see doc/vid Marcio Veloso Antunes wrote: > Hi guys, > > My CPU core voltage is 2.2v, but a funny value of 1.450 is found. Do you know what > can i do to fix this ? > > Thanks, > Marcio Veloso > > P.S.: I have an ASUS P5AB > > > root at mveloso:/etc/mail# lsmod > Module Size Used by Tainted: P > eeprom 3536 0 > w83781d 19448 0 > i2c-proc 6288 0 [eeprom w83781d] > i2c-isa 1228 0 (unused) > i2c-ali15x3 4212 0 (unused) > i2c-core 14512 0 [eeprom w83781d i2c-proc i2c-isa i2c-ali15x3] > nvidia 1467168 10 (autoclean) > > > root at mveloso:/etc/mail# cat /proc/sys/dev/sensors/w83781d-isa-0290/vrm > 9.0 > > > > root at mveloso:/etc/mail# cat /proc/sys/dev/sensors/w83781d-isa-0290/vid > 1.450 > > > > root at mveloso:/etc/mail# sensors > w83781d-isa-0290 > Adapter: ISA adapter > Algorithm: ISA algorithm > VCore 1: +2.19 V (min = +1.37 V, max = +1.52 V) ALARM > VCore 2: +2.19 V (min = +1.37 V, max = +1.52 V) ALARM > +3.3V: +3.48 V (min = +3.13 V, max = +3.45 V) ALARM > +5V: +4.77 V (min = +4.72 V, max = +5.24 V) > +12V: +12.01 V (min = +11.36 V, max = +12.58 V) > -12V: -11.82 V (min = -12.55 V, max = -11.33 V) > -5V: -4.98 V (min = -5.24 V, max = -4.74 V) > fan2: 5113 RPM (min = 3000 RPM, div = 2) > temp1: +35?C (limit = +60?C) > temp2: +33.5?C (limit = +60?C, hysteresis = +50?C) > temp3: +208.0?C (limit = +60?C, hysteresis = +50?C) > vid: +1.450 V > alarms: > beep_enable: > Sound alarm disabled > > eeprom-i2c-0-50 > Adapter: SMBus ALI15X3 adapter at e800 > Algorithm: Non-I2C SMBus adapter > Memory type: SDRAM DIMM SPD > Memory size (MB): 64 > > eeprom-i2c-0-51 > Adapter: SMBus ALI15X3 adapter at e800 > Algorithm: Non-I2C SMBus adapter > Memory type: SDRAM DIMM SPD > Memory size (MB): 128 > > > > root at mveloso:/etc/mail# lspci -v > 00:00.0 Host bridge: Acer Laboratories Inc. [ALi] M1541 (rev 04) > Subsystem: Acer Laboratories Inc. [ALi] ALI M1541 Aladdin V/V+ AGP System Controller > Flags: bus master, slow devsel, latency 64 > Memory at e0000000 (32-bit, non-prefetchable) [size=64M] > Capabilities: [b0] AGP version 1.0 > > 00:01.0 PCI bridge: Acer Laboratories Inc. [ALi] M1541 PCI to AGP Controller (rev 04) (prog-if 00 [Normal decode]) > Flags: bus master, slow devsel, latency 64 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 > Memory behind bridge: df000000-dfffffff > Prefetchable memory behind bridge: e5f00000-e7ffffff > > 00:02.0 USB Controller: Acer Laboratories Inc. [ALi] USB 1.1 Controller (rev 03) (prog-if 10 [OHCI]) > Flags: bus master, medium devsel, latency 64, IRQ 9 > Memory at de800000 (32-bit, non-prefetchable) [size=4K] > > 00:03.0 Bridge: Acer Laboratories Inc. [ALi] M7101 PMU > Subsystem: Acer Laboratories Inc. [ALi] ALI M7101 Power Management Controller > Flags: medium devsel > I/O ports at <ignored> > I/O ports at <ignored> > > 00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge [Aladdin IV] (rev c3) > Flags: bus master, medium devsel, latency 0 > > 00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) > Subsystem: Realtek Semiconductor Co., Ltd. RT8029(AS) > Flags: medium devsel, IRQ 11 > I/O ports at d800 [size=32] > > 00:0f.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c1) (prog-if 8a [Master SecP PriP]) > Flags: bus master, medium devsel, latency 32 > I/O ports at d400 [size=16] > > 01:00.0 VGA compatible controller: nVidia Corporation NV5 [Riva TnT2] (rev 15) (prog-if 00 [VGA]) > Subsystem: Diamond Multimedia Systems Viper V770 > Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 12 > Memory at df000000 (32-bit, non-prefetchable) [size=16M] > Memory at e6000000 (32-bit, prefetchable) [size=32M] > Expansion ROM at e5ff0000 [disabled] [size=64K] > Capabilities: [60] Power Management version 1 > Capabilities: [44] AGP version 2.0 >
