[PATCH 2.6] I2C: w83781d: remove non-i2c sensor chips

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Greg,

This patch removes the support for the W83697HF and W83627THF chips from
the w83781d driver. These chips have no I2C/SMBus interface and are
better supported by the Super-I/O-based w83627hf driver. Documentation
was updated to reflect the support drop.

Please apply,
thanks.

Signed-off-by: Grant Coady <gcoady at gmail.com>
Signed-off-by: Jean Delvare <khali at linux-fr.org>

 Documentation/i2c/chips/w83781d |   16 +-------
 drivers/i2c/chips/w83781d.c     |   72 +++++++++++-----------------------------
 2 files changed, 24 insertions(+), 64 deletions(-)

--- linux-2.6.12-rc6.orig/Documentation/i2c/chips/w83781d	2005-06-07 20:31:25.000000000 +0200
+++ linux-2.6.12-rc6/Documentation/i2c/chips/w83781d	2005-06-16 19:20:49.000000000 +0200
@@ -18,14 +18,6 @@
     Prefix: 'w83627hf'
     Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
     Datasheet: http://www.winbond.com/PDF/sheet/w83627hf.pdf
-  * Winbond W83627THF
-    Prefix: 'w83627thf'
-    Addresses scanned: ISA address 0x290 (8 I/O ports)
-    Datasheet: http://www.winbond.com/PDF/sheet/w83627thf.pdf
-  * Winbond W83697HF
-    Prefix: 'w83697hf'
-    Addresses scanned: ISA 0x290 (8 I/O ports)
-    Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83697hf.pdf
   * Asus AS99127F
     Prefix: 'as99127f'
     Addresses scanned: I2C 0x28 - 0x2f
@@ -53,9 +45,9 @@
 Description
 -----------
 
-This driver implements support for the Winbond W83627HF, W83627THF, W83781D,
-W83782D, W83783S, W83697HF chips, and the Asus AS99127F chips. We will refer
-to them collectively as W8378* chips.
+This driver implements support for the Winbond W83781D, W83782D, W83783S,
+W83627HF chips, and the Asus AS99127F chips. We will refer to them
+collectively as W8378* chips.
 
 There is quite some difference between these chips, but they are similar
 enough that it was sensible to put them together in one driver.
@@ -67,10 +59,8 @@
 as99127f rev.2 (type_name = as99127f)       0x31    0x5ca3  yes     no
 w83781d     7       3       0       3       0x10-1  0x5ca3  yes     yes
 w83627hf    9       3       2       3       0x21    0x5ca3  yes     yes(LPC)
-w83627thf   9       3       2       3       0x90    0x5ca3  no      yes(LPC)
 w83782d     9       3       2-4     3       0x30    0x5ca3  yes     yes
 w83783s     5-6     3       2       1-2     0x40    0x5ca3  yes     no
-w83697hf    8       2       2       2       0x60    0x5ca3  no      yes(LPC)
 
 Detection of these chips can sometimes be foiled because they can be in
 an internal state that allows no clean access. If you know the address
--- linux-2.6.12-rc6.orig/drivers/i2c/chips/w83781d.c	2005-06-07 20:12:54.000000000 +0200
+++ linux-2.6.12-rc6/drivers/i2c/chips/w83781d.c	2005-06-16 19:08:27.000000000 +0200
@@ -28,10 +28,8 @@
     as99127f rev.2 (type_name = as99127f)	0x31	0x5ca3	yes	no
     w83781d	7	3	0	3	0x10-1	0x5ca3	yes	yes
     w83627hf	9	3	2	3	0x21	0x5ca3	yes	yes(LPC)
-    w83627thf	9	3	2	3	0x90	0x5ca3	no	yes(LPC)
     w83782d	9	3	2-4	3	0x30	0x5ca3	yes	yes
     w83783s	5-6	3	2	1-2	0x40	0x5ca3	yes	no
-    w83697hf	8	2	2	2	0x60	0x5ca3	no	yes(LPC)
 
 */
 
@@ -52,7 +50,7 @@
 static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END };
 
 /* Insmod parameters */
-SENSORS_INSMOD_6(w83781d, w83782d, w83783s, w83627hf, as99127f, w83697hf);
+SENSORS_INSMOD_5(w83781d, w83782d, w83783s, w83627hf, as99127f);
 I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
 		    "{bus, clientaddr, subclientaddr1, subclientaddr2}");
 
@@ -998,13 +996,6 @@
 		err = -EINVAL;
 		goto ERROR0;
 	}
-	if (!is_isa && kind == w83697hf) {
-		dev_err(&adapter->dev,
-			"Cannot force ISA-only chip for I2C address 0x%02x.\n",
-			address);
-		err = -EINVAL;
-		goto ERROR0;
-	}
 	
 	if (is_isa)
 		if (!request_region(address, W83781D_EXTENT,
@@ -1137,12 +1128,10 @@
 		else if (val1 == 0x40 && vendid == winbond && !is_isa
 				&& address == 0x2d)
 			kind = w83783s;
-		else if ((val1 == 0x21 || val1 == 0x90) && vendid == winbond)
+		else if (val1 == 0x21 && vendid == winbond)
 			kind = w83627hf;
 		else if (val1 == 0x31 && !is_isa && address >= 0x28)
 			kind = as99127f;
-		else if (val1 == 0x60 && vendid == winbond && is_isa)
-			kind = w83697hf;
 		else {
 			if (kind == 0)
 				dev_warn(&new_client->dev, "Ignoring 'force' "
@@ -1161,14 +1150,9 @@
 	} else if (kind == w83783s) {
 		client_name = "w83783s";
 	} else if (kind == w83627hf) {
-		if (val1 == 0x90)
-			client_name = "w83627thf";
-		else
-			client_name = "w83627hf";
+		client_name = "w83627hf";
 	} else if (kind == as99127f) {
 		client_name = "as99127f";
-	} else if (kind == w83697hf) {
-		client_name = "w83697hf";
 	}
 
