get lm_sensors-2.6.2 and try 'modprobe w83781d init=0' "Dr. David Alan Gilbert" wrote: > > Hi, > I'd like to report that the lmsensors package 2.6.1-3 (-3 is the > debian package no.) doesn't like my Tyan Tiger S2460 motherboard. It is > a dual Athlon. > > sensors-detect works and detects the 'SMBus AMD7X6 adapter at 80e0' > adapter which shows up in /proc/bus/i2c. > > It detects and tells me to load the w83781d module. Unfortunatly when > this loads it hangs the machine solid (no keyboard, nothing). > > At boot time when it tries to load this it gives the: > > 'W83782D subclient] reg to adapter [SMBus AMD7x6 adapter' at 80e0 > (pos. 2)' > > (Typed from scrawlings in my note book...) I get a message for pos.0 and > pos.1 before this. Then it hangs. > > When sensors-detect runs it detects that device with a confidence of 8; > it also detects (with a confidence of 3 listing as misdetects) LM75's > at 48 and 49 on the SMBus. > > /proc/sys/dev/sensors lists three eeprom's : > > dg at gallifrey:/proc/sys/dev/sensors$ cat chips > 256 eeprom-i2c-0-50 > 257 eeprom-i2c-0-51 > 258 eeprom-i2c-0-54 > > (It gave high confidence in two of those being my two DIMMs - gave lower > confidence in the last one being a dimm; it isn't - I only have 3). > > Thanks in advance for any ideas, > > Dave > ---------------- Have a happy GNU millennium! ---------------------- > / Dr. David Alan Gilbert | Running GNU/Linux on Alpha,68K| Happy \ > \ gro.gilbert @ treblig.org | MIPS,x86,ARM, SPARC and HP-PA | In Hex / > \ _________________________|_____ http://www.treblig.org |_______/
