> I am having problems getting lm_sensors and the i2c CVS to work with > my motherboard. > > I have a DFI CS35-TL Motherboard, which is using a 82801BA chip for > bus (control?) and a W83627HF for sensors. (These are the numbers on > the ICs on the M/B) > > I d/l'ed the source for Kernel 2.4.20, and succesfully compiled and > booted my system with it. I grabbed the CVS for the 2.4 kernel series > for both i2c and lm-sensors and they compile without problems. (Thanks > for the warning about dual versions of modules during 'make install'.) > > On booting I see a [insmod?] error with xxx_voodoo.o, but can't seem > to track this down in any of the log-files from /var/log/, but as I > don't have this chip on the M/B I'm not too sure it's relevant to this > problem. > > I have tried to gather as much information as I can from the various > utilities in prog/detect/ as well as using 'lsmod', 'lspci' and > 'dmesg'. I have attached these in the archive 'logs.tgz'. The contents > are: dmesg.txt > dmidecode.txt > i2cdetect.txt > isadump.txt > lsmod.txt > lspci.txt > sensors-detect output.txt > > I'm not too certain what else I can do... can you suggest any ways > that I can either get things working, or assist you in tracking my > problem down further? I took a look at the files and I cannot conclude. It seems that the bus drivers (i810 and/or i801) won't load but I can't tell why. Just one question: Why do you need CVS? I'd like you to try with 2.6.5 or 2.7.0 and see what happens. CVS is known to be rather unstable these days. -- Jean Delvare http://www.ensicaen.ismra.fr/~delvare/
