Dear all, M Finger gave me this email adress for support. Below my little problem. Thanks in advance for help. Best regards. c.martin > Message du 13/04/12 16:39 > De : "Larry Finger" > A : "Cédric MARTIN" > Copie à : > Objet : Re: info about D-link USB wlan with realtek RTL8192SU > > On 04/11/2012 07:07 AM, Cédric MARTIN wrote: > > M Finger, > > > > > > I'm sorry ton contact you, because I think you have hundred of email like this, > > but I think you're the right person to give me some advices. > > I'm beginner in Gnu/linux world as User. > > > > I use a PC with openelec distri (home theater distribution, *OpenELEC 1.0 > > (stable)* - 1.0.2 > > Intel x86_64 > > (90 MB)) and I have problem with my wlan. > > I have aleatory connection. > > > > a lsusb give me this: > > > > "... > > Bus 002 Device 006: ID 07d1:3303 D-Link System DWA-131 802.11n Wireless N Nano > > Adapter(rev.A1) [Realtek RTL8192SU]" > > > > It seem ok. > > > > a lsmod give me this: > > > > " > > root ~ # lsmod > > Module Size Used by > > snd_hda_codec_hdmi 22001 1 > > snd_hda_codec_realtek 274159 1 > > snd_hda_intel 21531 3 > > snd_hda_codec 73098 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel > > snd_hwdep 5108 1 snd_hda_codec > > snd_pcm 59142 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec > > snd_timer 17314 2 snd_pcm > > snd 44263 11 > > snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer > > ftdi_sio 32206 1 > > r8712u 156717 0 > > snd_page_alloc 6753 2 snd_hda_intel,snd_pcm > > usbserial 28127 3 ftdi_sio > > coretemp 5979 0 > > " > > a dmesg give me this: > > > > " > > ...[ 5.745226] r8712u: module is from the staging directory, the quality is > > unknown, you have been warned. > > [ 5.745750] r8712u: DriverVersion: v7_0.20100831 > > [ 5.745761] r8712u: register rtl8712_netdev_ops to netdev_ops > > [ 5.745763] r8712u: USB_SPEED_HIGH with 4 endpoints > > [ 5.746286] r8712u: Boot from EFUSE: Autoload OK > > [ 5.746449] USB Serial support registered for FTDI USB Serial Device > > [ 5.746490] ftdi_sio 2-1.4.1:1.0: FTDI USB Serial Device converter detected > > [ 5.746532] usb 2-1.4.1: Detected FT232RL > > [ 5.746535] usb 2-1.4.1: Number of endpoints 2 > > [ 5.746536] usb 2-1.4.1: Endpoint 1 MaxPacketSize 64 > > [ 5.746538] usb 2-1.4.1: Endpoint 2 MaxPacketSize 64 > > [ 5.746539] usb 2-1.4.1: Setting MaxPacketSize 64 > > [ 5.747002] usb 2-1.4.1: FTDI USB Serial Device converter now attached to ttyUSB0 > > [ 5.747021] usbcore: registered new interface driver ftdi_sio > > [ 5.747023] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver > > [ 6.104736] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > > [ 6.104787] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X > > [ 6.104831] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 > > [ 6.327161] r8712u: CustomerID = 0x0000 > > [ 6.327164] r8712u: MAC Address from efuse = fc:75:16:6d:f3:b1 > > [ 6.327420] usbcore: registered new interface driver r8712u > > ... > > [ 22.465242] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" > > [ 23.150858] r8712u: 1 RCR=0x153f00e > > [ 23.151818] r8712u: 2 RCR=0x553f00e > > [ 23.260743] ADDRCONF(NETDEV_UP): wlan0: link is not ready > > " > > I also try the *OpenELEC 2.0 (Beta 1)* - 1.95.1 > > Intel x86_64 > > (94 MB) release (with the 3.2.14 kernel) and my wlan still don't work > > I only do private consulting when I have a contract. > > If you want free help from kernel developers, it is essential that you Cc the > appropriate mailing list for that driver. In this case, that is > linux-wireless@xxxxxxxxxxxxxxx. > > Larry > > -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html