Agreed, but i don't need it to detect i know what sensors i have, and have a special sensors.conf file from tyan. sensors -s doesn't work. That's all that matters. i2c isn't being placed into the kerenel. On Wed, 26 Nov 2003 11:14:10 -0500 "Mark Studebaker" <mds at paradyne.com> wrote: > sensors-detect doesn't support 2.6 yet > (as stated on our home page) > > zippo wrote: > > > I am testing lm_sensors on a Tyan k7x-pro, (amd756, w83781d, which are both in the kernel. I got the CVS and installed it. I also built i2c support, (yes CONFIG_I2C_PROC), and ran mkdev.sh (witch worked) but when i run sensors -s, or sensors-detect i get > > > > [root at zippo01 /home/zippo/sensors/]#sensors > > Can't access /proc file > > Unable to find i2c bus information; > > For 2.6 kernels, make sure you have mounted sysfs! > > For older kernels, make sure you have done 'modprobe i2c-proc'! > > > > > > that is the error when i run sensors-detect: > > > > Couldn't open /proc/bus/i2c?!? at prog/detect/sensors-detect line 4184, <STDIN> line 4. > > > > and there no i2c in /proc, i was wondering if i am doing something wrong or what. > > a copy of my lsmod: > > > > Module Size Used by > > w83781d 30976 0 > > i2c_amd756 5504 0 > > i2c_algo_bit 9608 0 > > i2c_sensor 2944 1 w83781d > > i2c_dev 8960 0 > > i2c_core 20612 5 w83781d,i2c_amd756,i2c_algo_bit,i2c_sensor,i2c_dev > > nvidia 1532952 12 > > > >
