Search Linux Wireless

patch staging-remove-at76_usb-wireless-driver.patch added to gregkh-2.6 tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    Subject: Staging: remove at76_usb wireless driver.

to my gregkh-2.6 tree.  Its filename is

    staging-remove-at76_usb-wireless-driver.patch

This tree can be found at 
    http://www.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/patches/


>From foo@baz Thu Sep  3 11:58:09 PDT 2009
Date: Thu, 03 Sep 2009 11:58:09 -0700
To: Greg KH <greg@xxxxxxxxx>
From: Greg Kroah-Hartman <gregkh@xxxxxxx>
Subject: Staging: remove at76_usb wireless driver.

There is already an in-kernel driver for this hardware (since 2.6.30),
at76c50x-usb, and it supports all of the same devices.  So this driver
can now be deleted.

Cc: Kalle Valo <kalle.valo@xxxxxx> 
Cc: linux-wireless <linux-wireless@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>

---
 drivers/staging/Kconfig             |    2 
 drivers/staging/Makefile            |    1 
 drivers/staging/at76_usb/Kconfig    |    8 
 drivers/staging/at76_usb/Makefile   |    1 
 drivers/staging/at76_usb/TODO       |    7 
 drivers/staging/at76_usb/at76_usb.c | 5566 ------------------------------------
 drivers/staging/at76_usb/at76_usb.h |  706 ----
 7 files changed, 6291 deletions(-)

--- a/drivers/staging/at76_usb/at76_usb.c
+++ /dev/null
@@ -1,5566 +0,0 @@
-/*
- * at76c503/at76c505 USB driver
- *
- * Copyright (c) 2002 - 2003 Oliver Kurth
- * Copyright (c) 2004 Joerg Albert <joerg.albert@xxxxxx>
- * Copyright (c) 2004 Nick Jones
- * Copyright (c) 2004 Balint Seeber <n0_5p4m_p13453@xxxxxxxxxxx>
- * Copyright (c) 2007 Guido Guenther <agx@xxxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is part of the Berlios driver for WLAN USB devices based on the
- * Atmel AT76C503A/505/505A.
- *
- * Some iw_handler code was taken from airo.c, (C) 1999 Benjamin Reed
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/usb.h>
-#include <linux/netdevice.h>
-#include <linux/if_arp.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-#include <net/ieee80211_radiotap.h>
-#include <linux/firmware.h>
-#include <linux/leds.h>
-#include <linux/ieee80211.h>
-
-#include "at76_usb.h"
-
-/* Version information */
-#define DRIVER_NAME "at76_usb"
-#define DRIVER_VERSION	"0.17"
-#define DRIVER_DESC "Atmel at76x USB Wireless LAN Driver"
-
-/* at76_debug bits */
-#define DBG_PROGRESS		0x00000001	/* authentication/accociation */
-#define DBG_BSS_TABLE		0x00000002	/* show BSS table after scans */
-#define DBG_IOCTL		0x00000004	/* ioctl calls / settings */
-#define DBG_MAC_STATE		0x00000008	/* MAC state transitions */
-#define DBG_TX_DATA		0x00000010	/* tx header */
-#define DBG_TX_DATA_CONTENT	0x00000020	/* tx content */
-#define DBG_TX_MGMT		0x00000040	/* tx management */
-#define DBG_RX_DATA		0x00000080	/* rx data header */
-#define DBG_RX_DATA_CONTENT	0x00000100	/* rx data content */
-#define DBG_RX_MGMT		0x00000200	/* rx mgmt frame headers */
-#define DBG_RX_BEACON		0x00000400	/* rx beacon */
-#define DBG_RX_CTRL		0x00000800	/* rx control */
-#define DBG_RX_MGMT_CONTENT	0x00001000	/* rx mgmt content */
-#define DBG_RX_FRAGS		0x00002000	/* rx data fragment handling */
-#define DBG_DEVSTART		0x00004000	/* fw download, device start */
-#define DBG_URB			0x00008000	/* rx urb status, ... */
-#define DBG_RX_ATMEL_HDR	0x00010000	/* Atmel-specific Rx headers */
-#define DBG_PROC_ENTRY		0x00020000	/* procedure entries/exits */
-#define DBG_PM			0x00040000	/* power management settings */
-#define DBG_BSS_MATCH		0x00080000	/* BSS match failures */
-#define DBG_PARAMS		0x00100000	/* show configured parameters */
-#define DBG_WAIT_COMPLETE	0x00200000	/* command completion */
-#define DBG_RX_FRAGS_SKB	0x00400000	/* skb header of Rx fragments */
-#define DBG_BSS_TABLE_RM	0x00800000	/* purging bss table entries */
-#define DBG_MONITOR_MODE	0x01000000	/* monitor mode */
-#define DBG_MIB			0x02000000	/* dump all MIBs on startup */
-#define DBG_MGMT_TIMER		0x04000000	/* dump mgmt_timer ops */
-#define DBG_WE_EVENTS		0x08000000	/* dump wireless events */
-#define DBG_FW			0x10000000	/* firmware download */
-#define DBG_DFU			0x20000000	/* device firmware upgrade */
-
-#define DBG_DEFAULTS		0
-
-/* Use our own dbg macro */
-#define at76_dbg(bits, format, arg...) \
-	do { \
-		if (at76_debug & (bits)) \
-		printk(KERN_DEBUG DRIVER_NAME ": " format "\n" , ## arg); \
-	} while (0)
-
-static int at76_debug = DBG_DEFAULTS;
-
-/* Protect against concurrent firmware loading and parsing */
-static struct mutex fw_mutex;
-
-static struct fwentry firmwares[] = {
-	[0] = {""},
-	[BOARD_503_ISL3861] = {"atmel_at76c503-i3861.bin"},
-	[BOARD_503_ISL3863] = {"atmel_at76c503-i3863.bin"},
-	[BOARD_503] = {"atmel_at76c503-rfmd.bin"},
-	[BOARD_503_ACC] = {"atmel_at76c503-rfmd-acc.bin"},
-	[BOARD_505] = {"atmel_at76c505-rfmd.bin"},
-	[BOARD_505_2958] = {"atmel_at76c505-rfmd2958.bin"},
-	[BOARD_505A] = {"atmel_at76c505a-rfmd2958.bin"},
-	[BOARD_505AMX] = {"atmel_at76c505amx-rfmd.bin"},
-};
-
-#define USB_DEVICE_DATA(__ops)	.driver_info = (kernel_ulong_t)(__ops)
-
-static struct usb_device_id dev_table[] = {
-	/*
-	 * at76c503-i3861
-	 */
-	/* Generic AT76C503/3861 device */
-	{USB_DEVICE(0x03eb, 0x7603), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* Linksys WUSB11 v2.1/v2.6 */
-	{USB_DEVICE(0x066b, 0x2211), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* Netgear MA101 rev. A */
-	{USB_DEVICE(0x0864, 0x4100), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* Tekram U300C / Allnet ALL0193 */
-	{USB_DEVICE(0x0b3b, 0x1612), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* HP HN210W J7801A */
-	{USB_DEVICE(0x03f0, 0x011c), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* Sitecom/Z-Com/Zyxel M4Y-750 */
-	{USB_DEVICE(0x0cde, 0x0001), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* Dynalink/Askey WLL013 (intersil) */
-	{USB_DEVICE(0x069a, 0x0320), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* EZ connect 11Mpbs Wireless USB Adapter SMC2662W v1 */
-	{USB_DEVICE(0x0d5c, 0xa001), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* BenQ AWL300 */
-	{USB_DEVICE(0x04a5, 0x9000), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* Addtron AWU-120, Compex WLU11 */
-	{USB_DEVICE(0x05dd, 0xff31), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* Intel AP310 AnyPoint II USB */
-	{USB_DEVICE(0x8086, 0x0200), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* Dynalink L11U */
