Hi, I am having problems getting lm_sensors and the i2c CVS to work with my motherboard. I have a DFI CS35-TL Motherboard, which is using a 82801BA chip for bus (control?) and a W83627HF for sensors. (These are the numbers on the ICs on the M/B) I d/l'ed the source for Kernel 2.4.20, and succesfully compiled and booted my system with it. I grabbed the CVS for the 2.4 kernel series for both i2c and lm-sensors and they compile without problems. (Thanks for the warning about dual versions of modules during 'make install'.) On booting I see a [insmod?] error with xxx_voodoo.o, but can't seem to track this down in any of the log-files from /var/log/, but as I don't have this chip on the M/B I'm not too sure it's relevant to this problem. I have tried to gather as much information as I can from the various utilities in prog/detect/ as well as using 'lsmod', 'lspci' and 'dmesg'. I have attached these in the archive 'logs.tgz'. The contents are: dmesg.txt dmidecode.txt i2cdetect.txt isadump.txt lsmod.txt lspci.txt sensors-detect output.txt I'm not too certain what else I can do... can you suggest any ways that I can either get things working, or assist you in tracking my problem down further? Thanks for any help you can give, Jeremy -------------- next part -------------- A non-text attachment was scrubbed... Name: logs.tgz Type: application/x-tgz Size: 7004 bytes Desc: not available Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20030321/97181ab0/attachment.bin
