Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx> --- drivers/net/wireless/b43/phy_n.c | 90 +++++++++++++++++++++++++++++++++++++- 1 files changed, 88 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index 114c413..6e776d0 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -4023,6 +4023,58 @@ int b43_phy_initn(struct b43_wldev *dev) return 0; } +static void b43_nphy_pmu_spur_avoid(struct b43_wldev *dev, bool avoid) +{ + struct bcma_drv_cc *cc = &dev->dev->bdev->bus->drv_cc; + u32 pmu_ctl; + if (dev->dev->chip_id == 43224 || dev->dev->chip_id == 43225) { + if (avoid) { + bcma_chipco_pll_write(cc, 0x0, 0x11500010); + bcma_chipco_pll_write(cc, 0x1, 0x000C0C06); + bcma_chipco_pll_write(cc, 0x2, 0x0F600a08); + bcma_chipco_pll_write(cc, 0x3, 0x00000000); + bcma_chipco_pll_write(cc, 0x4, 0x2001E920); + bcma_chipco_pll_write(cc, 0x5, 0x88888815); + } else { + bcma_chipco_pll_write(cc, 0x0, 0x11100010); + bcma_chipco_pll_write(cc, 0x1, 0x000c0c06); + bcma_chipco_pll_write(cc, 0x2, 0x03000a08); + bcma_chipco_pll_write(cc, 0x3, 0x00000000); + bcma_chipco_pll_write(cc, 0x4, 0x200005c0); + bcma_chipco_pll_write(cc, 0x5, 0x88888815); + } + pmu_ctl = BCMA_CC_PMU_CTL_PLL_UPD; + } else if (dev->dev->chip_id == 0x4716) { + if (avoid) { + bcma_chipco_pll_write(cc, 0x0, 0x11500060); + bcma_chipco_pll_write(cc, 0x1, 0x080C0C06); + bcma_chipco_pll_write(cc, 0x2, 0x0F600000); + bcma_chipco_pll_write(cc, 0x3, 0x00000000); + bcma_chipco_pll_write(cc, 0x4, 0x2001E924); + bcma_chipco_pll_write(cc, 0x5, 0x88888815); + } else { + bcma_chipco_pll_write(cc, 0x0, 0x11100060); + bcma_chipco_pll_write(cc, 0x1, 0x080c0c06); + bcma_chipco_pll_write(cc, 0x2, 0x03000000); + bcma_chipco_pll_write(cc, 0x3, 0x00000000); + bcma_chipco_pll_write(cc, 0x4, 0x200005c0); + bcma_chipco_pll_write(cc, 0x5, 0x88888815); + } + pmu_ctl = BCMA_CC_PMU_CTL_PLL_UPD | BCMA_CC_PMU_CTL_NOILPONW; + } else if (dev->dev->chip_id == 0x4322 || dev->dev->chip_id == 0x4340 || + dev->dev->chip_id == 0x4341) { + bcma_chipco_pll_write(cc, 0x0, 0x11100070); + bcma_chipco_pll_write(cc, 0x1, 0x1014140a); + bcma_chipco_pll_write(cc, 0x5, 0x88888854); + if (avoid) + bcma_chipco_pll_write(cc, 0x2, 0x05201828); + else + bcma_chipco_pll_write(cc, 0x2, 0x05001828); + pmu_ctl = BCMA_CC_PMU_CTL_PLL_UPD; + } + bcma_cc_set32(cc, BCMA_CC_PMU_CTL, pmu_ctl); +} + /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/ChanspecSetup */ static void b43_nphy_channel_setup(struct b43_wldev *dev, const struct b43_phy_n_sfo_cfg *e, @@ -4030,6 +4082,7 @@ static void b43_nphy_channel_setup(struct b43_wldev *dev, { struct b43_phy *phy = &dev->phy; struct b43_phy_n *nphy = dev->phy.n; + int ch = new_channel->hw_value; u16 old_band_5ghz; u32 tmp32; @@ -4069,8 +4122,41 @@ static void b43_nphy_channel_setup(struct b43_wldev *dev, b43_nphy_tx_lp_fbw(dev); - if (dev->phy.rev >= 3 && 0) { - /* TODO */ + if (dev->phy.rev >= 3 && + dev->phy.n->spur_avoid != B43_SPUR_AVOID_DISABLE) { + bool avoid = false; + if (dev->phy.n->spur_avoid == B43_SPUR_AVOID_FORCE) { + avoid = true; + } else if (!b43_channel_type_is_40mhz(phy->channel_type)) { + if ((ch >= 5 && ch <= 8) || ch == 13 || ch == 14) + avoid = true; + } else { /* 40MHz */ + if (nphy->aband_spurwar_en && + (ch == 38 || ch == 102 || ch == 118)) + avoid = dev->dev->chip_id == 0x4716; + } + + b43_nphy_pmu_spur_avoid(dev, avoid); + + if (dev->dev->chip_id == 43222 || dev->dev->chip_id == 43224 || + dev->dev->chip_id == 43225) { + b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, + avoid ? 0x5341 : 0x8889); + b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8); + } + + if (dev->phy.rev == 3 || dev->phy.rev == 4) + ; /* TODO: reset PLL */ + + if (avoid) + b43_phy_set(dev, B43_NPHY_BBCFG, B43_NPHY_BBCFG_RSTRX); + else + b43_phy_mask(dev, B43_NPHY_BBCFG, + ~B43_NPHY_BBCFG_RSTRX & 0xFFFF); + + b43_nphy_reset_cca(dev); + + /* wl sets useless phy_isspuravoid here */ } b43_phy_write(dev, B43_NPHY_NDATAT_DUP40, 0x3830); -- 1.7.3.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html