-	{USB_DEVICE(0x0d8e, 0x7100), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* Arescom WL-210, FCC id 07J-GL2411USB */
-	{USB_DEVICE(0x0d8e, 0x7110), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* I-O DATA WN-B11/USB */
-	{USB_DEVICE(0x04bb, 0x0919), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* BT Voyager 1010 */
-	{USB_DEVICE(0x069a, 0x0821), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/*
-	 * at76c503-i3863
-	 */
-	/* Generic AT76C503/3863 device */
-	{USB_DEVICE(0x03eb, 0x7604), USB_DEVICE_DATA(BOARD_503_ISL3863)},
-	/* Samsung SWL-2100U */
-	{USB_DEVICE(0x055d, 0xa000), USB_DEVICE_DATA(BOARD_503_ISL3863)},
-	/*
-	 * at76c503-rfmd
-	 */
-	/* Generic AT76C503/RFMD device */
-	{USB_DEVICE(0x03eb, 0x7605), USB_DEVICE_DATA(BOARD_503)},
-	/* Dynalink/Askey WLL013 (rfmd) */
-	{USB_DEVICE(0x069a, 0x0321), USB_DEVICE_DATA(BOARD_503)},
-	/* Linksys WUSB11 v2.6 */
-	{USB_DEVICE(0x077b, 0x2219), USB_DEVICE_DATA(BOARD_503)},
-	/* Network Everywhere NWU11B */
-	{USB_DEVICE(0x077b, 0x2227), USB_DEVICE_DATA(BOARD_503)},
-	/* Netgear MA101 rev. B */
-	{USB_DEVICE(0x0864, 0x4102), USB_DEVICE_DATA(BOARD_503)},
-	/* D-Link DWL-120 rev. E */
-	{USB_DEVICE(0x2001, 0x3200), USB_DEVICE_DATA(BOARD_503)},
-	/* Actiontec 802UAT1, HWU01150-01UK */
-	{USB_DEVICE(0x1668, 0x7605), USB_DEVICE_DATA(BOARD_503)},
-	/* AirVast W-Buddie WN210 */
-	{USB_DEVICE(0x03eb, 0x4102), USB_DEVICE_DATA(BOARD_503)},
-	/* Dick Smith Electronics XH1153 802.11b USB adapter */
-	{USB_DEVICE(0x1371, 0x5743), USB_DEVICE_DATA(BOARD_503)},
-	/* CNet CNUSB611 */
-	{USB_DEVICE(0x1371, 0x0001), USB_DEVICE_DATA(BOARD_503)},
-	/* FiberLine FL-WL200U */
-	{USB_DEVICE(0x1371, 0x0002), USB_DEVICE_DATA(BOARD_503)},
-	/* BenQ AWL400 USB stick */
-	{USB_DEVICE(0x04a5, 0x9001), USB_DEVICE_DATA(BOARD_503)},
-	/* 3Com 3CRSHEW696 */
-	{USB_DEVICE(0x0506, 0x0a01), USB_DEVICE_DATA(BOARD_503)},
-	/* Siemens Santis ADSL WLAN USB adapter WLL 013 */
-	{USB_DEVICE(0x0681, 0x001b), USB_DEVICE_DATA(BOARD_503)},
-	/* Belkin F5D6050, version 2 */
-	{USB_DEVICE(0x050d, 0x0050), USB_DEVICE_DATA(BOARD_503)},
-	/* iBlitzz, BWU613 (not *B or *SB) */
-	{USB_DEVICE(0x07b8, 0xb000), USB_DEVICE_DATA(BOARD_503)},
-	/* Gigabyte GN-WLBM101 */
-	{USB_DEVICE(0x1044, 0x8003), USB_DEVICE_DATA(BOARD_503)},
-	/* Planex GW-US11S */
-	{USB_DEVICE(0x2019, 0x3220), USB_DEVICE_DATA(BOARD_503)},
-	/* Internal WLAN adapter in h5[4,5]xx series iPAQs */
-	{USB_DEVICE(0x049f, 0x0032), USB_DEVICE_DATA(BOARD_503)},
-	/* Corega Wireless LAN USB-11 mini */
-	{USB_DEVICE(0x07aa, 0x0011), USB_DEVICE_DATA(BOARD_503)},
-	/* Corega Wireless LAN USB-11 mini2 */
-	{USB_DEVICE(0x07aa, 0x0018), USB_DEVICE_DATA(BOARD_503)},
-	/* Uniden PCW100 */
-	{USB_DEVICE(0x05dd, 0xff35), USB_DEVICE_DATA(BOARD_503)},
-	/*
-	 * at76c503-rfmd-acc
-	 */
-	/* SMC2664W */
-	{USB_DEVICE(0x083a, 0x3501), USB_DEVICE_DATA(BOARD_503_ACC)},
-	/* Belkin F5D6050, SMC2662W v2, SMC2662W-AR */
-	{USB_DEVICE(0x0d5c, 0xa002), USB_DEVICE_DATA(BOARD_503_ACC)},
-	/*
-	 * at76c505-rfmd
-	 */
-	/* Generic AT76C505/RFMD */
-	{USB_DEVICE(0x03eb, 0x7606), USB_DEVICE_DATA(BOARD_505)},
-	/*
-	 * at76c505-rfmd2958
-	 */
-	/* Generic AT76C505/RFMD, OvisLink WL-1130USB */
-	{USB_DEVICE(0x03eb, 0x7613), USB_DEVICE_DATA(BOARD_505_2958)},
-	/* Fiberline FL-WL240U */
-	{USB_DEVICE(0x1371, 0x0014), USB_DEVICE_DATA(BOARD_505_2958)},
-	/* CNet CNUSB-611G */
-	{USB_DEVICE(0x1371, 0x0013), USB_DEVICE_DATA(BOARD_505_2958)},
-	/* Linksys WUSB11 v2.8 */
-	{USB_DEVICE(0x1915, 0x2233), USB_DEVICE_DATA(BOARD_505_2958)},
-	/* Xterasys XN-2122B, IBlitzz BWU613B/BWU613SB */
-	{USB_DEVICE(0x12fd, 0x1001), USB_DEVICE_DATA(BOARD_505_2958)},
-	/* Corega WLAN USB Stick 11 */
-	{USB_DEVICE(0x07aa, 0x7613), USB_DEVICE_DATA(BOARD_505_2958)},
-	/* Microstar MSI Box MS6978 */
-	{USB_DEVICE(0x0db0, 0x1020), USB_DEVICE_DATA(BOARD_505_2958)},
-	/*
-	 * at76c505a-rfmd2958
-	 */
-	/* Generic AT76C505A device */
-	{USB_DEVICE(0x03eb, 0x7614), USB_DEVICE_DATA(BOARD_505A)},
-	/* Generic AT76C505AS device */
-	{USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A)},
-	/* Siemens Gigaset USB WLAN Adapter 11 */
-	{USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A)},
-	/* OQO Model 01+ Internal Wi-Fi */
-	{USB_DEVICE(0x1557, 0x0002), USB_DEVICE_DATA(BOARD_505A)},
-	/*
-	 * at76c505amx-rfmd
-	 */
-	/* Generic AT76C505AMX device */
-	{USB_DEVICE(0x03eb, 0x7615), USB_DEVICE_DATA(BOARD_505AMX)},
-	{}
-};
-
-MODULE_DEVICE_TABLE(usb, dev_table);
-
-/* Supported rates of this hardware, bit 7 marks basic rates */
-static const u8 hw_rates[] = { 0x82, 0x84, 0x0b, 0x16 };
-
-/* Frequency of each channel in MHz */
-static const long channel_frequency[] = {
-	2412, 2417, 2422, 2427, 2432, 2437, 2442,
-	2447, 2452, 2457, 2462, 2467, 2472, 2484
-};
-
-#define NUM_CHANNELS ARRAY_SIZE(channel_frequency)
-
-static const char *const preambles[] = { "long", "short", "auto" };
-
-static const char *const mac_states[] = {
-	[MAC_INIT] = "INIT",
-	[MAC_SCANNING] = "SCANNING",
-	[MAC_AUTH] = "AUTH",
-	[MAC_ASSOC] = "ASSOC",
-	[MAC_JOINING] = "JOINING",
-	[MAC_CONNECTED] = "CONNECTED",
-	[MAC_OWN_IBSS] = "OWN_IBSS"
-};
-
-/* Firmware download */
-/* DFU states */
-#define STATE_IDLE			0x00
-#define STATE_DETACH			0x01
-#define STATE_DFU_IDLE			0x02
-#define STATE_DFU_DOWNLOAD_SYNC		0x03
-#define STATE_DFU_DOWNLOAD_BUSY		0x04
-#define STATE_DFU_DOWNLOAD_IDLE		0x05
-#define STATE_DFU_MANIFEST_SYNC		0x06
-#define STATE_DFU_MANIFEST		0x07
-#define STATE_DFU_MANIFEST_WAIT_RESET	0x08
-#define STATE_DFU_UPLOAD_IDLE		0x09
-#define STATE_DFU_ERROR			0x0a
-
-/* DFU commands */
-#define DFU_DETACH			0
-#define DFU_DNLOAD			1
-#define DFU_UPLOAD			2
-#define DFU_GETSTATUS			3
-#define DFU_CLRSTATUS			4
-#define DFU_GETSTATE			5
-#define DFU_ABORT			6
-
-#define FW_BLOCK_SIZE 1024
-
-struct dfu_status {
-	unsigned char status;
-	unsigned char poll_timeout[3];
-	unsigned char state;
-	unsigned char string;
-} __attribute__((packed));
-
-static inline int at76_is_intersil(enum board_type board)
-{
-	return (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863);
-}
-
-static inline int at76_is_503rfmd(enum board_type board)
-{
-	return (board == BOARD_503 || board == BOARD_503_ACC);
-}
-
-static inline int at76_is_505a(enum board_type board)
-{
-	return (board == BOARD_505A || board == BOARD_505AMX);
-}
-
-/* Load a block of the first (internal) part of the firmware */
-static int at76_load_int_fw_block(struct usb_device *udev, int blockno,
-				  void *block, int size)
-{
-	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), DFU_DNLOAD,
