From: Luciano Coelho <coelho@xxxxxx>
Add the register table with the appropriate values for wl18xx.
Signed-off-by: Luciano Coelho <coelho@xxxxxx>
Signed-off-by: Arik Nemtsov <arik@xxxxxxxxxx>
---
drivers/net/wireless/ti/wl18xx/main.c | 23 +++++++
drivers/net/wireless/ti/wl18xx/reg.h | 112 +++++++++++++++++++++++++++++++++
2 files changed, 135 insertions(+)
create mode 100644 drivers/net/wireless/ti/wl18xx/reg.h
diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index f3a164a..88fd934 100644
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -25,6 +25,8 @@
#include "../wlcore/wlcore.h"
#include "../wlcore/debug.h"
+#include "reg.h"
+
static struct wlcore_ops wl18xx_ops = {
};
@@ -62,6 +64,26 @@ static const struct wlcore_partition_set wl18xx_ptable[PART_TABLE_LEN] = {
},
};
+static const int wl18xx_rtable[REG_TABLE_LEN] = {
+ [REG_ECPU_CONTROL] = WL18XX_REG_ECPU_CONTROL,
+ [REG_INTERRUPT_NO_CLEAR] = WL18XX_REG_INTERRUPT_NO_CLEAR,
+ [REG_INTERRUPT_ACK] = WL18XX_REG_INTERRUPT_ACK,
+ [REG_COMMAND_MAILBOX_PTR] = WL18XX_REG_COMMAND_MAILBOX_PTR,
+ [REG_EVENT_MAILBOX_PTR] = WL18XX_REG_EVENT_MAILBOX_PTR,
+ [REG_INTERRUPT_TRIG] = WL18XX_REG_INTERRUPT_TRIG_H,
+ [REG_INTERRUPT_MASK] = WL18XX_REG_INTERRUPT_MASK,
+ [REG_PC_ON_RECOVERY] = 0, /* TODO: where is the PC? */
+ [REG_CHIP_ID_B] = WL18XX_REG_CHIP_ID_B,
+ [REG_CMD_MBOX_ADDRESS] = WL18XX_CMD_MBOX_ADDRESS,
+
+ /* data access memory addresses, used with partition translation */
+ [REG_SLV_MEM_DATA] = WL18XX_SLV_MEM_DATA,
+ [REG_SLV_REG_DATA] = WL18XX_SLV_REG_DATA,
+
+ /* raw data access memory addresses */
+ [REG_RAW_FW_STATUS_ADDR] = WL18XX_FW_STATUS_ADDR,
+};
+
int __devinit wl18xx_probe(struct platform_device *pdev)
{
struct wl1271 *wl;
@@ -76,6 +98,7 @@ int __devinit wl18xx_probe(struct platform_device *pdev)
wl = hw->priv;
wl->ops = &wl18xx_ops;
wl->ptable = wl18xx_ptable;
+ wl->rtable = wl18xx_rtable;
return wlcore_probe(wl, pdev);
}
diff --git a/drivers/net/wireless/ti/wl18xx/reg.h b/drivers/net/wireless/ti/wl18xx/reg.h
new file mode 100644
index 0000000..9af0c83
--- /dev/null
+++ b/drivers/net/wireless/ti/wl18xx/reg.h
@@ -0,0 +1,112 @@
+/*
+ * This file is part of wlcore
+ *
+ * Copyright (C) 2011 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __REG_H__
+#define __REG_H__
+
+#define WL18XX_REGISTERS_BASE 0x00800000
+#define WL18XX_CODE_BASE 0x00000000
+#define WL18XX_DATA_BASE 0x00400000
+#define WL18XX_DOUBLE_BUFFER_BASE 0x00600000
+#define WL18XX_MCU_KEY_SEARCH_BASE 0x00700000
+#define WL18XX_PHY_BASE 0x00900000
+#define WL18XX_TOP_OCP_BASE 0x00A00000
+#define WL18XX_PACKET_RAM_BASE 0x00B00000
+#define WL18XX_HOST_BASE 0x00C00000
+
+#define WL18XX_REGISTERS_DOWN_SIZE 0x0000B000
+
+#define WL18XX_REG_BOOT_PART_START 0x00802000
+#define WL18XX_REG_BOOT_PART_SIZE 0x00014578
+
+#define WL18XX_PHY_INIT_MEM_ADDR 0x80926000
+
+#define WL18XX_SDIO_WSPI_BASE (WL18XX_REGISTERS_BASE)
+#define WL18XX_REG_CONFIG_BASE (WL18XX_REGISTERS_BASE + 0x02000)
+#define WL18XX_WGCM_REGS_BASE (WL18XX_REGISTERS_BASE + 0x03000)
+#define WL18XX_ENC_BASE (WL18XX_REGISTERS_BASE + 0x04000)
+#define WL18XX_INTERRUPT_BASE (WL18XX_REGISTERS_BASE + 0x05000)
+#define WL18XX_UART_BASE (WL18XX_REGISTERS_BASE + 0x06000)
+#define WL18XX_WELP_BASE (WL18XX_REGISTERS_BASE + 0x07000)
