Hi guys,
My CPU core voltage is 2.2v, but a funny value of 1.450 is found. Do you know what
can i do to fix this ?
Thanks,
Marcio Veloso
P.S.: I have an ASUS P5AB
root at mveloso:/etc/mail# lsmod
Module Size Used by Tainted: P
eeprom 3536 0
w83781d 19448 0
i2c-proc 6288 0 [eeprom w83781d]
i2c-isa 1228 0 (unused)
i2c-ali15x3 4212 0 (unused)
i2c-core 14512 0 [eeprom w83781d i2c-proc i2c-isa i2c-ali15x3]
nvidia 1467168 10 (autoclean)
root at mveloso:/etc/mail# cat /proc/sys/dev/sensors/w83781d-isa-0290/vrm
9.0
root at mveloso:/etc/mail# cat /proc/sys/dev/sensors/w83781d-isa-0290/vid
1.450
root at mveloso:/etc/mail# sensors
w83781d-isa-0290
Adapter: ISA adapter
Algorithm: ISA algorithm
VCore 1: +2.19 V (min = +1.37 V, max = +1.52 V) ALARM
VCore 2: +2.19 V (min = +1.37 V, max = +1.52 V) ALARM
+3.3V: +3.48 V (min = +3.13 V, max = +3.45 V) ALARM
+5V: +4.77 V (min = +4.72 V, max = +5.24 V)
+12V: +12.01 V (min = +11.36 V, max = +12.58 V)
-12V: -11.82 V (min = -12.55 V, max = -11.33 V)
-5V: -4.98 V (min = -5.24 V, max = -4.74 V)
fan2: 5113 RPM (min = 3000 RPM, div = 2)
temp1: +35?C (limit = +60?C)
temp2: +33.5?C (limit = +60?C, hysteresis = +50?C)
temp3: +208.0?C (limit = +60?C, hysteresis = +50?C)
vid: +1.450 V
alarms:
beep_enable:
Sound alarm disabled
eeprom-i2c-0-50
Adapter: SMBus ALI15X3 adapter at e800
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
Memory size (MB): 64
eeprom-i2c-0-51
Adapter: SMBus ALI15X3 adapter at e800
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
Memory size (MB): 128
root at mveloso:/etc/mail# lspci -v
00:00.0 Host bridge: Acer Laboratories Inc. [ALi] M1541 (rev 04)
Subsystem: Acer Laboratories Inc. [ALi] ALI M1541 Aladdin V/V+ AGP System Controller
Flags: bus master, slow devsel, latency 64
Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [b0] AGP version 1.0
00:01.0 PCI bridge: Acer Laboratories Inc. [ALi] M1541 PCI to AGP Controller (rev 04) (prog-if 00 [Normal decode])
Flags: bus master, slow devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: df000000-dfffffff
Prefetchable memory behind bridge: e5f00000-e7ffffff
00:02.0 USB Controller: Acer Laboratories Inc. [ALi] USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at de800000 (32-bit, non-prefetchable) [size=4K]
00:03.0 Bridge: Acer Laboratories Inc. [ALi] M7101 PMU
Subsystem: Acer Laboratories Inc. [ALi] ALI M7101 Power Management Controller
Flags: medium devsel
I/O ports at <ignored>
I/O ports at <ignored>
00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge [Aladdin IV] (rev c3)
Flags: bus master, medium devsel, latency 0
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
Subsystem: Realtek Semiconductor Co., Ltd. RT8029(AS)
Flags: medium devsel, IRQ 11
I/O ports at d800 [size=32]
00:0f.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c1) (prog-if 8a [Master SecP PriP])
Flags: bus master, medium devsel, latency 32
I/O ports at d400 [size=16]
01:00.0 VGA compatible controller: nVidia Corporation NV5 [Riva TnT2] (rev 15) (prog-if 00 [VGA])
Subsystem: Diamond Multimedia Systems Viper V770
Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 12
Memory at df000000 (32-bit, non-prefetchable) [size=16M]
Memory at e6000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at e5ff0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Capabilities: [44] AGP version 2.0
