 snum 1f P1 Thermal Trip = 00 c0 00 00 OK > > 0025 SDR Comp 02 2a 20 07 snum 20 P2 Thermal Trip = 00 c0 00 00 OK > > 0026 SDR Full 01 39 20 01 snum 21 Proc1 Throttle = 00 OK 0.00 > unspecified > > 0027 SDR Full 01 39 20 01 snum 22 Proc2 Throttle = 00 OK 0.00 > unspecified > > 0028 SDR FRU 11 13 dev: 20 01 80 00 07 01 HOST FRU > > 0029 SDR OEM c0 13 Intel: SDR Package 1.50 > > > > > > > > linux-server:~ # sensors > > bmc-i2c-1-00 > > Adapter: IPMI adapter > > in1: +12.31 V (min = +10.82 V, max = +13.55 V) > > in2: +12.25 V (min = +10.82 V, max = +13.55 V) > > in3: +12.25 V (min = +1.38 V, max = +1.63 V) > > in4: +1.50 V (min = +2.25 V, max = +2.76 V) > > in5: +2.49 V (min = +3.03 V, max = +3.64 V) > > in6: +3.42 V (min = +4.35 V, max = +5.55 V) > > in7: +5.00 V (min = +10.82 V, max = +13.55 V) > > in8: +12.37 V (min = -13.53 V, max = -10.20 V) > > in9: -12.18 V (min = +1.10 V, max = +1.30 V) > > in10: +0.01 V (min = +1.13 V, max = +1.38 V) > > fan1: 0 RPM (min = 1343 RPM) > > fan2: 0 RPM (min = 1343 RPM) > > fan3: 0 RPM (min = 1750 RPM) > > fan4: 0 RPM (min = 700 RPM) > > fan5: 0 RPM (min = 700 RPM) > > temp1: +0.0?C (high = +88?C, hyst = +2?C) > > temp2: +0.0?C (high = +88?C, hyst = +2?C) > > temp3: +0.0?C (high = +65?C, hyst = +1?C) > > temp4: +0.0?C (high = +0?C, hyst = +0?C) > > temp5: +0.0?C (high = +0?C, hyst = +0?C) > > > > IPMI-i2c-0-42 > > Adapter: SMBus I801 adapter at 0400 > > > > eeprom-i2c-0-51 > > Adapter: SMBus I801 adapter at 0400 > > Memory type: DDR SDRAM DIMM > > Memory size (MB): 512 > > > > eeprom-i2c-0-50 > > Adapter: SMBus I801 adapter at 0400 > > Memory type: DDR SDRAM DIMM > > Memory size (MB): 512 > > > > > > linux-server:~ # lsmod |grep ipmi > > i2c_ipmi 21904 0 > > ipmi_smb 35232 2 > > ipmi_devintf 27664 0 > > ipmi_msghandler 51840 4 bmcsensors,i2c_ipmi,ipmi_smb,ipmi_devintf > > i2c_core 46720 7 > bmcsensors,i2c_ipmi,ipmi_smb,i2c_dev,eeprom,i2c_sensor,i2c_i801 > > > > > > linux-server:~ # lsmod |grep i2c > > i2c_ipmi 21904 0 > > ipmi_msghandler 51840 4 bmcsensors,i2c_ipmi,ipmi_smb,ipmi_devintf > > i2c_dev 29056 0 > > i2c_sensor 20096 1 eeprom > > i2c_i801 27188 1 > > i2c_core 46720 7 > bmcsensors,i2c_ipmi,ipmi_smb,i2c_dev,eeprom,i2c_sensor,i2c_i801 > > > > > > ----- Original Message ----- > From: "Rudolf Marek" <r.marek at sh.cvut.cz> > To: "Mark Studebaker" <mds at mds.gotdns.com> > Cc: "LM Sensors" <lm-sensors at lm-sensors.org>; "Corey Minyard" > <minyard at acm.org>; "Yani Ioannou" <yani.ioannou at gmail.com>; "Herman van > Eijk" <hveijk at aweta.nl>; <mail at schaefer-raumgestaltung.de> > Sent: Sunday, October 23, 2005 10:34 PM > Subject: Re: 87431 update > > > >>Mark Studebaker wrote: >> >>>Great news, >>>I've successfully implemented bmcsensors-over-IPMI-over-SMB, working >>>on the Intel Server donated by Aweta. >> >>Cool. Congrats :) >> >> >> >>>HW: >>> Intel Server Platform SR1325TP1-E w/ 6300ESB SMBus and PC87431 at > > 0x42 > >>Please will you go through mailing list and notify other people that were > > fighting with it? > >>(I'm CCing Uli) and I think some of other asked in ticket system. >> >>Unfortunately I'm not very skilled on this IMPI/BMC field. Please could > > you write the general HOWTO for > >>people with server boards? (and for me to point them to this howto) >> >>1) How to know they have bmc, ipmi .. >>2) what patches they need >>3) how to obtain results. >> >>Thank you very much. >> >>Regards >>Rudolf >> >> > > >