-			       USB_TYPE_CLASS | USB_DIR_OUT |
-			       USB_RECIP_INTERFACE, blockno, 0, block, size,
-			       USB_CTRL_GET_TIMEOUT);
-}
-
-static int at76_dfu_get_status(struct usb_device *udev,
-			       struct dfu_status *status)
-{
-	int ret;
-
-	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATUS,
-			      USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
-			      0, 0, status, sizeof(struct dfu_status),
-			      USB_CTRL_GET_TIMEOUT);
-	return ret;
-}
-
-static u8 at76_dfu_get_state(struct usb_device *udev, u8 *state)
-{
-	int ret;
-
-	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATE,
-			      USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
-			      0, 0, state, 1, USB_CTRL_GET_TIMEOUT);
-	return ret;
-}
-
-/* Convert timeout from the DFU status to jiffies */
-static inline unsigned long at76_get_timeout(struct dfu_status *s)
-{
-	return msecs_to_jiffies((s->poll_timeout[2] << 16)
-				| (s->poll_timeout[1] << 8)
-				| (s->poll_timeout[0]));
-}
-
-/* Load internal firmware from the buffer.  If manifest_sync_timeout > 0, use
- * its value in jiffies in the MANIFEST_SYNC state.  */
-static int at76_usbdfu_download(struct usb_device *udev, u8 *buf, u32 size,
-				int manifest_sync_timeout)
-{
-	u8 *block;
-	struct dfu_status dfu_stat_buf;
-	int ret = 0;
-	int need_dfu_state = 1;
-	int is_done = 0;
-	u8 dfu_state = 0;
-	u32 dfu_timeout = 0;
-	int bsize = 0;
-	int blockno = 0;
-
-	at76_dbg(DBG_DFU, "%s( %p, %u, %d)", __func__, buf, size,
-		 manifest_sync_timeout);
-
-	if (!size) {
-		dev_printk(KERN_ERR, &udev->dev, "FW buffer length invalid!\n");
-		return -EINVAL;
-	}
-
-	block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL);
-	if (!block)
-		return -ENOMEM;
-
-	do {
-		if (need_dfu_state) {
-			ret = at76_dfu_get_state(udev, &dfu_state);
-			if (ret < 0) {
-				dev_printk(KERN_ERR, &udev->dev,
-					   "cannot get DFU state: %d\n", ret);
-				goto exit;
-			}
-			need_dfu_state = 0;
-		}
-
-		switch (dfu_state) {
-		case STATE_DFU_DOWNLOAD_SYNC:
-			at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_SYNC");
-			ret = at76_dfu_get_status(udev, &dfu_stat_buf);
-			if (ret >= 0) {
-				dfu_state = dfu_stat_buf.state;
-				dfu_timeout = at76_get_timeout(&dfu_stat_buf);
-				need_dfu_state = 0;
-			} else
-				dev_printk(KERN_ERR, &udev->dev,
-					   "at76_dfu_get_status returned %d\n",
-					   ret);
-			break;
-
-		case STATE_DFU_DOWNLOAD_BUSY:
-			at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_BUSY");
-			need_dfu_state = 1;
-
-			at76_dbg(DBG_DFU, "DFU: Resetting device");
-			schedule_timeout_interruptible(dfu_timeout);
-			break;
-
-		case STATE_DFU_DOWNLOAD_IDLE:
-			at76_dbg(DBG_DFU, "DOWNLOAD...");
-			/* fall through */
-		case STATE_DFU_IDLE:
-			at76_dbg(DBG_DFU, "DFU IDLE");
-
-			bsize = min_t(int, size, FW_BLOCK_SIZE);
-			memcpy(block, buf, bsize);
-			at76_dbg(DBG_DFU, "int fw, size left = %5d, "
-				 "bsize = %4d, blockno = %2d", size, bsize,
-				 blockno);
-			ret =
-			    at76_load_int_fw_block(udev, blockno, block, bsize);
-			buf += bsize;
-			size -= bsize;
-			blockno++;
-
-			if (ret != bsize)
-				dev_printk(KERN_ERR, &udev->dev,
-					   "at76_load_int_fw_block "
-					   "returned %d\n", ret);
-			need_dfu_state = 1;
-			break;
-
-		case STATE_DFU_MANIFEST_SYNC:
-			at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_SYNC");
-
-			ret = at76_dfu_get_status(udev, &dfu_stat_buf);
-			if (ret < 0)
-				break;
-
-			dfu_state = dfu_stat_buf.state;
-			dfu_timeout = at76_get_timeout(&dfu_stat_buf);
-			need_dfu_state = 0;
-
-			/* override the timeout from the status response,
-			   needed for AT76C505A */
-			if (manifest_sync_timeout > 0)
-				dfu_timeout = manifest_sync_timeout;
-
-			at76_dbg(DBG_DFU, "DFU: Waiting for manifest phase");
-			schedule_timeout_interruptible(dfu_timeout);
-			break;
-
-		case STATE_DFU_MANIFEST:
-			at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST");
-			is_done = 1;
-			break;
-
-		case STATE_DFU_MANIFEST_WAIT_RESET:
-			at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_WAIT_RESET");
-			is_done = 1;
-			break;
-
-		case STATE_DFU_UPLOAD_IDLE:
-			at76_dbg(DBG_DFU, "STATE_DFU_UPLOAD_IDLE");
-			break;
-
-		case STATE_DFU_ERROR:
-			at76_dbg(DBG_DFU, "STATE_DFU_ERROR");
-			ret = -EPIPE;
-			break;
-
-		default:
-			at76_dbg(DBG_DFU, "DFU UNKNOWN STATE (%d)", dfu_state);
-			ret = -EINVAL;
-			break;
-		}
-	} while (!is_done && (ret >= 0));
-
-exit:
-	kfree(block);
-	if (ret >= 0)
-		ret = 0;
-
-	return ret;
-}
-
-/* Report that the scan results are ready */
-static inline void at76_iwevent_scan_complete(struct net_device *netdev)
-{
-	union iwreq_data wrqu;
-	wrqu.data.length = 0;
-	wrqu.data.flags = 0;
-	wireless_send_event(netdev, SIOCGIWSCAN, &wrqu, NULL);
-	at76_dbg(DBG_WE_EVENTS, "%s: SIOCGIWSCAN sent", netdev->name);
-}
-
-static inline void at76_iwevent_bss_connect(struct net_device *netdev,
-					    u8 *bssid)
-{
-	union iwreq_data wrqu;
-	wrqu.data.length = 0;
-	wrqu.data.flags = 0;
-	memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN);
-	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-	wireless_send_event(netdev, SIOCGIWAP, &wrqu, NULL);
-	at76_dbg(DBG_WE_EVENTS, "%s: %s: SIOCGIWAP sent", netdev->name,
-		 __func__);
-}
-
-static inline void at76_iwevent_bss_disconnect(struct net_device *netdev)
-{
-	union iwreq_data wrqu;
-	wrqu.data.length = 0;
-	wrqu.data.flags = 0;
-	memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
-	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-	wireless_send_event(netdev, SIOCGIWAP, &wrqu, NULL);
-	at76_dbg(DBG_WE_EVENTS, "%s: %s: SIOCGIWAP sent", netdev->name,
-		 __func__);
-}
-
-#define HEX2STR_BUFFERS 4
-#define HEX2STR_MAX_LEN 64
-#define BIN2HEX(x) ((x) < 10 ? '0' + (x) : (x) + 'A' - 10)
-
-/* Convert binary data into hex string */
-static char *hex2str(void *buf, int len)
-{
-	static atomic_t a = ATOMIC_INIT(0);
-	static char bufs[HEX2STR_BUFFERS][3 * HEX2STR_MAX_LEN + 1];
-	char *ret = bufs[atomic_inc_return(&a) & (HEX2STR_BUFFERS - 1)];
-	char *obuf = ret;
-	u8 *ibuf = buf;
-
-	if (len > HEX2STR_MAX_LEN)
-		len = HEX2STR_MAX_LEN;
-
-	if (len <= 0) {
-		ret[0] = '\0';
-		return ret;
-	}
-
-	while (len--) {
-		*obuf++ = BIN2HEX(*ibuf >> 4);
-		*obuf++ = BIN2HEX(*ibuf & 0xf);
-		*obuf++ = '-';
-		ibuf++;
-	}
-	*(--obuf) = '\0';
-
-	return ret;
-}
-
-/* LED trigger */
-static int tx_activity;
-static void at76_ledtrig_tx_timerfunc(unsigned long data);
