be sure that libsensors is installed by make install, that will fix VID and Core limit problems. Try changing sensor type to fix temps. See doc/chips/w83781d and sensors.conf for details. mds Kristian Soerensen wrote: > > Hello > > Below are the result of running lm_sensors on a Tyan Tiger S2466N MPX > motherboard with a chip marked Winbond W83627HF-AW. > > The cpu temperatures are way out of line, and the -5V reading looks > suspicious. There are two cpus installed but the kernel is not SMP, and > one cpu heatsink is significantly cooler to the touch than the other. > > lm_sensors is compiled from source code obtained by anonymous cvs on the > 7. of October 2002. The CVS ID of kernel/chips/w83781d.c is 1.95 > > I am more than happy to test any patches that you will want to have tested > on this particular motherboard. > > w83627hf-i2c-0-2c > Adapter: SMBus AMD768 adapter at 80e0 > Algorithm: Non-I2C SMBus adapter > VCore 1: +1.71 V (min = +4.08 V, max = +4.08 V) > VCore 2: +1.72 V (min = +4.08 V, max = +4.08 V) > +3.3V: +3.26 V (min = +2.97 V, max = +3.63 V) > +5V: +5.02 V (min = +4.50 V, max = +5.48 V) > +12V: +9.46 V (min = +10.79 V, max = +13.11 V) > -12V: -12.03 V (min = -13.21 V, max = -10.90 V) > -5V: +0.27 V (min = -5.51 V, max = -4.51 V) > V5SB: +5.44 V (min = +4.50 V, max = +5.48 V) > VBat: +3.24 V (min = +2.70 V, max = +3.29 V) > fan1: 2109 RPM (min = 93 RPM, div = 64) > fan2: 2343 RPM (min = 93 RPM, div = 64) > fan3: 0 RPM (min = 93 RPM, div = 64) > temp1: +77?C (limit = +60?C) sensor = > thermistor ALARM > temp2: +76.0?C (limit = +60?C, hysteresis = +50?C) sensor = > thermistor ALARM > temp3: +74.5?C (limit = +60?C, hysteresis = +50?C) sensor = > thermistor ALARM > vid: +18.500 V > alarms: Chassis intrusion detection ALARM > beep_enable: > Sound alarm disabled > > -- > ----------------------- http://www.elof.dk ---------------------- > Kristian Elof Soerensen elof at elof.dk (+45) 45 93 92 02
