beeps is a bitmask with the same definition as alarms, not a counter. this is documented in doc/developer/proc. koz wrote: > I have a KT4AV-L mother board with a w83697hf chip. > > 1. I noticed that the V5SB voltage with the default calc' always shows > something like +5.5* V where as the BIOS shows +5.0* V. If you set the > calc' to "compute in7 ((5.1/10)+1)*@ , @/((5.1/10)+1)" the result is > more consistent with the BIOS. > > > 2. Question - I originally thought that the beep_enable feature wouldn't > work since I couldn't get it to beep, but then when I run sensors -u I > get a line showing the beep_enable followed by a line showing beeps, and > I can set the number of beeps in sensors.conf with something like > > set beep_enable 1 > set beeps 1 > > Is this documented anywhere ? how exactly should it work ? > > regards, Koz > > > > > > >
