and you have sysfs mounted? zippo wrote: > Agreed, but i don't need it to detect i know what sensors i have, and have a special sensors.conf file from tyan. sensors -s doesn't work. That's all that matters. i2c isn't being placed into the kerenel. > > On Wed, 26 Nov 2003 11:14:10 -0500 > "Mark Studebaker" <mds at paradyne.com> wrote: > > >>sensors-detect doesn't support 2.6 yet >>(as stated on our home page) >> >>zippo wrote: >> >> >>>I am testing lm_sensors on a Tyan k7x-pro, (amd756, w83781d, which are both in the kernel. I got the CVS and installed it. I also built i2c support, (yes CONFIG_I2C_PROC), and ran mkdev.sh (witch worked) but when i run sensors -s, or sensors-detect i get >>> >>>[root at zippo01 /home/zippo/sensors/]#sensors >>>Can't access /proc file >>>Unable to find i2c bus information; >>>For 2.6 kernels, make sure you have mounted sysfs! >>>For older kernels, make sure you have done 'modprobe i2c-proc'! >>> >>> >>>that is the error when i run sensors-detect: >>> >>>Couldn't open /proc/bus/i2c?!? at prog/detect/sensors-detect line 4184, <STDIN> line 4. >>> >>>and there no i2c in /proc, i was wondering if i am doing something wrong or what. >>>a copy of my lsmod: >>> >>>Module Size Used by >>>w83781d 30976 0 >>>i2c_amd756 5504 0 >>>i2c_algo_bit 9608 0 >>>i2c_sensor 2944 1 w83781d >>>i2c_dev 8960 0 >>>i2c_core 20612 5 w83781d,i2c_amd756,i2c_algo_bit,i2c_sensor,i2c_dev >>>nvidia 1532952 12 >>> >> >> >