+#define WL18XX_TCP_CKSM_BASE (WL18XX_REGISTERS_BASE + 0x08000)
+#define WL18XX_FIFO_BASE (WL18XX_REGISTERS_BASE + 0x09000)
+#define WL18XX_OCP_BRIDGE_BASE (WL18XX_REGISTERS_BASE + 0x0A000)
+#define WL18XX_PMAC_RX_BASE (WL18XX_REGISTERS_BASE + 0x14800)
+#define WL18XX_PMAC_ACM_BASE (WL18XX_REGISTERS_BASE + 0x14C00)
+#define WL18XX_PMAC_TX_BASE (WL18XX_REGISTERS_BASE + 0x15000)
+#define WL18XX_PMAC_CSR_BASE (WL18XX_REGISTERS_BASE + 0x15400)
+
+#define WL18XX_REG_ECPU_CONTROL (WL18XX_REGISTERS_BASE + 0x02004)
+#define WL18XX_REG_INTERRUPT_NO_CLEAR (WL18XX_REGISTERS_BASE + 0x050E8)
+#define WL18XX_REG_INTERRUPT_ACK (WL18XX_REGISTERS_BASE + 0x050F0)
+#define WL18XX_REG_INTERRUPT_TRIG (WL18XX_REGISTERS_BASE + 0x5074)
+#define WL18XX_REG_INTERRUPT_TRIG_H (WL18XX_REGISTERS_BASE + 0x5078)
+#define WL18XX_REG_INTERRUPT_MASK (WL18XX_REGISTERS_BASE + 0x0050DC)
+
+#define WL18XX_REG_CHIP_ID_B (WL18XX_REGISTERS_BASE + 0x01542C)
+
+#define WL18XX_SLV_MEM_DATA (WL18XX_HOST_BASE + 0x0018)
+#define WL18XX_SLV_REG_DATA (WL18XX_HOST_BASE + 0x0008)
+
+/* Scratch Pad registers*/
+#define WL18XX_SCR_PAD0 (WL18XX_REGISTERS_BASE + 0x0154EC)
+#define WL18XX_SCR_PAD1 (WL18XX_REGISTERS_BASE + 0x0154F0)
+#define WL18XX_SCR_PAD2 (WL18XX_REGISTERS_BASE + 0x0154F4)
+#define WL18XX_SCR_PAD3 (WL18XX_REGISTERS_BASE + 0x0154F8)
+#define WL18XX_SCR_PAD4 (WL18XX_REGISTERS_BASE + 0x0154FC)
+#define WL18XX_SCR_PAD4_SET (WL18XX_REGISTERS_BASE + 0x015504)
+#define WL18XX_SCR_PAD4_CLR (WL18XX_REGISTERS_BASE + 0x015500)
+#define WL18XX_SCR_PAD5 (WL18XX_REGISTERS_BASE + 0x015508)
+#define WL18XX_SCR_PAD5_SET (WL18XX_REGISTERS_BASE + 0x015510)
+#define WL18XX_SCR_PAD5_CLR (WL18XX_REGISTERS_BASE + 0x01550C)
+#define WL18XX_SCR_PAD6 (WL18XX_REGISTERS_BASE + 0x015514)
+#define WL18XX_SCR_PAD7 (WL18XX_REGISTERS_BASE + 0x015518)
+#define WL18XX_SCR_PAD8 (WL18XX_REGISTERS_BASE + 0x01551C)
+#define WL18XX_SCR_PAD9 (WL18XX_REGISTERS_BASE + 0x015520)
+
+/* Spare registers*/
+#define WL18XX_SPARE_A1 (WL18XX_REGISTERS_BASE + 0x002194)
+#define WL18XX_SPARE_A2 (WL18XX_REGISTERS_BASE + 0x002198)
+#define WL18XX_SPARE_A3 (WL18XX_REGISTERS_BASE + 0x00219C)
+#define WL18XX_SPARE_A4 (WL18XX_REGISTERS_BASE + 0x0021A0)
+#define WL18XX_SPARE_A5 (WL18XX_REGISTERS_BASE + 0x0021A4)
+#define WL18XX_SPARE_A6 (WL18XX_REGISTERS_BASE + 0x0021A8)
+#define WL18XX_SPARE_A7 (WL18XX_REGISTERS_BASE + 0x0021AC)
+#define WL18XX_SPARE_A8 (WL18XX_REGISTERS_BASE + 0x0021B0)
+#define WL18XX_SPARE_B1 (WL18XX_REGISTERS_BASE + 0x015524)
+#define WL18XX_SPARE_B2 (WL18XX_REGISTERS_BASE + 0x015528)
+#define WL18XX_SPARE_B3 (WL18XX_REGISTERS_BASE + 0x01552C)
+#define WL18XX_SPARE_B4 (WL18XX_REGISTERS_BASE + 0x015530)
+#define WL18XX_SPARE_B5 (WL18XX_REGISTERS_BASE + 0x015534)
+#define WL18XX_SPARE_B6 (WL18XX_REGISTERS_BASE + 0x015538)
+#define WL18XX_SPARE_B7 (WL18XX_REGISTERS_BASE + 0x01553C)
+#define WL18XX_SPARE_B8 (WL18XX_REGISTERS_BASE + 0x015540)
+
+#define WL18XX_REG_COMMAND_MAILBOX_PTR (WL18XX_SCR_PAD0)
+#define WL18XX_REG_EVENT_MAILBOX_PTR (WL18XX_SCR_PAD1)
+
+#define WL18XX_CMD_MBOX_ADDRESS 0xB007B4
+
+#define WL18XX_FW_STATUS_ADDR 0x50F8
+
+#define CHIP_ID_185x_PG10 (0x06030101)
+
+#endif /* __REG_H__ */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
