On Fri, Apr 17, 2015 at 09:28:37AM -0400, Michael C. Cambria wrote: ... > >> > > With those changes the "arguments longer than property" message does go > away. I now get this probe error: > > > [ 9.815400] of_get_named_gpiod_flags: parsed 'reset-gpio' property of > node '/ocp/spi@481a0000/at86rf231@0[0]' - stat) > [ 9.815437] of_get_named_gpiod_flags: parsed 'sleep-gpio' property of > node '/ocp/spi@481a0000/at86rf231@0[0]' - stat) > [ 10.287193] at86rf230 spi1.0: Non-Atmel dev found (MAN_ID 00 00) > [ 10.971416] at86rf230: probe of spi1.0 failed with error -22 > Meanwhile I got private repsonse that somebody have a working openlabs module on a beaglebone, so it's _really_ possible! :-) Your issue now seems that you reading zero's only on the spi bus. Please remember that we can't know your GPIO setup to the beaglebone pinout headers. Maybe your reset pin is always low and then the at86rf233 will not work. You need to know on which GPIO is reset pin/irq pin/sleep etc. - Alex -- To unsubscribe from this list: send the line "unsubscribe linux-wpan" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
