Matthew Stamp wrote: > Hans, > > Since my last email I have upgraded to 2.6.14 and got all the nessasary > modules in place. Although I have nothing in my /sys/bus/i2c/devices. > I do have abituguru and i2c_adapter in the drivers section. I was > talking with ollie long ago about this also. It seems his program > openguru doesn't work on my board either, I have a AN7 bios v.19. Yes > I know it is been proven to work with this board but for some reason it > does not with mine. When I use the openguru program it just simply > states that uguru was not found. > > Could you rmmod the driver and insmod it as follows: insmod <path>/abituguru.ko force=1 That should skip the early part of the detection phase, instead it will just assume the uguru is there and do a testread, if the testread however fails then it will still not register (show up under /sys/bus/i2c/devices). If the testread fails we do btw have a real problem, but lets take this one step at a time. Have you ever had this working under windows? and do the bios readings seem sane, there is a small chance you've just got a busted uGuru. Regards, Hans