Hi,
0xff1b indicates the device wasn't correctly setup post power on.
So I'd try to find out exactly why that is.
Adrian
On 13 April 2012 08:32, Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx> wrote:
> This device works fine of ath5k.
>
> Details bellow
> 05:00.0 0200: 168c:ff1b (rev 01)
> 05:00.0 Ethernet controller: Atheros Communications Inc. Device ff1b (rev 01)
> Flags: bus master, fast devsel, latency 0, IRQ 19
> Memory at febf0000 (64-bit, non-prefetchable) [size=64K]
> Capabilities: <access denied>
> Kernel driver in use: ath5k
>
> ath5k 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> ath5k 0000:05:00.0: setting latency timer to 64
> ath5k 0000:05:00.0: registered as 'phy0'
> ath: EEPROM regdomain: 0x67
> ath: EEPROM indicates we should expect a direct regpair map
> ath: Country alpha2 being used: 00
> ath: Regpair used: 0x67
> ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
> ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
>
> Signed-off-by: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>
>
> diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c
> index eaf79b4..1be418c 100644
> --- a/drivers/net/wireless/ath/ath5k/pci.c
> +++ b/drivers/net/wireless/ath/ath5k/pci.c
> @@ -44,6 +44,7 @@ static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = {
> { PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */
> { PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */
> { PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */
> + { PCI_VDEVICE(ATHEROS, 0xff1b) }, /* AR5BXB63 */
> { 0 }
> };
> MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
>
> --
> Yoshinori Sato
> <ysato@xxxxxxxxxxxxxxxxxxxx>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
