On 04/20/2015 06:04 PM, Michael C. Cambria wrote: > > On 04/17/2015 06:19 PM, Alexander Aring wrote: >> On Fri, Apr 17, 2015 at 09:28:37AM -0400, Michael C. Cambria wrote: >> .... >>> With those changes the "arguments longer than property" message does go >>> away. I now get this probe error: >>> >>> >>> [ 9.815400] of_get_named_gpiod_flags: parsed 'reset-gpio' >>> property of >>> node '/ocp/spi@481a0000/at86rf231@0[0]' - stat) >>> [ 9.815437] of_get_named_gpiod_flags: parsed 'sleep-gpio' >>> property of >>> node '/ocp/spi@481a0000/at86rf231@0[0]' - stat) >>> [ 10.287193] at86rf230 spi1.0: Non-Atmel dev found (MAN_ID 00 00) >>> [ 10.971416] at86rf230: probe of spi1.0 failed with error -22 >>> >> Meanwhile I got private repsonse that somebody have a working openlabs >> module on a beaglebone, so it's _really_ possible! :-) > > Thanks for all the help. My BBB now works with the openlabs radio. I > had P9_28 & P9_30 in the the wrong holes (blush). Funny, that's pretty much the same type mistake that I made, before I got things working. I was the person Alexander referred to earlier. I have it working on a pretty much vanilla 4.0 (a rebuild of RCN's deb package) on the BBB. > I'll test e..g ping6 to another BBB and Pi ASAP. Yeah, still have to test mine too. Started working on wiring another openlabs module into a Minnowboard Max, but that needs writing a board file... I think I'll first just flash one of my CC2530 nodes for some simple tests. Cheers Thomas -- To unsubscribe from this list: send the line "unsubscribe linux-wpan" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