-static DEFINE_TIMER(ledtrig_tx_timer, at76_ledtrig_tx_timerfunc, 0, 0);
-DEFINE_LED_TRIGGER(ledtrig_tx);
-
-static void at76_ledtrig_tx_timerfunc(unsigned long data)
-{
-	static int tx_lastactivity;
-
-	if (tx_lastactivity != tx_activity) {
-		tx_lastactivity = tx_activity;
-		led_trigger_event(ledtrig_tx, LED_FULL);
-		mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4);
-	} else
-		led_trigger_event(ledtrig_tx, LED_OFF);
-}
-
-static void at76_ledtrig_tx_activity(void)
-{
-	tx_activity++;
-	if (!timer_pending(&ledtrig_tx_timer))
-		mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4);
-}
-
-/* Check if the given ssid is hidden */
-static inline int at76_is_hidden_ssid(u8 *ssid, int length)
-{
-	static const u8 zeros[32];
-
-	if (length == 0)
-		return 1;
-
-	if (length == 1 && ssid[0] == ' ')
-		return 1;
-
-	return (memcmp(ssid, zeros, length) == 0);
-}
-
-static inline void at76_free_bss_list(struct at76_priv *priv)
-{
-	struct list_head *next, *ptr;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->bss_list_spinlock, flags);
-
-	priv->curr_bss = NULL;
-
-	list_for_each_safe(ptr, next, &priv->bss_list) {
-		list_del(ptr);
-		kfree(list_entry(ptr, struct bss_info, list));
-	}
-
-	spin_unlock_irqrestore(&priv->bss_list_spinlock, flags);
-}
-
-static int at76_remap(struct usb_device *udev)
-{
-	int ret;
-	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0a,
-			      USB_TYPE_VENDOR | USB_DIR_OUT |
-			      USB_RECIP_INTERFACE, 0, 0, NULL, 0,
-			      USB_CTRL_GET_TIMEOUT);
-	if (ret < 0)
-		return ret;
-	return 0;
-}
-
-static int at76_get_op_mode(struct usb_device *udev)
-{
-	int ret;
-	u8 saved;
-	u8 *op_mode;
-
-	op_mode = kmalloc(1, GFP_NOIO);
-	if (!op_mode)
-		return -ENOMEM;
-	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
-			      USB_TYPE_VENDOR | USB_DIR_IN |
-			      USB_RECIP_INTERFACE, 0x01, 0, op_mode, 1,
-			      USB_CTRL_GET_TIMEOUT);
-	saved = *op_mode;
-	kfree(op_mode);
-
-	if (ret < 0)
-		return ret;
-	else if (ret < 1)
-		return -EIO;
-	else
-		return saved;
-}
-
-/* Load a block of the second ("external") part of the firmware */
-static inline int at76_load_ext_fw_block(struct usb_device *udev, int blockno,
-					 void *block, int size)
-{
-	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e,
-			       USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
-			       0x0802, blockno, block, size,
-			       USB_CTRL_GET_TIMEOUT);
-}
-
-static inline int at76_get_hw_cfg(struct usb_device *udev,
-				  union at76_hwcfg *buf, int buf_size)
-{
-	return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
-			       USB_TYPE_VENDOR | USB_DIR_IN |
-			       USB_RECIP_INTERFACE, 0x0a02, 0,
-			       buf, buf_size, USB_CTRL_GET_TIMEOUT);
-}
-
-/* Intersil boards use a different "value" for GetHWConfig requests */
-static inline int at76_get_hw_cfg_intersil(struct usb_device *udev,
-					   union at76_hwcfg *buf, int buf_size)
-{
-	return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
-			       USB_TYPE_VENDOR | USB_DIR_IN |
-			       USB_RECIP_INTERFACE, 0x0902, 0,
-			       buf, buf_size, USB_CTRL_GET_TIMEOUT);
-}
-
-/* Get the hardware configuration for the adapter and put it to the appropriate
- * fields of 'priv' (the GetHWConfig request and interpretation of the result
- * depends on the board type) */
-static int at76_get_hw_config(struct at76_priv *priv)
-{
-	int ret;
-	union at76_hwcfg *hwcfg = kmalloc(sizeof(*hwcfg), GFP_KERNEL);
-
-	if (!hwcfg)
-		return -ENOMEM;
-
-	if (at76_is_intersil(priv->board_type)) {
-		ret = at76_get_hw_cfg_intersil(priv->udev, hwcfg,
-					       sizeof(hwcfg->i));
-		if (ret < 0)
-			goto exit;
-		memcpy(priv->mac_addr, hwcfg->i.mac_addr, ETH_ALEN);
-		priv->regulatory_domain = hwcfg->i.regulatory_domain;
-	} else if (at76_is_503rfmd(priv->board_type)) {
-		ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r3));
-		if (ret < 0)
-			goto exit;
-		memcpy(priv->mac_addr, hwcfg->r3.mac_addr, ETH_ALEN);
-		priv->regulatory_domain = hwcfg->r3.regulatory_domain;
-	} else {
-		ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r5));
-		if (ret < 0)
-			goto exit;
-		memcpy(priv->mac_addr, hwcfg->r5.mac_addr, ETH_ALEN);
-		priv->regulatory_domain = hwcfg->r5.regulatory_domain;
-	}
-
-exit:
-	kfree(hwcfg);
-	if (ret < 0)
-		printk(KERN_ERR "%s: cannot get HW Config (error %d)\n",
-		       priv->netdev->name, ret);
-
-	return ret;
-}
-
-static struct reg_domain const *at76_get_reg_domain(u16 code)
-{
-	int i;
-	static struct reg_domain const fd_tab[] = {
-		{0x10, "FCC (USA)", 0x7ff},	/* ch 1-11 */
-		{0x20, "IC (Canada)", 0x7ff},	/* ch 1-11 */
-		{0x30, "ETSI (most of Europe)", 0x1fff},	/* ch 1-13 */
-		{0x31, "Spain", 0x600},	/* ch 10-11 */
-		{0x32, "France", 0x1e00},	/* ch 10-13 */
-		{0x40, "MKK (Japan)", 0x2000},	/* ch 14 */
-		{0x41, "MKK1 (Japan)", 0x3fff},	/* ch 1-14 */
-		{0x50, "Israel", 0x3fc},	/* ch 3-9 */
-		{0x00, "<unknown>", 0xffffffff}	/* ch 1-32 */
-	};
-
-	/* Last entry is fallback for unknown domain code */
-	for (i = 0; i < ARRAY_SIZE(fd_tab) - 1; i++)
-		if (code == fd_tab[i].code)
-			break;
-
-	return &fd_tab[i];
-}
-
-static inline int at76_get_mib(struct usb_device *udev, u16 mib, void *buf,
-			       int buf_size)
-{
-	int ret;
-
-	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
-			      USB_TYPE_VENDOR | USB_DIR_IN |
-			      USB_RECIP_INTERFACE, mib << 8, 0, buf, buf_size,
-			      USB_CTRL_GET_TIMEOUT);
-	if (ret >= 0 && ret != buf_size)
-		return -EIO;
-	return ret;
-}
-
-/* Return positive number for status, negative for an error */
-static inline int at76_get_cmd_status(struct usb_device *udev, u8 cmd)
-{
-	u8 *stat_buf;
-	int ret;
-
-	stat_buf = kmalloc(40, GFP_NOIO);
-	if (!stat_buf)
-		return -ENOMEM;
-
-	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x22,
-			      USB_TYPE_VENDOR | USB_DIR_IN |
-			      USB_RECIP_INTERFACE, cmd, 0, stat_buf,
-			      40, USB_CTRL_GET_TIMEOUT);
-	if (ret >= 0)
-		ret = stat_buf[5];
-	kfree(stat_buf);
-
-	return ret;
-}
-
-static int at76_set_card_command(struct usb_device *udev, u8 cmd, void *buf,
-				 int buf_size)
-{
-	int ret;
-	struct at76_command *cmd_buf = kmalloc(sizeof(struct at76_command) +
-					       buf_size, GFP_KERNEL);
-
-	if (!cmd_buf)
-		return -ENOMEM;
-
-	cmd_buf->cmd = cmd;
-	cmd_buf->reserved = 0;
-	cmd_buf->size = cpu_to_le16(buf_size);
-	memcpy(cmd_buf->data, buf, buf_size);
-
-	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e,
-			      USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
-			      0, 0, cmd_buf,
-			      sizeof(struct at76_command) + buf_size,
-			      USB_CTRL_GET_TIMEOUT);
-	kfree(cmd_buf);
-	return ret;
-}
-
-#define MAKE_CMD_STATUS_CASE(c)	case (c): return #c
-static const char *at76_get_cmd_status_string(u8 cmd_status)
-{
-	switch (cmd_status) {
-		MAKE_CMD_STATUS_CASE(CMD_STATUS_IDLE);
-		MAKE_CMD_STATUS_CASE(CMD_STATUS_COMPLETE);
-		MAKE_CMD_STATUS_CASE(CMD_STATUS_UNKNOWN);
-		MAKE_CMD_STATUS_CASE(CMD_STATUS_INVALID_PARAMETER);
-		MAKE_CMD_STATUS_CASE(CMD_STATUS_FUNCTION_NOT_SUPPORTED);
-		MAKE_CMD_STATUS_CASE(CMD_STATUS_TIME_OUT);
-		MAKE_CMD_STATUS_CASE(CMD_STATUS_IN_PROGRESS);
-		MAKE_CMD_STATUS_CASE(CMD_STATUS_HOST_FAILURE);
-		MAKE_CMD_STATUS_CASE(CMD_STATUS_SCAN_FAILED);
-	}
-
-	return "UNKNOWN";
-}
-
-/* Wait until the command is completed */
-static int at76_wait_completion(struct at76_priv *priv, int cmd)
-{
-	int status = 0;
-	unsigned long timeout = jiffies + CMD_COMPLETION_TIMEOUT;
-
-	do {
-		status = at76_get_cmd_status(priv->udev, cmd);
-		if (status < 0) {
-			printk(KERN_ERR "%s: at76_get_cmd_status failed: %d\n",
-			       priv->netdev->name, status);
-			break;
-		}
-
-		at76_dbg(DBG_WAIT_COMPLETE,
-			 "%s: Waiting on cmd %d, status = %d (%s)",
-			 priv->netdev->name, cmd, status,
-			 at76_get_cmd_status_string(status));
-
-		if (status != CMD_STATUS_IN_PROGRESS
-		    && status != CMD_STATUS_IDLE)
-			break;
-
-		schedule_timeout_interruptible(HZ / 10);	/* 100 ms */
-		if (time_after(jiffies, timeout)) {
-			printk(KERN_ERR
-			       "%s: completion timeout for command %d\n",
-			       priv->netdev->name, cmd);
-			status = -ETIMEDOUT;
-			break;
-		}
-	} while (1);
-
-	return status;
-}
-
-static int at76_set_mib(struct at76_priv *priv, struct set_mib_buffer *buf)
-{
-	int ret;
-
-	ret = at76_set_card_command(priv->udev, CMD_SET_MIB, buf,
-				    offsetof(struct set_mib_buffer,
-					     data) + buf->size);
-	if (ret < 0)
-		return ret;
-
-	ret = at76_wait_completion(priv, CMD_SET_MIB);
-	if (ret != CMD_STATUS_COMPLETE) {
-		printk(KERN_INFO
-		       "%s: set_mib: at76_wait_completion failed "
-		       "with %d\n", priv->netdev->name, ret);
-		ret = -EIO;
-	}
-
-	return ret;
-}
-
-/* Return < 0 on error, == 0 if no command sent, == 1 if cmd sent */
-static int at76_set_radio(struct at76_priv *priv, int enable)
-{
-	int ret;
-	int cmd;
-
-	if (priv->radio_on == enable)
-		return 0;
-
-	cmd = enable ? CMD_RADIO_ON : CMD_RADIO_OFF;
-
-	ret = at76_set_card_command(priv->udev, cmd, NULL, 0);
-	if (ret < 0)
-		printk(KERN_ERR "%s: at76_set_card_command(%d) failed: %d\n",
-		       priv->netdev->name, cmd, ret);
-	else
-		ret = 1;
-
-	priv->radio_on = enable;
-	return ret;
-}
-
-/* Set current power save mode (AT76_PM_OFF/AT76_PM_ON/AT76_PM_SMART) */
-static int at76_set_pm_mode(struct at76_priv *priv)
-{
-	int ret = 0;
-
-	priv->mib_buf.type = MIB_MAC_MGMT;
-	priv->mib_buf.size = 1;
-	priv->mib_buf.index = offsetof(struct mib_mac_mgmt, power_mgmt_mode);
-	priv->mib_buf.data.byte = priv->pm_mode;
-
-	ret = at76_set_mib(priv, &priv->mib_buf);
-	if (ret < 0)
-		printk(KERN_ERR "%s: set_mib (pm_mode) failed: %d\n",
-		       priv->netdev->name, ret);
-
-	return ret;
-}
-
-/* Set the association id for power save mode */
-static int at76_set_associd(struct at76_priv *priv, u16 id)
-{
-	int ret = 0;
-
-	priv->mib_buf.type = MIB_MAC_MGMT;
-	priv->mib_buf.size = 2;
-	priv->mib_buf.index = offsetof(struct mib_mac_mgmt, station_id);
-	priv->mib_buf.data.word = cpu_to_le16(id);
-
-	ret = at76_set_mib(priv, &priv->mib_buf);
-	if (ret < 0)
-		printk(KERN_ERR "%s: set_mib (associd) failed: %d\n",
-		       priv->netdev->name, ret);
-
-	return ret;
-}
-
-/* Set the listen interval for power save mode */
-static int at76_set_listen_interval(struct at76_priv *priv, u16 interval)
-{
-	int ret = 0;
-
-	priv->mib_buf.type = MIB_MAC;
-	priv->mib_buf.size = 2;
-	priv->mib_buf.index = offsetof(struct mib_mac, listen_interval);
-	priv->mib_buf.data.word = cpu_to_le16(interval);
-
-	ret = at76_set_mib(priv, &priv->mib_buf);
-	if (ret < 0)
-		printk(KERN_ERR
-		       "%s: set_mib (listen_interval) failed: %d\n",
-		       priv->netdev->name, ret);
-
-	return ret;
-}
-
-static int at76_set_preamble(struct at76_priv *priv, u8 type)
-{
-	int ret = 0;
-
-	priv->mib_buf.type = MIB_LOCAL;
-	priv->mib_buf.size = 1;
-	priv->mib_buf.index = offsetof(struct mib_local, preamble_type);
-	priv->mib_buf.data.byte = type;
-
-	ret = at76_set_mib(priv, &priv->mib_buf);
-	if (ret < 0)
-		printk(KERN_ERR "%s: set_mib (preamble) failed: %d\n",
-		       priv->netdev->name, ret);
-
-	return ret;
-}
-
-static int at76_set_frag(struct at76_priv *priv, u16 size)
-{
-	int ret = 0;
-
-	priv->mib_buf.type = MIB_MAC;
-	priv->mib_buf.size = 2;
-	priv->mib_buf.index = offsetof(struct mib_mac, frag_threshold);
-	priv->mib_buf.data.word = cpu_to_le16(size);
-
-	ret = at76_set_mib(priv, &priv->mib_buf);
-	if (ret < 0)
-		printk(KERN_ERR "%s: set_mib (frag threshold) failed: %d\n",
-		       priv->netdev->name, ret);
-
-	return ret;
-}
-
-static int at76_set_rts(struct at76_priv *priv, u16 size)
-{
-	int ret = 0;
-
-	priv->mib_buf.type = MIB_MAC;
-	priv->mib_buf.size = 2;
-	priv->mib_buf.index = offsetof(struct mib_mac, rts_threshold);
-	priv->mib_buf.data.word = cpu_to_le16(size);
-
-	ret = at76_set_mib(priv, &priv->mib_buf);
-	if (ret < 0)
-		printk(KERN_ERR "%s: set_mib (rts) failed: %d\n",
-		       priv->netdev->name, ret);
-
-	return ret;
-}
-
-static int at76_set_autorate_fallback(struct at76_priv *priv, int onoff)
-{
-	int ret = 0;
-
-	priv->mib_buf.type = MIB_LOCAL;
-	priv->mib_buf.size = 1;
-	priv->mib_buf.index = offsetof(struct mib_local, txautorate_fallback);
-	priv->mib_buf.data.byte = onoff;
-
-	ret = at76_set_mib(priv, &priv->mib_buf);
-	if (ret < 0)
-		printk(KERN_ERR "%s: set_mib (autorate fallback) failed: %d\n",
-		       priv->netdev->name, ret);
-
-	return ret;
-}
-
-static int at76_add_mac_address(struct at76_priv *priv, void *addr)
-{
-	int ret = 0;
-
-	priv->mib_buf.type = MIB_MAC_ADDR;
-	priv->mib_buf.size = ETH_ALEN;
-	priv->mib_buf.index = offsetof(struct mib_mac_addr, mac_addr);
-	memcpy(priv->mib_buf.data.addr, addr, ETH_ALEN);
-
-	ret = at76_set_mib(priv, &priv->mib_buf);
-	if (ret < 0)
-		printk(KERN_ERR "%s: set_mib (MAC_ADDR, mac_addr) failed: %d\n",
-		       priv->netdev->name, ret);
-
-	return ret;
-}
-
-static void at76_dump_mib_mac_addr(struct at76_priv *priv)
-{
-	int i;
-	int ret;
-	struct mib_mac_addr *m = kmalloc(sizeof(struct mib_mac_addr),
-					 GFP_KERNEL);
-
-	if (!m)
-		return;
-
-	ret = at76_get_mib(priv->udev, MIB_MAC_ADDR, m,
-			   sizeof(struct mib_mac_addr));
-	if (ret < 0) {
-		printk(KERN_ERR "%s: at76_get_mib (MAC_ADDR) failed: %d\n",
-		       priv->netdev->name, ret);
-		goto exit;
-	}
-
-	at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: mac_addr %pM res 0x%x 0x%x",
-		 priv->netdev->name, m->mac_addr, m->res[0], m->res[1]);
-	for (i = 0; i < ARRAY_SIZE(m->group_addr); i++)
-		at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: group addr %d: %pM, "
-			 "status %d", priv->netdev->name, i,
-			 m->group_addr[i], m->group_addr_status[i]);
-exit:
-	kfree(m);
-}
-
-static void at76_dump_mib_mac_wep(struct at76_priv *priv)
-{
-	int i;
-	int ret;
-	int key_len;
-	struct mib_mac_wep *m = kmalloc(sizeof(struct mib_mac_wep), GFP_KERNEL);
-
-	if (!m)
-		return;
-
-	ret = at76_get_mib(priv->udev, MIB_MAC_WEP, m,
-			   sizeof(struct mib_mac_wep));
-	if (ret < 0) {
-		printk(KERN_ERR "%s: at76_get_mib (MAC_WEP) failed: %d\n",
-		       priv->netdev->name, ret);
-		goto exit;
-	}
-
-	at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: priv_invoked %u def_key_id %u "
-		 "key_len %u excl_unencr %u wep_icv_err %u wep_excluded %u "
-		 "encr_level %u key %d", priv->netdev->name,
-		 m->privacy_invoked, m->wep_default_key_id,
-		 m->wep_key_mapping_len, m->exclude_unencrypted,
-		 le32_to_cpu(m->wep_icv_error_count),
-		 le32_to_cpu(m->wep_excluded_count), m->encryption_level,
-		 m->wep_default_key_id);
-
-	key_len = (m->encryption_level == 1) ?
-	    WEP_SMALL_KEY_LEN : WEP_LARGE_KEY_LEN;
-
-	for (i = 0; i < WEP_KEYS; i++)
-		at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: key %d: %s",
-			 priv->netdev->name, i,
-			 hex2str(m->wep_default_keyvalue[i], key_len));
-exit:
-	kfree(m);
-}
-
-static void at76_dump_mib_mac_mgmt(struct at76_priv *priv)
-{
-	int ret;
-	struct mib_mac_mgmt *m = kmalloc(sizeof(struct mib_mac_mgmt),
-					 GFP_KERNEL);
-
-	if (!m)
-		return;
-
-	ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, m,
-			   sizeof(struct mib_mac_mgmt));
-	if (ret < 0) {
-		printk(KERN_ERR "%s: at76_get_mib (MAC_MGMT) failed: %d\n",
-		       priv->netdev->name, ret);
-		goto exit;
-	}
-
-	at76_dbg(DBG_MIB, "%s: MIB MAC_MGMT: beacon_period %d CFP_max_duration "
-		 "%d medium_occupancy_limit %d station_id 0x%x ATIM_window %d "
-		 "CFP_mode %d privacy_opt_impl %d DTIM_period %d CFP_period %d "
-		 "current_bssid %pM scurrent_essid %s current_bss_type %d "
-		 "pm_mode %d ibss_change %d res %d "
-		 "multi_domain_capability_implemented %d "
-		 "international_roaming %d country_string %.3s",
-		 priv->netdev->name, le16_to_cpu(m->beacon_period),
-		 le16_to_cpu(m->CFP_max_duration),
-		 le16_to_cpu(m->medium_occupancy_limit),
-		 le16_to_cpu(m->station_id), le16_to_cpu(m->ATIM_window),
-		 m->CFP_mode, m->privacy_option_implemented, m->DTIM_period,
-		 m->CFP_period, m->current_bssid,
-		 hex2str(m->current_essid, IW_ESSID_MAX_SIZE),
-		 m->current_bss_type, m->power_mgmt_mode, m->ibss_change,
-		 m->res, m->multi_domain_capability_implemented,
-		 m->multi_domain_capability_enabled, m->country_string);
-exit:
-	kfree(m);
-}
-
-static void at76_dump_mib_mac(struct at76_priv *priv)
-{
-	int ret;
-	struct mib_mac *m = kmalloc(sizeof(struct mib_mac), GFP_KERNEL);
-
-	if (!m)
-		return;
-
-	ret = at76_get_mib(priv->udev, MIB_MAC, m, sizeof(struct mib_mac));
-	if (ret < 0) {
-		printk(KERN_ERR "%s: at76_get_mib (MAC) failed: %d\n",
-		       priv->netdev->name, ret);
-		goto exit;
-	}
-
-	at76_dbg(DBG_MIB, "%s: MIB MAC: max_tx_msdu_lifetime %d "
-		 "max_rx_lifetime %d frag_threshold %d rts_threshold %d "
-		 "cwmin %d cwmax %d short_retry_time %d long_retry_time %d "
-		 "scan_type %d scan_channel %d probe_delay %u "
-		 "min_channel_time %d max_channel_time %d listen_int %d "
-		 "desired_ssid %s desired_bssid %pM desired_bsstype %d",
-		 priv->netdev->name, le32_to_cpu(m->max_tx_msdu_lifetime),
-		 le32_to_cpu(m->max_rx_lifetime),
-		 le16_to_cpu(m->frag_threshold), le16_to_cpu(m->rts_threshold),
-		 le16_to_cpu(m->cwmin), le16_to_cpu(m->cwmax),
-		 m->short_retry_time, m->long_retry_time, m->scan_type,
-		 m->scan_channel, le16_to_cpu(m->probe_delay),
-		 le16_to_cpu(m->min_channel_time),
-		 le16_to_cpu(m->max_channel_time),
-		 le16_to_cpu(m->listen_interval),
-		 hex2str(m->desired_ssid, IW_ESSID_MAX_SIZE),
-		 m->desired_bssid, m->desired_bsstype);
-exit:
-	kfree(m);
-}
-
-static void at76_dump_mib_phy(struct at76_priv *priv)
-{
-	int ret;
-	struct mib_phy *m = kmalloc(sizeof(struct mib_phy), GFP_KERNEL);
-
-	if (!m)
-		return;
-
-	ret = at76_get_mib(priv->udev, MIB_PHY, m, sizeof(struct mib_phy));
-	if (ret < 0) {
-		printk(KERN_ERR "%s: at76_get_mib (PHY) failed: %d\n",
-		       priv->netdev->name, ret);
-		goto exit;
-	}
-
-	at76_dbg(DBG_MIB, "%s: MIB PHY: ed_threshold %d slot_time %d "
-		 "sifs_time %d preamble_length %d plcp_header_length %d "
-		 "mpdu_max_length %d cca_mode_supported %d operation_rate_set "
-		 "0x%x 0x%x 0x%x 0x%x channel_id %d current_cca_mode %d "
-		 "phy_type %d current_reg_domain %d",
-		 priv->netdev->name, le32_to_cpu(m->ed_threshold),
-		 le16_to_cpu(m->slot_time), le16_to_cpu(m->sifs_time),
-		 le16_to_cpu(m->preamble_length),
-		 le16_to_cpu(m->plcp_header_length),
-		 le16_to_cpu(m->mpdu_max_length),
-		 le16_to_cpu(m->cca_mode_supported), m->operation_rate_set[0],
-		 m->operation_rate_set[1], m->operation_rate_set[2],
-		 m->operation_rate_set[3], m->channel_id, m->current_cca_mode,
-		 m->phy_type, m->current_reg_domain);
-exit:
-	kfree(m);
-}
-
-static void at76_dump_mib_local(struct at76_priv *priv)
-{
-	int ret;
-	struct mib_local *m = kmalloc(sizeof(struct mib_phy), GFP_KERNEL);
-
-	if (!m)
-		return;
-
-	ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(struct mib_local));
-	if (ret < 0) {
-		printk(KERN_ERR "%s: at76_get_mib (LOCAL) failed: %d\n",
-		       priv->netdev->name, ret);
-		goto exit;
-	}
-
-	at76_dbg(DBG_MIB, "%s: MIB LOCAL: beacon_enable %d "
-		 "txautorate_fallback %d ssid_size %d promiscuous_mode %d "
-		 "preamble_type %d", priv->netdev->name, m->beacon_enable,
-		 m->txautorate_fallback, m->ssid_size, m->promiscuous_mode,
-		 m->preamble_type);
-exit:
-	kfree(m);
-}
-
-static void at76_dump_mib_mdomain(struct at76_priv *priv)
-{
-	int ret;
-	struct mib_mdomain *m = kmalloc(sizeof(struct mib_mdomain), GFP_KERNEL);
-
-	if (!m)
-		return;
-
-	ret = at76_get_mib(priv->udev, MIB_MDOMAIN, m,
-			   sizeof(struct mib_mdomain));
-	if (ret < 0) {
-		printk(KERN_ERR "%s: at76_get_mib (MDOMAIN) failed: %d\n",
-		       priv->netdev->name, ret);
-		goto exit;
-	}
-
-	at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: channel_list %s",
-		 priv->netdev->name,
-		 hex2str(m->channel_list, sizeof(m->channel_list)));
-
-	at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: tx_powerlevel %s",
-		 priv->netdev->name,
-		 hex2str(m->tx_powerlevel, sizeof(m->tx_powerlevel)));
-exit:
-	kfree(m);
-}
-
-static int at76_get_current_bssid(struct at76_priv *priv)
-{
-	int ret = 0;
-	struct mib_mac_mgmt *mac_mgmt =
-	    kmalloc(sizeof(struct mib_mac_mgmt), GFP_KERNEL);
-
-	if (!mac_mgmt) {
-		ret = -ENOMEM;
-		goto exit;
-	}
-
-	ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, mac_mgmt,
-			   sizeof(struct mib_mac_mgmt));
-	if (ret < 0) {
-		printk(KERN_ERR "%s: at76_get_mib failed: %d\n",
-		       priv->netdev->name, ret);
-		goto error;
-	}
-	memcpy(priv->bssid, mac_mgmt->current_bssid, ETH_ALEN);
-	printk(KERN_INFO "%s: using BSSID %pM\n", priv->netdev->name,
-	       priv->bssid);
-error:
-	kfree(mac_mgmt);
-exit:
-	return ret;
-}
-
-static int at76_get_current_channel(struct at76_priv *priv)
-{
-	int ret = 0;
-	struct mib_phy *phy = kmalloc(sizeof(struct mib_phy), GFP_KERNEL);
-
-	if (!phy) {
-		ret = -ENOMEM;
-		goto exit;
-	}
-	ret = at76_get_mib(priv->udev, MIB_PHY, phy, sizeof(struct mib_phy));
-	if (ret < 0) {
-		printk(KERN_ERR "%s: at76_get_mib(MIB_PHY) failed: %d\n",
-		       priv->netdev->name, ret);
-		goto error;
-	}
-	priv->channel = phy->channel_id;
-error:
-	kfree(phy);
-exit:
-	return ret;
-}
-
-/**
- * at76_start_scan - start a scan
- *
- * @use_essid - use the configured ESSID in non passive mode
- */
-static int at76_start_scan(struct at76_priv *priv, int use_essid)
-{
-	struct at76_req_scan scan;
-
-	memset(&scan, 0, sizeof(struct at76_req_scan));
-	memset(scan.bssid, 0xff, ETH_ALEN);
-
-	if (use_essid) {
-		memcpy(scan.essid, priv->essid, IW_ESSID_MAX_SIZE);
-		scan.essid_size = priv->essid_size;
-	} else
-		scan.essid_size = 0;
-
-	/* jal: why should we start at a certain channel? we do scan the whole
-	   range allowed by reg domain. */
-	scan.channel = priv->channel;
-
-	/* atmelwlandriver differs between scan type 0 and 1 (active/passive)
-	   For ad-hoc mode, it uses type 0 only. */
-	scan.scan_type = priv->scan_mode;
-
-	/* INFO: For probe_delay, not multiplying by 1024 as this will be
-	   slightly less than min_channel_time
-	   (per spec: probe delay < min. channel time) */
-	scan.min_channel_time = cpu_to_le16(priv->scan_min_time);
-	scan.max_channel_time = cpu_to_le16(priv->scan_max_time);
-	scan.probe_delay = cpu_to_le16(priv->scan_min_time * 1000);
-	scan.international_scan = 0;
-
-	/* other values are set to 0 for type 0 */
-
-	at76_dbg(DBG_PROGRESS, "%s: start_scan (use_essid = %d, intl = %d, "
-		 "channel = %d, probe_delay = %d, scan_min_time = %d, "
-		 "scan_max_time = %d)",
-		 priv->netdev->name, use_essid,
-		 scan.international_scan, scan.channel,
-		 le16_to_cpu(scan.probe_delay),
-		 le16_to_cpu(scan.min_channel_time),
-		 le16_to_cpu(scan.max_channel_time));
-
-	return at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan));
-}
-
-/* Enable monitor mode */
-static int at76_start_monitor(struct at76_priv *priv)
-{
-	struct at76_req_scan scan;
-	int ret;
-
-	memset(&scan, 0, sizeof(struct at76_req_scan));
-	memset(scan.bssid, 0xff, ETH_ALEN);
-
-	scan.channel = priv->channel;
-	scan.scan_type = SCAN_TYPE_PASSIVE;
-	scan.international_scan = 0;
-
-	ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan));
-	if (ret >= 0)
-		ret = at76_get_cmd_status(priv->udev, CMD_SCAN);
-
-	return ret;
-}
-
-static int at76_start_ibss(struct at76_priv *priv)
-{
-	struct at76_req_ibss bss;
-	int ret;
-
-	WARN_ON(priv->mac_state != MAC_OWN_IBSS);
-	if (priv->mac_state != MAC_OWN_IBSS)
-		return -EBUSY;
-
-	memset(&bss, 0, sizeof(struct at76_req_ibss));
-	memset(bss.bssid, 0xff, ETH_ALEN);
-	memcpy(bss.essid, priv->essid, IW_ESSID_MAX_SIZE);
-	bss.essid_size = priv->essid_size;
-	bss.bss_type = ADHOC_MODE;
-	bss.channel = priv->channel;
-
-	ret = at76_set_card_command(priv->udev, CMD_START_IBSS, &bss,
-				    sizeof(struct at76_req_ibss));
-	if (ret < 0) {
-		printk(KERN_ERR "%s: start_ibss failed: %d\n",
-		       priv->netdev->name, ret);
-		return ret;
-	}
-
-	ret = at76_wait_completion(priv, CMD_START_IBSS);
-	if (ret != CMD_STATUS_COMPLETE) {
-		printk(KERN_ERR "%s: start_ibss failed to complete, %d\n",
-		       priv->netdev->name, ret);
-		return ret;
-	}
-
-	ret = at76_get_current_bssid(priv);
-	if (ret < 0)
-		return ret;
-
-	ret = at76_get_current_channel(priv);
-	if (ret < 0)
-		return ret;
-
-	/* not sure what this is good for ??? */
-	priv->mib_buf.type = MIB_MAC_MGMT;
-	priv->mib_buf.size = 1;
-	priv->mib_buf.index = offsetof(struct mib_mac_mgmt, ibss_change);
-	priv->mib_buf.data.byte = 0;
-
-	ret = at76_set_mib(priv, &priv->mib_buf);
-	if (ret < 0) {
-		printk(KERN_ERR "%s: set_mib (ibss change ok) failed: %d\n",
-		       priv->netdev->name, ret);
-		return ret;
-	}
-
-	netif_carrier_on(priv->netdev);
-	netif_start_queue(priv->netdev);
-	return 0;
-}
-
-/* Request card to join BSS in managed or ad-hoc mode */
-static int at76_join_bss(struct at76_priv *priv, struct bss_info *ptr)
-{
-	struct at76_req_join join;
-
-	BUG_ON(!ptr);
-
-	memset(&join, 0, sizeof(struct at76_req_join));
-	memcpy(join.bssid, ptr->bssid, ETH_ALEN);
-	memcpy(join.essid, ptr->ssid, ptr->ssid_len);
-	join.essid_size = ptr->ssid_len;
-	join.bss_type = (priv->iw_mode == IW_MODE_ADHOC ? 1 : 2);
-	join.channel = ptr->channel;
-	join.timeout = cpu_to_le16(2000);
-
-	at76_dbg(DBG_PROGRESS,
-		 "%s join addr %pM ssid %s stype %d ch %d timeout %d",
-		 priv->netdev->name, join.bssid, join.essid,
-		 join.bss_type, join.channel, le16_to_cpu(join.timeout));
-	return at76_set_card_command(priv->udev, CMD_JOIN, &join,
-				     sizeof(struct at76_req_join));
-}
-
-/* Calculate padding from txbuf->wlength (which excludes the USB TX header),
-   likely to compensate a flaw in the AT76C503A USB part ... */
-static inline int at76_calc_padding(int wlen)
-{
-	/* add the USB TX header */
-	wlen += AT76_TX_HDRLEN;
-
-	wlen = wlen % 64;
-
-	if (wlen < 50)
-		return 50 - wlen;
-
-	if (wlen >= 61)
-		return 64 + 50 - wlen;
-
-	return 0;
-}
-
-/* We are doing a lot of things here in an interrupt. Need
-   a bh handler (Watching TV with a TV card is probably
-   a good test: if you see flickers, we are doing too much.
