Hans, Since my last email I have upgraded to 2.6.14 and got all the nessasary modules in place. Although I have nothing in my /sys/bus/i2c/devices. I do have abituguru and i2c_adapter in the drivers section. I was talking with ollie long ago about this also. It seems his program openguru doesn't work on my board either, I have a AN7 bios v.19. Yes I know it is been proven to work with this board but for some reason it does not with mine. When I use the openguru program it just simply states that uguru was not found. Debian Sid 2.6.14 desktop:/home/tfmegatron# lsmod Module Size Used by ipt_limit 1920 11 ipt_LOG 6080 3 ipt_state 1408 4 ip_conntrack 42576 1 ipt_state iptable_filter 2176 1 ip_tables 20480 4 ipt_limit,ipt_LOG,ipt_state,iptable_filter emu10k1_gp 2688 0 gameport 11848 2 emu10k1_gp snd_emu10k1_synth 6720 0 snd_emux_synth 36544 1 snd_emu10k1_synth snd_seq_virmidi 6080 1 snd_emux_synth snd_seq_midi_emul 6528 1 snd_emux_synth snd_seq_dummy 2628 0 snd_seq_oss 33344 0 snd_seq_midi 6944 0 snd_seq_midi_event 6272 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi snd_seq 51344 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_emu10k1 120036 1 snd_emu10k1_synth snd_rawmidi 21600 3 snd_seq_virmidi,snd_seq_midi,snd_emu10k1 snd_seq_device 6988 8 snd_emu10k1_synth,snd_emux_synth,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_emu10k1,snd_rawmidi snd_ac97_codec 93884 1 snd_emu10k1 snd_pcm_oss 50208 0 snd_mixer_oss 17536 1 snd_pcm_oss snd_pcm 85000 3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss snd_timer 22340 3 snd_seq,snd_emu10k1,snd_pcm snd_ac97_bus 1792 1 snd_ac97_codec snd_page_alloc 8456 2 snd_emu10k1,snd_pcm snd_util_mem 3328 2 snd_emux_synth,snd_emu10k1 snd_hwdep 7328 2 snd_emux_synth,snd_emu10k1 snd 47012 13 snd_emux_synth,snd_seq_virmidi,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep soundcore 7904 1 snd ohci1394 33012 0 ieee1394 90164 1 ohci1394 nvidia 3904188 12 lp 9412 0 parport_pc 26116 1 parport 34888 2 lp,parport_pc Anything else you might want to look at just ask. Thanks for your time. matt On 10/27/05, Hans de Goede <j.w.r.degoede at hhs.nl> wrote: > > > > Matt Stamp wrote: > > I am getting an error when trying to insert module and it will not > force. > > > > I get. > > > > insmod abituguru.ko > > insmod: error inserting 'abituguru.ko' : -1 Unknown symbol in module > > > > I am using debian unstable with kernel 2.6.13.4 <http://2.6.13.4>. > > _______________________________________________ > > lm-sensors mailing list > > lm-sensors at lm-sensors.org > > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors > > > > Yes, my mistake (in the docs), you should use kernel 2.6.14rc4 or newer > 2.6.13 is not new enough. > > Regards, > > Hans > > _______________________________________________ > lm-sensors mailing list > lm-sensors at lm-sensors.org > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors >
