lm_sensors support worte:
> You?ve verified it?s a 627HF (by looking at the board) but the driver
> recognizes a 782d?
Sorry, I've not yet had a chance to check the motherboard, as I'm not
physically near it, but I'll have someone check as soon as I can and let
you know. FWIW, the manual for the board (Tyan S2460) is somewhat
contradictory--on the motherboard block diagram it shows a 627HF but in
the hardware specifications it lists a 782D.
> Please send us the output of prog/dump/i2cdump 0 0x2d.
OK, I had been using lm_sensors 2.6.2 with kernel 2.4.16, i.e. i2c 2.6.1.
So I thought I'd try i2c 2.6.2 to see if it made a difference, but no
luck. The following is with kernel 2.4.16, i2c 2.6.2, and lm_sensors
2.6.2:
[root at redstart dump]# ./i2cdump 0 0x2d
Warning: no size specified (using byte-data access)
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0, address 0x2d, mode byte
You have five seconds to reconsider and press CTRL-C!
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
20: 6d 86 60 b4 4d 9b cf 3c ff ff ff 79 6d 79 6d d8
30: c4 c3 b0 d9 b2 15 31 31 3b 00 00 04 00 00 00 00
40: 01 01 00 00 00 00 00 54 2d 02 01 44 01 15 00 a3
50: ff ff 00 ff ff ff 00 80 30 00 ff ff 11 0e ff ff
60: 6f 86 60 b4 4d 9b d0 3c ff ff ff 79 6d 79 6d d8
70: c4 c3 b0 d9 b2 15 31 31 3b 00 00 04 00 00 00 00
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: 6d 86 60 b4 4d 9b d0 3c ff ff ff 79 6d 79 6d d8
b0: c4 c3 b0 d9 b2 15 31 31 3b 00 00 04 00 00 00 00
c0: 01 00 00 00 00 00 00 54 2d 02 01 44 01 15 00 a3
d0: ff ff 80 ff ff ff 00 80 30 00 ff ff 11 0e ff ff
e0: 6d 86 60 b4 4d 9b d0 3c ff ff ff 79 6d 79 6d d8
f0: c4 c3 b0 d9 b2 15 31 31 3b 00 00 04 00 00 00 00
> You do have two processors?
Yes, this is Tyan's second dual Athlon motherboard.
> Follow up by emailing sensors at stimpy.netroedge.com and reference your
> ticket #.
>
> MDS 12/28/01
Let me know if there is anything else you'd like me to provide..
Thanks,
Wayne
