Helmut Schaa wrote: > On Sun, May 6, 2012 at 5:38 PM, Tobias Diedrich > > Before reverting this "iw phy phy0 info" would show "0.0 dBm" as > > maximum transmit power for all frequencies. > > > > After reverting this (and with regdomain set to CH) it is back to > > the expected 20 dBm. > > Ok, the problem seems to come from the fact that rt2800 doesn't > register a per channel > max power to mac80211. BTW I have a secondary issue that I've today bisected down to some change between compat-wireless-2012-04-11 and compat-wireless-2012-04-12, but I still need to narrow it down further and verify it. Even with the max_power issue fixed associating with an rt28xx AP running compat-wireless-2012-04-12 or higher doesn't work (IIRC AP claims wpa auth succeeded, but STA claims it timed out). STA mode worked fine though (But only tested it once on Sunday). -- Tobias PGP: http://8ef7ddba.uguu.de -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html