Writes to the analog shift registers, which are issues by the initval programming function, require a 100 usec delay (similar to AR9002, but in a different register range). Signed-off-by: Felix Fietkau <nbd@xxxxxxxxxxx> --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 6 +++++- 1 files changed, 5 insertions(+), 1 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index a753a43..a491854 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -542,7 +542,11 @@ static void ar9003_hw_prog_ini(struct ath_hw *ah, u32 reg = INI_RA(iniArr, i, 0); u32 val = INI_RA(iniArr, i, column); - REG_WRITE(ah, reg, val); + if (reg >= 0x16000 && reg < 0x17000) + ath9k_hw_analog_shift_regwrite(ah, reg, val); + else + REG_WRITE(ah, reg, val); + DO_DELAY(regWrites); } } -- 1.6.4.2 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
