I recently replaced the CPU from a Pentium II 300 Mhz to a Pentium III 600
Mhz on the motherboard. I also switched NIC (3com to Intel), but I didn't
think this affected lm_sensors.
The problem is that I lost the voltage values in lm_sensors from minor
hardware upgrade. I can see the values in BIOS and with Windows programs
(e.g., Motherboard Monitor [new version]). I reread the ticket and
doc/chips/gl518sm documentation, and tried set iterate, but it was already
set. I am still using the same versions (never upgraded) of i2c and
lm_sensors: lm_sensors-2.5.5-3 lm_sensors-devel-2.5.5-3
Kernel is v2.4.9-34: Linux ANTux-P3 2.4.9-34 #1 Sat Jun 1 06:25:16 EDT
2002 i686 unknown ... I upgraded from RedHat's up2date program.
[ant at ANTux-P3 ant]$ sensors -f
gl518sm-i2c-0-2d
Adapter: SMBus PIIX4 adapter at 5000
Algorithm: Non-I2C SMBus adapter
+5V: +0.00 V (min = +4.50 V, max = +5.49 V)
+3.3V: +0.00 V (min = +2.96 V, max = +3.62 V)
+12V: +0.00 V (min = +10.81 V, max = +13.12 V)
Vcore: +1.52 V (min = +2.33 V, max = +2.85 V) ALARM
fan1: 9230 RPM (min = 3000 RPM, div = 2)
fan2: 9795 RPM (min = 3000 RPM, div = 2)
temp: +104.0F (limit = +140F, hysteresis = +122F)
beep_enable:
Sound alarm disabled
eeprom-i2c-0-50
Adapter: SMBus PIIX4 adapter at 5000
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
SDRAM Size (MB): 128
eeprom-i2c-0-51
Adapter: SMBus PIIX4 adapter at 5000
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
SDRAM Size (MB): 128
eeprom-i2c-0-52
Adapter: SMBus PIIX4 adapter at 5000
Algorithm: Non-I2C SMBus adapter
Memory type: SDRAM DIMM SPD
SDRAM Size (MB): 128
Thank you in advance.
--
"...[Let us inquire] what glory there was in an omnipotent being
torturing forever a puny little creature who could in no way defend
himself? Would it be to the glory of a man to fry ants?" --Charlotte
Perkins Gilman
--
/\___/\ Phillip Pi (Ant)
/ /\ /\ \ E-Mail: philpi at earthlink.net or philpi at apu.edu
| |o o| |
\ _ / The Ant Farm: http://antfarm.ma.cx
( ) ICQ UIN: 2223658
