Hi David, Sorry for the delay. > I've just started to play with lm-sensors, and have almost got it > working... however, I'm getting some bogus values, and some others are > missing: > - -12V is bogus FAQ 4.6.1 "-5V and -12V readings are way out of range! It's very frequent that negative voltage lines are not wired because motherboard manufacturers don't think they're worth monitoring (they are mostly unused these days). You can just add ignore inN lines to /etc/sensors.conf to hide them." Another possibility is that these lines are used to monitor different voltages. If this is the case, only the motherboard manufacturer can tell, or maybe you can have a look at what voltage values your BIOS displays, if any. > - Vbat looks bogus Maybe it's simply not wired. Same rules apply as for negative voltages. > - fan1 and fan2 both zero (even though 1 fan is installed and turning) FAQ 4.1.1 "Fans sometimes/always read 0!! You may not have a three-wire fan, which is required. You may need to increase the 'fan divisor'. See doc/fan-divisors in our package for further information." > My motherboard is an ASRock K7S41, and the sensor appears to be a > S83627HF In fact it appears to be a W83697HF. All these chips have very similar names but slightly different feature sets, so you should be careful when announcing the name of your chip. > ????? Why is the algorithm unavailable Because the Linux 2.6 i2c layer doesn't provide an access to it. I tend to think we should stop displaying it, as more people are now using 2.6 kernels and it is confusing. Nobody really cares about the algorithm, it's an internal implementation detail. -- Jean Delvare
