Hello
Below are the result of running lm_sensors on a Tyan Tiger S2466N MPX
motherboard with a chip marked Winbond W83627HF-AW.
The cpu temperatures are way out of line, and the -5V reading looks
suspicious. There are two cpus installed but the kernel is not SMP, and
one cpu heatsink is significantly cooler to the touch than the other.
lm_sensors is compiled from source code obtained by anonymous cvs on the
7. of October 2002. The CVS ID of kernel/chips/w83781d.c is 1.95
I am more than happy to test any patches that you will want to have tested
on this particular motherboard.
w83627hf-i2c-0-2c
Adapter: SMBus AMD768 adapter at 80e0
Algorithm: Non-I2C SMBus adapter
VCore 1: +1.71 V (min = +4.08 V, max = +4.08 V)
VCore 2: +1.72 V (min = +4.08 V, max = +4.08 V)
+3.3V: +3.26 V (min = +2.97 V, max = +3.63 V)
+5V: +5.02 V (min = +4.50 V, max = +5.48 V)
+12V: +9.46 V (min = +10.79 V, max = +13.11 V)
-12V: -12.03 V (min = -13.21 V, max = -10.90 V)
-5V: +0.27 V (min = -5.51 V, max = -4.51 V)
V5SB: +5.44 V (min = +4.50 V, max = +5.48 V)
VBat: +3.24 V (min = +2.70 V, max = +3.29 V)
fan1: 2109 RPM (min = 93 RPM, div = 64)
fan2: 2343 RPM (min = 93 RPM, div = 64)
fan3: 0 RPM (min = 93 RPM, div = 64)
temp1: +77?C (limit = +60?C) sensor =
thermistor ALARM
temp2: +76.0?C (limit = +60?C, hysteresis = +50?C) sensor =
thermistor ALARM
temp3: +74.5?C (limit = +60?C, hysteresis = +50?C) sensor =
thermistor ALARM
vid: +18.500 V
alarms: Chassis intrusion detection ALARM
beep_enable:
Sound alarm disabled
--
----------------------- http://www.elof.dk ----------------------
Kristian Elof Soerensen elof at elof.dk (+45) 45 93 92 02
