Hi, I'd like to report that the lmsensors package 2.6.1-3 (-3 is the debian package no.) doesn't like my Tyan Tiger S2460 motherboard. It is a dual Athlon. sensors-detect works and detects the 'SMBus AMD7X6 adapter at 80e0' adapter which shows up in /proc/bus/i2c. It detects and tells me to load the w83781d module. Unfortunatly when this loads it hangs the machine solid (no keyboard, nothing). At boot time when it tries to load this it gives the: 'W83782D subclient] reg to adapter [SMBus AMD7x6 adapter' at 80e0 (pos. 2)' (Typed from scrawlings in my note book...) I get a message for pos.0 and pos.1 before this. Then it hangs. When sensors-detect runs it detects that device with a confidence of 8; it also detects (with a confidence of 3 listing as misdetects) LM75's at 48 and 49 on the SMBus. /proc/sys/dev/sensors lists three eeprom's : dg at gallifrey:/proc/sys/dev/sensors$ cat chips 256 eeprom-i2c-0-50 257 eeprom-i2c-0-51 258 eeprom-i2c-0-54 (It gave high confidence in two of those being my two DIMMs - gave lower confidence in the last one being a dimm; it isn't - I only have 3). Thanks in advance for any ideas, Dave ---------------- Have a happy GNU millennium! ---------------------- / Dr. David Alan Gilbert | Running GNU/Linux on Alpha,68K| Happy \ \ gro.gilbert @ treblig.org | MIPS,x86,ARM, SPARC and HP-PA | In Hex / \ _________________________|_____ http://www.treblig.org |_______/
