On Sunday 26 September 2004 23:51, David Cannings wrote: > On Wednesday 22 September 2004 15:03, Jean Delvare wrote: > > On Wed, 22 Sep 2004 08:49:17 -0400, Mark Studebaker wrote > > > > > If it's not in the RPM and you're running a 2.4 kernel then get our > > > release from our website. We don't make the RPMs. If you're running > > > 2.6 then wait until the port is finished and included in the kernel. > > > > BTW Mark, could you care about reviewing the proposed bmcsensors port and > > submitting it to Greg once it is OK? I think only you have knowledge > > about BMC. I sure don't. I think I also remember you have hardware for > > testing, while I don't. > > I tested this port on an Intel L440GX SMP board and unfortunately did not > have much success. I believe it is due to the fact the board does not > implement IPMI 1.0 (or above). [..] My sincere apologies for this sending three times. I have received 3 error messages from the list server saying it had rejected my message, so I resent it before I'd checked the list. David
