Hi I've been trying to get the motherboard sensors to work on my gigabyte GA-5AA (Alladin V chipset) board, I know they are there 'cos my fan has 3 wires, and a few years back I got some motherboard voltages in window$. It seems that i2c bus should be supported by the ali15x3 driver (agpgart and the IDE driver both report ALI15x3) but it won't find it. I am running kernel 2.5.53 with the 2.5.53-i2c-1-patch & 2.5.53-i2c-5-patch linked from your website. The patches don't apply cleanly to virgin kernel source, I had to merge bits in by hand. Any suggestions where to start hacking would be appreciated. root at snot:bob# lspci 00:00.0 Host bridge: Acer Laboratories Inc. M1541 (rev 04) 00:01.0 PCI bridge: Acer Laboratories Inc. M5243 (rev 04) 00:02.0 USB Controller: Acer Laboratories Inc. M5237 (rev 03) 00:07.0 ISA bridge: Acer Laboratories Inc. M1533 (rev c3) 00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 24) 00:0f.0 IDE interface: Acer Laboratories Inc. M5229 (rev c1) 01:00.0 VGA compatible controller: S3 Inc.: Unknown device 8a13 (rev 02) root at snot:bob# scanpci pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x10b9 device 0x1541 ALI Device unknown pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x10b9 device 0x5243 ALI Device unknown pci bus 0x0000 cardnum 0x02 function 0x00: vendor 0x10b9 device 0x5237 ALI Device unknown pci bus 0x0000 cardnum 0x07 function 0x00: vendor 0x10b9 device 0x1533 ALI M1533 Aladdin IV pci bus 0x0000 cardnum 0x09 function 0x00: vendor 0x10b7 device 0x9055 3COM Device unknown pci bus 0x0000 cardnum 0x0f function 0x00: vendor 0x10b9 device 0x5229 ALI M5229 TXpro pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x5333 device 0x8a13 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20030227/34b0784a/attachment.bin
