On Friday 27 June 2003 02:22 pm, you wrote: > > Could be... But there is one last thing I would like to try. My changes > (-k3) don't seem to have had any effect, so I'm trying something similar > but different. Please get > http://www.ensicaen.ismra.fr/~delvare/sensors-detect-k4 > and tell me, again, it it behaves differently with and without an UTF-8 > locale. That seemed to fix it!!! without UTF8...... Probing for `ITE IT8705F / IT8712F / SiS 950' Trying address 0x0290... Called inb with port=657 After sysseek After sysread, nrchars=1 Read value with ord=255 Returning res=255 Called inb with port=658 After sysseek After sysread, nrchars=1 Read value with ord=255 Returning res=255 Called inb with port=659 After sysseek After sysread, nrchars=1 Read value with ord=255 Returning res=255 Called inb with port=663 After sysseek After sysread, nrchars=1 Read value with ord=255 Returning res=255 Called inb with port=661 After sysseek After sysread, nrchars=1 Read value with ord=79 Returning res=79 Called inb with port=661 After sysseek After sysread, nrchars=1 Read value with ord=176 Returning res=176 Called inb with port=662 After sysseek After sysread, nrchars=1 Read value with ord=17 Returning res=17 Called inb with port=662 After sysseek After sysread, nrchars=1 Read value with ord=144 Returning res=144 Success! (confidence 8, driver `it87') Probing for `IPMI BMC KCS' Trying address 0x0ca0... Called inb with port=3235 After sysseek After sysread, nrchars=1 Read value with ord=255 Returning res=255 Failed! ================================================= with UTF8 Probing for `ITE IT8705F / IT8712F / SiS 950' Trying address 0x0290... Called inb with port=657 After sysseek After sysread, nrchars=1 Read value with ord=255 Returning res=255 Called inb with port=658 After sysseek After sysread, nrchars=1 Read value with ord=255 Returning res=255 Called inb with port=659 After sysseek After sysread, nrchars=1 Read value with ord=255 Returning res=255 Called inb with port=663 After sysseek After sysread, nrchars=1 Read value with ord=255 Returning res=255 Called inb with port=661 After sysseek After sysread, nrchars=1 Read value with ord=79 Returning res=79 Called inb with port=661 After sysseek After sysread, nrchars=1 Read value with ord=176 Returning res=176 Called inb with port=662 After sysseek After sysread, nrchars=1 Read value with ord=17 Returning res=17 Called inb with port=662 After sysseek After sysread, nrchars=1 Read value with ord=144 Returning res=144 Success! (confidence 8, driver `it87') Probing for `IPMI BMC KCS' Trying address 0x0ca0... Called inb with port=3235 After sysseek After sysread, nrchars=1 Read value with ord=255 Returning res=255 Failed!
