The periodic noise floor calibration is broken on this chip family, because
it keeps triggering a software-filtered noise floor calibration, but never
reads the result before uploading the history buffer value to the hardware.
Fix this with a call to ath9k_hw_getnf(), just like on AR9002.
Signed-off-by: Felix Fietkau <nbd@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 938365e..f51ab89 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -149,6 +149,12 @@ static bool ar9003_hw_calibrate(struct ath_hw *ah,
/* Do NF cal only at longer intervals */
if (longcal) {
/*
+ * Get the value from the previous NF cal and update
+ * history buffer.
+ */
+ ath9k_hw_getnf(ah, chan);
+
+ /*
* Load the NF from history buffer of the current channel.
* NF is slow time-variant, so it is OK to use a historical
* value.
--
1.6.4.2
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
