This series adds initial support for the 18xx chip family. The new module uses wlcore for functionality common with the 12xx family. Arik Nemtsov (28): wl18xx: create per-chip-family private storage wl18xx: set the number of Tx descriptors wl18xx: set normal/GEM Tx spare block counts wl18xx: implement hw op for calculating hw block count per packet wl18xx: implement hw op for setting blocks in hw_tx_desc wl18xx: implement hw op for setting frame length in tx_hw_desc wl18xx: define HW-rate translation elements/tables wl18xx: add fw_status private data wl18xx: set Rx block-size alignment quirk wl18xx: implement hw op for getting rx buffer data alignment wl18xx: implement hw op for getting rx packet data length wl18xx: implement immediate Tx completion wlcore/wl18xx: add hw op for setting Tx HW checksum wlcore/wl18xx: add hw op for Rx HW checksum wlcore: track current channel type per vif wl18xx: send channel type to FW on role start wl18xx: ipmlement ap_rate_mask hw op wlcore: support peer MIMO rates wlcore/wl18xx: enable MIMO/wide-chan rates in AP-mode rate config wl18xx: set HT capabilities wl18xx: add module param for overriding HT caps wl18xx: read FW pc on recovery wl18xx: disable FW log functionality wl18xx: implement hw op to read PG version wl18xx: init Tx-released index to 0 on HW init wl18xx: don't upload NVS to FW wl18xx: change board type enum according to new FW wlcore/wl12xx/18xx: split fw_status struct into two Assaf Azulay (1): wl18xx: change default tcp_checksum to false Luciano Coelho (49): wl18xx: add new module wlcore_sdio/wl18xx: use SDIO revision number to identify wl18xx chips wl18xx: add empty operations struct wl18xx: add partition table wl18xx: add register table wl18xx: add identify chip operation wl18xx: add some boot operations and hw-specific configurations wl18xx: add trigger command and ack event operations wl18xx: add hw_init operation wl18xx: add runtime configuration parameters wl18xx: add board type module argument wl18xx: translate and write the board type to SCR_PAD2 wl18xx: read clock frequency and do top init accordingly wlcore: rename wl12xx.h to wlcore_i.h wlcore/wl12xx: move ref_clock and tcxo_clock elements to wl12xx wlcore/wl12xx: move rx_mem_pool_addr element to wl12xx wlcore/wl12xx: add plt_init op and move the code to wl12xx wl18xx: add plt_init operation wl18xx: change the low_band_component_type for HDK boards wl18xx: add number of antennas and dc2dc type as module params wl18xx: add module parameter to disable TCP checksum wl18xx: derive the MAC address from the BD_ADDR in fuse ROM wl18xx: add a module parameter to control 11a support wlcore: add module parameter to dump SDIO reads and writes wl18xx: copy the default configuration before checking the board_type wl18xx: changed default board_type to HDK wlcore: add space for private area when allocating fw_status wl18xx: change low_band_component_type value for COM8 wlcore: reorder identify_chip and get_hw_info wl18xx: disable MCS_13 for wl18xx PG 1.0 wlcore: update beacon and probe_resp templates when rates change wlcore: use all AP basic rates as default wlcore: abstract debugfs fw_stats to be handled by the lower drivers wlcore: add debugfs macro to help print fw statistics arrays wl12xx: implement fw status debugfs entries wl18xx: implement fw status debugfs entries wlcore: create private static_data area and add operation to parse it wl18xx: print the PHY firmware version from the private static data wlcore: print the interrupt status when recovery is triggered wl18xx: don't use MIMO when ht_mode is set to wide wlcore: use proper values for supported local rates