 	/* Fill in the remaining client fields and put into the global list */
@@ -1206,7 +1190,7 @@
 
 	/* Register sysfs hooks */
 	device_create_file_in(new_client, 0);
-	if (kind != w83783s && kind != w83697hf)
+	if (kind != w83783s)
 		device_create_file_in(new_client, 1);
 	device_create_file_in(new_client, 2);
 	device_create_file_in(new_client, 3);
@@ -1220,24 +1204,19 @@
 
 	device_create_file_fan(new_client, 1);
 	device_create_file_fan(new_client, 2);
-	if (kind != w83697hf)
-		device_create_file_fan(new_client, 3);
+	device_create_file_fan(new_client, 3);
 
 	device_create_file_temp(new_client, 1);
 	device_create_file_temp(new_client, 2);
-	if (kind != w83783s && kind != w83697hf)
+	if (kind != w83783s)
 		device_create_file_temp(new_client, 3);
 
-	if (kind != w83697hf)
-		device_create_file_vid(new_client);
-
-	if (kind != w83697hf)
-		device_create_file_vrm(new_client);
+	device_create_file_vid(new_client);
+	device_create_file_vrm(new_client);
 
 	device_create_file_fan_div(new_client, 1);
 	device_create_file_fan_div(new_client, 2);
-	if (kind != w83697hf)
-		device_create_file_fan_div(new_client, 3);
+	device_create_file_fan_div(new_client, 3);
 
 	device_create_file_alarms(new_client);
 
@@ -1256,7 +1235,7 @@
 	if (kind != as99127f && kind != w83781d) {
 		device_create_file_sensor(new_client, 1);
 		device_create_file_sensor(new_client, 2);
-		if (kind != w83783s && kind != w83697hf)
+		if (kind != w83783s)
 			device_create_file_sensor(new_client, 3);
 	}
 
@@ -1479,7 +1458,7 @@
 				else
 					data->sens[i - 1] = 2;
 			}
-			if ((type == w83783s || type == w83697hf) && (i == 2))
+			if (type == w83783s && i == 2)
 				break;
 		}
 	}
@@ -1495,7 +1474,7 @@
 		}
 
 		/* Enable temp3 */
-		if (type != w83783s && type != w83697hf) {
+		if (type != w83783s) {
 			tmp = w83781d_read_value(client,
 				W83781D_REG_TEMP3_CONFIG);
 			if (tmp & 0x01) {
@@ -1536,8 +1515,7 @@
 		dev_dbg(dev, "Starting device update\n");
 
 		for (i = 0; i <= 8; i++) {
-			if ((data->type == w83783s || data->type == w83697hf)
-			    && (i == 1))
+			if (data->type == w83783s && i == 1)
 				continue;	/* 783S has no in1 */
 			data->in[i] =
 			    w83781d_read_value(client, W83781D_REG_IN(i));
@@ -1545,7 +1523,7 @@
 			    w83781d_read_value(client, W83781D_REG_IN_MIN(i));
 			data->in_max[i] =
 			    w83781d_read_value(client, W83781D_REG_IN_MAX(i));
-			if ((data->type != w83782d) && (data->type != w83697hf)
+			if ((data->type != w83782d)
 			    && (data->type != w83627hf) && (i == 6))
 				break;
 		}
@@ -1581,7 +1559,7 @@
 		    w83781d_read_value(client, W83781D_REG_TEMP_OVER(2));
 		data->temp_max_hyst_add[0] =
 		    w83781d_read_value(client, W83781D_REG_TEMP_HYST(2));
-		if (data->type != w83783s && data->type != w83697hf) {
+		if (data->type != w83783s) {
 			data->temp_add[1] =
 			    w83781d_read_value(client, W83781D_REG_TEMP(3));
 			data->temp_max_add[1] =
@@ -1592,26 +1570,18 @@
 					       W83781D_REG_TEMP_HYST(3));
 		}
 		i = w83781d_read_value(client, W83781D_REG_VID_FANDIV);
-		if (data->type != w83697hf) {
-			data->vid = i & 0x0f;
-			data->vid |=
-			    (w83781d_read_value(client, W83781D_REG_CHIPID) &
-			     0x01)
-			    << 4;
-		}
+		data->vid = i & 0x0f;
+		data->vid |= (w83781d_read_value(client,
+					W83781D_REG_CHIPID) & 0x01) << 4;
 		data->fan_div[0] = (i >> 4) & 0x03;
 		data->fan_div[1] = (i >> 6) & 0x03;
-		if (data->type != w83697hf) {
-			data->fan_div[2] = (w83781d_read_value(client,
-							       W83781D_REG_PIN)
-					    >> 6) & 0x03;
-		}
+		data->fan_div[2] = (w83781d_read_value(client,
+					W83781D_REG_PIN) >> 6) & 0x03;
 		if ((data->type != w83781d) && (data->type != as99127f)) {
 			i = w83781d_read_value(client, W83781D_REG_VBAT);
 			data->fan_div[0] |= (i >> 3) & 0x04;
 			data->fan_div[1] |= (i >> 4) & 0x04;
-			if (data->type != w83697hf)
-				data->fan_div[2] |= (i >> 5) & 0x04;
+			data->fan_div[2] |= (i >> 5) & 0x04;
 		}
 		data->alarms =
 		    w83781d_read_value(client,

-- 
Jean Delvare




[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux