On 12/10/2011 07:55 PM, Rafał Miłecki wrote:
Signed-off-by: Rafał Miłecki<zajec5@xxxxxxxxx>
---
drivers/net/wireless/b43/phy_n.c | 90 +++++++++++++++++++++++++++++++++++++-
1 files changed, 88 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 114c413..6e776d0 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -4023,6 +4023,58 @@ int b43_phy_initn(struct b43_wldev *dev)
return 0;
}
+static void b43_nphy_pmu_spur_avoid(struct b43_wldev *dev, bool avoid)
+{
+ struct bcma_drv_cc *cc =&dev->dev->bdev->bus->drv_cc;
+ u32 pmu_ctl;
+ if (dev->dev->chip_id == 43224 || dev->dev->chip_id == 43225) {
+ if (avoid) {
+ bcma_chipco_pll_write(cc, 0x0, 0x11500010);
+ bcma_chipco_pll_write(cc, 0x1, 0x000C0C06);
+ bcma_chipco_pll_write(cc, 0x2, 0x0F600a08);
+ bcma_chipco_pll_write(cc, 0x3, 0x00000000);
+ bcma_chipco_pll_write(cc, 0x4, 0x2001E920);
+ bcma_chipco_pll_write(cc, 0x5, 0x88888815);
+ } else {
+ bcma_chipco_pll_write(cc, 0x0, 0x11100010);
+ bcma_chipco_pll_write(cc, 0x1, 0x000c0c06);
+ bcma_chipco_pll_write(cc, 0x2, 0x03000a08);
+ bcma_chipco_pll_write(cc, 0x3, 0x00000000);
+ bcma_chipco_pll_write(cc, 0x4, 0x200005c0);
+ bcma_chipco_pll_write(cc, 0x5, 0x88888815);
+ }
+ pmu_ctl = BCMA_CC_PMU_CTL_PLL_UPD;
+ } else if (dev->dev->chip_id == 0x4716) {
+ if (avoid) {
+ bcma_chipco_pll_write(cc, 0x0, 0x11500060);
+ bcma_chipco_pll_write(cc, 0x1, 0x080C0C06);
+ bcma_chipco_pll_write(cc, 0x2, 0x0F600000);
+ bcma_chipco_pll_write(cc, 0x3, 0x00000000);
+ bcma_chipco_pll_write(cc, 0x4, 0x2001E924);
+ bcma_chipco_pll_write(cc, 0x5, 0x88888815);
+ } else {
+ bcma_chipco_pll_write(cc, 0x0, 0x11100060);
+ bcma_chipco_pll_write(cc, 0x1, 0x080c0c06);
+ bcma_chipco_pll_write(cc, 0x2, 0x03000000);
+ bcma_chipco_pll_write(cc, 0x3, 0x00000000);
+ bcma_chipco_pll_write(cc, 0x4, 0x200005c0);
+ bcma_chipco_pll_write(cc, 0x5, 0x88888815);
+ }
+ pmu_ctl = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW;
+ } else if (dev->dev->chip_id == 0x4322 || dev->dev->chip_id == 0x4340 ||
+ dev->dev->chip_id == 0x4341) {
+ bcma_chipco_pll_write(cc, 0x0, 0x11100070);
+ bcma_chipco_pll_write(cc, 0x1, 0x1014140a);
+ bcma_chipco_pll_write(cc, 0x5, 0x88888854);
+ if (avoid)
+ bcma_chipco_pll_write(cc, 0x2, 0x05201828);
+ else
+ bcma_chipco_pll_write(cc, 0x2, 0x05001828);
+ pmu_ctl = BCMA_CC_PMU_CTL_PLL_UPD;
+ }
+ bcma_cc_set32(cc, BCMA_CC_PMU_CTL, pmu_ctl);
My gcc is brain dead here and outputs
CC [M] drivers/net/wireless/b43/phy_n.o
drivers/net/wireless/b43/phy_n.c: In function ‘b43_nphy_channel_setup.isra.14’:
drivers/net/wireless/b43/phy_n.c:4075:2: warning: ‘pmu_ctl’ may be used
uninitialized in this function [-Wuninitialized]
drivers/net/wireless/b43/phy_n.c:4029:6: note: ‘pmu_ctl’ was declared here
The variable is clearly set in all paths, but I still get the warning.
Larry
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
