On 21/04/15 10:23, "Thomas B. Rücker" wrote:
On 04/20/2015 06:04 PM, Michael C. Cambria wrote:
I'll test e..g ping6 to another BBB and Pi ASAP.
Yeah, still have to test mine too. Started working on wiring another
openlabs module into a Minnowboard Max, but that needs writing a board
file...
I think I'll first just flash one of my CC2530 nodes for some simple tests.
I've tried two things:
- Receiving packets from cc2530 nodes running contiki in monitor mode.
For some reason Wireshark complains about the FCS on some packets.
- Beaglebone White and a BB Black (same image, both DTBs patched)
works just fine, #exactsteps below
Boards run a Debian Jessie image with a 4.0 Linux kernel built using
RCN's tools. From what I can tell it's pretty low on patches, so
~vanilla. DT for both am335x-bone and am335x-boneblack modified to
include a DTSI, similar to what Alex posted e.g. in
<20150414150656.GB2179@omega>. DT for BBB disabled HDMI. wpan-tools from
git.
Board1:
# iwpan dev wpan0 set pan_id 0xcafe
# ip link add link wpan0 name lowpan0 type lowpan
# ip -6 addr add 2001:db8::1/64 dev lowpan0
# ip link set wpan0 up
# ip link set lowpan0 up
Board2:
# iwpan dev wpan0 set pan_id 0xcafe
# ip link add link wpan0 name lowpan0 type lowpan
# ip -6 addr add 2001:db8::2/64 dev lowpan0
# ip link set wpan0 up
# ip link set lowpan0 up
# ping6 2001:db8::1 -c3
PING 2001:db8::1(2001:db8::1) 56 data bytes
64 bytes from 2001:db8::1: icmp_seq=1 ttl=64 time=10.8 ms
64 bytes from 2001:db8::1: icmp_seq=2 ttl=64 time=10.5 ms
64 bytes from 2001:db8::1: icmp_seq=3 ttl=64 time=10.5 ms
--- 2001:db8::1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2003ms
rtt min/avg/max/mdev = 10.526/10.633/10.814/0.175 ms
Tried SSH, works fine too.
If you are concerned with TCP performance you can modify parameters
according to Alex:
#reduce tcp receive buf, will improve tcp connections
echo "127 512 1024" > /proc/sys/net/ipv4/tcp_rmem
echo "127 512 1024" > /proc/sys/net/ipv4/tcp_wmem
Note that this will affect the whole TCP stack. There might be a way to
do it per interface.
Next: try to talk to the Contiki nodes properly
Cheers
Thomas
--
To unsubscribe from this list: send the line "unsubscribe linux-wpan" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
