I don't see a bus driver listed. In order to communicate with your chip (a GL518SM, I presume), you need a i2c bus driver which supports your hardware installed. Assuming you have a PIIX4, a good start might be to insmod i2c-piix4. Good luck! Phil On Wed, Feb 05, 2003 at 09:18:15AM +0100, Franssens wrote: > I'm having quit some difficulties with lm-sensors. > Everything, including installing and compiling worked great, > but now it doesn't seem to recognize my gl518sm detectors. > when I modprobe that module, > and then perform a "sensors -s", it says; no sensors found!. > But it really IS listed on your supported hardware page. > > some help: > motherboard: FullYes (82440lx), pentiumII 300HMz, 96MB RAM. > > lsmod: > Module Size Used by > gl518sm 8096 0 (unused) > i2c-proc 6064 0 [gl518sm] > i2c-dev 3712 0 > i2c-core 13328 0 [gl518sm i2c-proc i2c-dev] > > the problem was, that sensordetect did not detect that gl518sm, > but a piix4 an an eeprom. > The only output sensors would give me then, was some info from eeprom, > NOT voltages or fans etc. > then I manually tried to modprobe gl518sm, with success. (as you can see) > but unfortunately; > sensors -s now says: no sensors found! > > can you help me? > > thnx! > Anne -- Philip Edelbrock -- IS Manager -- Edge Design, Corvallis, OR phil at netroedge.com -- http://www.netroedge.com/~phil PGP F16: 01 D2 FD 01 B5 46 F4 F0 3A 8B 9D 7E 14 7F FB 7A