wl18xx: add module parameter to force SISO 20MHz wl18xx: add power limit reference value to mac_and_phy settings wl18xx: export low/high band component values as module params wl18xx: export pwr_limit_reference_11_abg value as a module parameter wlcore/wl12xx/wl18xx: move lower driver debugfs to a subdir wlcore: increase aggregation buffer size by one page wl18xx: increase tx_ba_win_size to 64 wl18xx: use new fw stats structures drivers/net/wireless/ti/Kconfig | 1 + drivers/net/wireless/ti/Makefile | 1 + drivers/net/wireless/ti/wl12xx/Makefile | 2 +- drivers/net/wireless/ti/wl12xx/acx.h | 223 +++++ drivers/net/wireless/ti/wl12xx/cmd.c | 8 +- drivers/net/wireless/ti/wl12xx/debugfs.c | 243 ++++++ drivers/net/wireless/ti/wl12xx/debugfs.h | 28 + drivers/net/wireless/ti/wl12xx/main.c | 164 +++- drivers/net/wireless/ti/wl12xx/wl12xx.h | 8 + drivers/net/wireless/ti/wl18xx/Kconfig | 6 + drivers/net/wireless/ti/wl18xx/Makefile | 3 + drivers/net/wireless/ti/wl18xx/acx.c | 83 ++ drivers/net/wireless/ti/wl18xx/acx.h | 241 ++++++ drivers/net/wireless/ti/wl18xx/conf.h | 53 ++ drivers/net/wireless/ti/wl18xx/debugfs.c | 309 +++++++ drivers/net/wireless/ti/wl18xx/debugfs.h | 28 + drivers/net/wireless/ti/wl18xx/io.c | 60 ++ drivers/net/wireless/ti/wl18xx/io.h | 28 + drivers/net/wireless/ti/wl18xx/main.c | 1282 +++++++++++++++++++++++++++++ drivers/net/wireless/ti/wl18xx/reg.h | 241 ++++++ drivers/net/wireless/ti/wl18xx/tx.c | 126 +++ drivers/net/wireless/ti/wl18xx/tx.h | 42 + drivers/net/wireless/ti/wl18xx/wl18xx.h | 87 ++ drivers/net/wireless/ti/wlcore/acx.c | 8 +- drivers/net/wireless/ti/wlcore/acx.h | 227 +---- drivers/net/wireless/ti/wlcore/boot.c | 53 +- drivers/net/wireless/ti/wlcore/boot.h | 1 + drivers/net/wireless/ti/wlcore/cmd.c | 34 +- drivers/net/wireless/ti/wlcore/cmd.h | 11 +- drivers/net/wireless/ti/wlcore/conf.h | 16 +- drivers/net/wireless/ti/wlcore/debugfs.c | 283 +------ drivers/net/wireless/ti/wlcore/debugfs.h | 87 ++ drivers/net/wireless/ti/wlcore/hw_ops.h | 48 ++ drivers/net/wireless/ti/wlcore/init.c | 3 + drivers/net/wireless/ti/wlcore/main.c | 362 ++++---- drivers/net/wireless/ti/wlcore/rx.c | 11 +- drivers/net/wireless/ti/wlcore/rx.h | 7 +- drivers/net/wireless/ti/wlcore/sdio.c | 35 +- drivers/net/wireless/ti/wlcore/tx.c | 11 +- drivers/net/wireless/ti/wlcore/tx.h | 26 +- drivers/net/wireless/ti/wlcore/wl12xx.h | 507 ------------ drivers/net/wireless/ti/wlcore/wlcore.h | 42 +- drivers/net/wireless/ti/wlcore/wlcore_i.h | 508 ++++++++++++ 43 files changed, 4306 insertions(+), 1241 deletions(-) create mode 100644 drivers/net/wireless/ti/wl12xx/debugfs.c create mode 100644 drivers/net/wireless/ti/wl12xx/debugfs.h create mode 100644 drivers/net/wireless/ti/wl18xx/Kconfig create mode 100644 drivers/net/wireless/ti/wl18xx/Makefile create mode 100644 drivers/net/wireless/ti/wl18xx/acx.c create mode 100644 drivers/net/wireless/ti/wl18xx/acx.h create mode 100644 drivers/net/wireless/ti/wl18xx/conf.h create mode 100644 drivers/net/wireless/ti/wl18xx/debugfs.c create mode 100644 drivers/net/wireless/ti/wl18xx/debugfs.h create mode 100644 drivers/net/wireless/ti/wl18xx/io.c create mode 100644 drivers/net/wireless/ti/wl18xx/io.h create mode 100644 drivers/net/wireless/ti/wl18xx/main.c create mode 100644 drivers/net/wireless/ti/wl18xx/reg.h create mode 100644 drivers/net/wireless/ti/wl18xx/tx.c create mode 100644 drivers/net/wireless/ti/wl18xx/tx.h create mode 100644 drivers/net/wireless/ti/wl18xx/wl18xx.h delete mode 100644 drivers/net/wireless/ti/wlcore/wl12xx.h create mode 100644 drivers/net/wireless/ti/wlcore/wlcore_i.h -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
