you don't have the 7101 device in lspci; see prog/hotplug/README. Andrew Basterfield wrote: > Hi > > I've been trying to get the motherboard sensors to work on my gigabyte > GA-5AA (Alladin V chipset) board, I know they are there 'cos my fan has > 3 wires, and a few years back I got some motherboard voltages in > window$. > > It seems that i2c bus should be supported by the ali15x3 driver (agpgart > and the IDE driver both report ALI15x3) but it won't find it. I am > running kernel 2.5.53 with the 2.5.53-i2c-1-patch & 2.5.53-i2c-5-patch > linked from your website. The patches don't apply cleanly to virgin > kernel source, I had to merge bits in by hand. > > Any suggestions where to start hacking would be appreciated. > > root at snot:bob# lspci > 00:00.0 Host bridge: Acer Laboratories Inc. M1541 (rev 04) > 00:01.0 PCI bridge: Acer Laboratories Inc. M5243 (rev 04) > 00:02.0 USB Controller: Acer Laboratories Inc. M5237 (rev 03) > 00:07.0 ISA bridge: Acer Laboratories Inc. M1533 (rev c3) > 00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] > (rev 24) > 00:0f.0 IDE interface: Acer Laboratories Inc. M5229 (rev c1) > 01:00.0 VGA compatible controller: S3 Inc.: Unknown device 8a13 (rev 02) > > root at snot:bob# scanpci > > pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x10b9 device 0x1541 > ALI Device unknown > > pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x10b9 device 0x5243 > ALI Device unknown > > pci bus 0x0000 cardnum 0x02 function 0x00: vendor 0x10b9 device 0x5237 > ALI Device unknown > > pci bus 0x0000 cardnum 0x07 function 0x00: vendor 0x10b9 device 0x1533 > ALI M1533 Aladdin IV > > pci bus 0x0000 cardnum 0x09 function 0x00: vendor 0x10b7 device 0x9055 > 3COM Device unknown > > pci bus 0x0000 cardnum 0x0f function 0x00: vendor 0x10b9 device 0x5229 > ALI M5229 TXpro > > pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x5333 device 0x8a13
