let us know how the 697hf support is working. 'sensors' (not 'sensors -u') should work if you are using CVS version and updated /etc/sensors.conf. mds Tim Krieglstein wrote: > > Hi > > I just wanted to give you some feedback: > > I've got an Epox 8KHA+ (Via KT266) with an winbond W83697HF. > After tampering around with your latest tarball i found > no support for that chipset. So i wrote a short c programm attached > to the mail. Then after thinking about integrating these findings > into the module, i stumbled over the fact that the chip is supported > in cvs. After fiddling around with the FAQ i finally got the module > working. I confused i2c-isa and i2c-viapro (wich seems to work also) > an it took me twice as long to get the module running than writing > the small c programm... > (The sensors-detect detects the chip correct but doesn't know that > it is already supported!) > > I 'll probably trim the values according to the bios > values. If you are interested on these values or if you want me to > test something just drop me a line. > > Thank you > > Cheers > Tim > -- > It's a damn poor mind that can only think of one way to spell a word. - Andrew Jackson > > > Name: sensor.c > sensor.c Type: text/x-csrc > Description: sensor.c > > Name: sensors.out > sensors.out Type: Plain Text (text/plain) > Description: output of c programm > > Name: sensorsu > sensorsu Type: Plain Text (text/plain) > Encoding: quoted-printable > Description: sensors -u (output)
