2.6.34-stable review patch. If anyone has any objections, please let us know.
------------------
From: Daniel Mack <daniel@xxxxxxxx>
commit 8a64c0f6b7ec7f758c4ef445e49f479e27fa2236 upstream.
When operating in 1-bit mode, SDAT1 is used as dedicated interrupt line.
However, the 8686 will only drive this line when the ECSI bit is set in
the CCCR_IF register.
Thanks to Alagu Sankar for pointing me in the right direction.
Signed-off-by: Daniel Mack <daniel@xxxxxxxx>
Cc: Alagu Sankar <alagusankar@xxxxxxxxxxx>
Cc: Volker Ernst <volker.ernst@xxxxxxxx>
Cc: Dan Williams <dcbw@xxxxxxxxxx>
Cc: John W. Linville <linville@xxxxxxxxxxxxx>
Cc: Holger Schurig <hs4233@xxxxxxxxxxxxxxxxxxxx>
Cc: Bing Zhao <bzhao@xxxxxxxxxxx>
Cc: libertas-dev@xxxxxxxxxxxxxxxxxxx
Cc: linux-wireless@xxxxxxxxxxxxxxx
Cc: linux-mmc@xxxxxxxxxxxxxxx
Acked-by: Dan Williams <dcbw@xxxxxxxxxx>
Signed-off-by: John W. Linville <linville@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/net/wireless/libertas/if_sdio.c | 22 ++++++++++++++++++++++
include/linux/mmc/sdio.h | 2 ++
2 files changed, 24 insertions(+)
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -35,6 +35,8 @@
#include <linux/mmc/card.h>
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/host.h>
#include "host.h"
#include "decl.h"
@@ -943,6 +945,7 @@ static int if_sdio_probe(struct sdio_fun
int ret, i;
unsigned int model;
struct if_sdio_packet *packet;
+ struct mmc_host *host = func->card->host;
lbs_deb_enter(LBS_DEB_SDIO);
@@ -1023,6 +1026,25 @@ static int if_sdio_probe(struct sdio_fun
if (ret)
goto disable;
+ /* For 1-bit transfers to the 8686 model, we need to enable the
+ * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
+ * bit to allow access to non-vendor registers. */
+ if ((card->model == IF_SDIO_MODEL_8686) &&
+ (host->caps & MMC_CAP_SDIO_IRQ) &&
+ (host->ios.bus_width == MMC_BUS_WIDTH_1)) {
+ u8 reg;
+
+ func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
+ reg = sdio_f0_readb(func, SDIO_CCCR_IF, &ret);
+ if (ret)
+ goto release_int;
+
+ reg |= SDIO_BUS_ECSI;
+ sdio_f0_writeb(func, reg, SDIO_CCCR_IF, &ret);
+ if (ret)
+ goto release_int;
+ }
+
card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret);
if (ret)
goto release_int;
--- a/include/linux/mmc/sdio.h
+++ b/include/linux/mmc/sdio.h
@@ -94,6 +94,8 @@
#define SDIO_BUS_WIDTH_1BIT 0x00
#define SDIO_BUS_WIDTH_4BIT 0x02
+#define SDIO_BUS_ECSI 0x20 /* Enable continuous SPI interrupt */
+#define SDIO_BUS_SCSI 0x40 /* Support continuous SPI interrupt */
#define SDIO_BUS_ASYNC_INT 0x20
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
