Hans, I will get back with you on the force=1 bit. But about the question with winxp. Everything works fine. Abit's uguru program reads the sensors correctly. On 10/29/05, Hans de Goede <j.w.r.degoede at hhs.nl> wrote: > > > > Matthew Stamp wrote: > > Hans, > > > > Since my last email I have upgraded to 2.6.14 and got all the nessasary > > modules in place. Although I have nothing in my /sys/bus/i2c/devices. > > I do have abituguru and i2c_adapter in the drivers section. I was > > talking with ollie long ago about this also. It seems his program > > openguru doesn't work on my board either, I have a AN7 bios v.19. Yes > > I know it is been proven to work with this board but for some reason it > > does not with mine. When I use the openguru program it just simply > > states that uguru was not found. > > > > > > Could you rmmod the driver and insmod it as follows: > insmod <path>/abituguru.ko force=1 > > That should skip the early part of the detection phase, instead it will > just assume the uguru is there and do a testread, if the testread > however fails then it will still not register (show up under > /sys/bus/i2c/devices). > > If the testread fails we do btw have a real problem, but lets take this > one step at a time. Have you ever had this working under windows? and do > the bios readings seem sane, there is a small chance you've just got a > busted uGuru. > > Regards, > > Hans >