-   Currently I do see flickers... even with our tasklet :-( )
-   Maybe because the bttv driver and usb-uhci use the same interrupt
-*/
-/* Or maybe because our BH handler is preempting bttv's BH handler.. BHs don't
- * solve everything.. (alex) */
-static void at76_rx_callback(struct urb *urb)
-{
-	struct at76_priv *priv = urb->context;
-
-	priv->rx_tasklet.data = (unsigned long)urb;
-	tasklet_schedule(&priv->rx_tasklet);
-	return;
-}
-
-static void at76_tx_callback(struct urb *urb)
-{
-	struct at76_priv *priv = urb->context;
-	struct net_device_stats *stats = &priv->stats;
-	unsigned long flags;
-	struct at76_tx_buffer *mgmt_buf;
-	int ret;
-
-	switch (urb->status) {
-	case 0:
-		stats->tx_packets++;
-		break;
-	case -ENOENT:
-	case -ECONNRESET:
-		/* urb has been unlinked */
-		return;
-	default:
-		at76_dbg(DBG_URB, "%s - nonzero tx status received: %d",
-			 __func__, urb->status);
-		stats->tx_errors++;
-		break;
-	}
-
-	spin_lock_irqsave(&priv->mgmt_spinlock, flags);
-	mgmt_buf = priv->next_mgmt_bulk;
-	priv->next_mgmt_bulk = NULL;
-	spin_unlock_irqrestore(&priv->mgmt_spinlock, flags);
-
-	if (!mgmt_buf) {
-		netif_wake_queue(priv->netdev);
-		return;
-	}
-
-	/* we don't copy the padding bytes, but add them
-	   to the length */
-	memcpy(priv->bulk_out_buffer, mgmt_buf,
-	       le16_to_cpu(mgmt_buf->wlength) + AT76_TX_HDRLEN);
-	usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe,
-			  priv->bulk_out_buffer,
-			  le16_to_cpu(mgmt_buf->wlength) + mgmt_buf->padding +
-			  AT76_TX_HDRLEN, at76_tx_callback, priv);
-	ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC);
-	if (ret)
-		printk(KERN_ERR "%s: error in tx submit urb: %d\n",
-		       priv->netdev->name, ret);
-
-	kfree(mgmt_buf);
-}
-
-/* Send a management frame on bulk-out.  txbuf->wlength must be set */
-static int at76_tx_mgmt(struct at76_priv *priv, struct at76_tx_buffer *txbuf)
-{
-	unsigned long flags;
-	int ret;
-	int urb_status;
-	void *oldbuf = NULL;
-
-	netif_carrier_off(priv->netdev);	/* stop netdev watchdog */
-	netif_stop_queue(priv->netdev);	/* stop tx data packets */
-
-	spin_lock_irqsave(&priv->mgmt_spinlock, flags);
-
-	urb_status = priv->tx_urb->status;
-	if (urb_status == -EINPROGRESS) {
-		/* cannot transmit now, put in the queue */
-		oldbuf = priv->next_mgmt_bulk;
-		priv->next_mgmt_bulk = txbuf;
-	}
-	spin_unlock_irqrestore(&priv->mgmt_spinlock, flags);
-
-	if (oldbuf) {
-		/* a data/mgmt tx is already pending in the URB -
-		   if this is no error in some situations we must
-		   implement a queue or silently modify the old msg */
-		printk(KERN_ERR "%s: removed pending mgmt buffer %s\n",
-		       priv->netdev->name, hex2str(oldbuf, 64));
-		kfree(oldbuf);
-		return 0;
-	}
-
-	txbuf->tx_rate = TX_RATE_1MBIT;
-	txbuf->padding = at76_calc_padding(le16_to_cpu(txbuf->wlength));
-	memset(txbuf->reserved, 0, sizeof(txbuf->reserved));
-
-	if (priv->next_mgmt_bulk)
-		printk(KERN_ERR "%s: URB status %d, but mgmt is pending\n",
-		       priv->netdev->name, urb_status);
-
-	at76_dbg(DBG_TX_MGMT,
-		 "%s: tx mgmt: wlen %d tx_rate %d pad %d %s",
-		 priv->netdev->name, le16_to_cpu(txbuf->wlength),
-		 txbuf->tx_rate, txbuf->padding,
-		 hex2str(txbuf->packet, le16_to_cpu(txbuf->wlength)));
-
-	/* txbuf was not consumed above -> send mgmt msg immediately */
-	memcpy(priv->bulk_out_buffer, txbuf,
-	       le16_to_cpu(txbuf->wlength) + AT76_TX_HDRLEN);
-	usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe,
-			  priv->bulk_out_buffer,
-			  le16_to_cpu(txbuf->wlength) + txbuf->padding +
-			  AT76_TX_HDRLEN, at76_tx_callback, priv);
-	ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC);
-	if (ret)
-		printk(KERN_ERR "%s: error in tx submit urb: %d\n",
-		       priv->netdev->name, ret);
-
-	kfree(txbuf);
-
-	return ret;
-}
-
-/* Go to the next information element */
-static inline void next_ie(struct ieee80211_info_element **ie)
-{
-	*ie = (struct ieee80211_info_element *)(&(*ie)->data[(*ie)->len]);
-}
-
-/* Challenge is the challenge string (in TLV format)
-   we got with seq_nr 2 for shared secret authentication only and
-   send in seq_nr 3 WEP encrypted to prove we have the correct WEP key;
-   otherwise it is NULL */
-static int at76_auth_req(struct at76_priv *priv, struct bss_info *bss,
-			 int seq_nr, struct ieee80211_info_element *challenge)
-{
-	struct at76_tx_buffer *tx_buffer;
-	struct ieee80211_hdr_3addr *mgmt;
-	struct ieee80211_auth *req;
-	int buf_len = (seq_nr != 3 ? AUTH_FRAME_SIZE :
-		       AUTH_FRAME_SIZE + 1 + 1 + challenge->len);
-
-	BUG_ON(!bss);
-	BUG_ON(seq_nr == 3 && !challenge);
-	tx_buffer = kmalloc(buf_len + MAX_PADDING_SIZE, GFP_ATOMIC);
-	if (!tx_buffer)
-		return -ENOMEM;
-
-	req = (struct ieee80211_auth *)tx_buffer->packet;
-	mgmt = &req->header;
-
-	/* make wireless header */
-	/* first auth msg is not encrypted, only the second (seq_nr == 3) */
-	mgmt->frame_ctl =
-	    cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_AUTH |
-			(seq_nr == 3 ? IEEE80211_FCTL_PROTECTED : 0));
-
-	mgmt->duration_id = cpu_to_le16(0x8000);
-	memcpy(mgmt->addr1, bss->bssid, ETH_ALEN);
-	memcpy(mgmt->addr2, priv->netdev->dev_addr, ETH_ALEN);
-	memcpy(mgmt->addr3, bss->bssid, ETH_ALEN);
-	mgmt->seq_ctl = cpu_to_le16(0);
-
-	req->algorithm = cpu_to_le16(priv->auth_mode);
-	req->transaction = cpu_to_le16(seq_nr);
-	req->status = cpu_to_le16(0);
-
-	if (seq_nr == 3)
-		memcpy(req->info_element, challenge, 1 + 1 + challenge->len);
-
-	/* init. at76_priv tx header */
-	tx_buffer->wlength = cpu_to_le16(buf_len - AT76_TX_HDRLEN);
-	at76_dbg(DBG_TX_MGMT, "%s: AuthReq bssid %pM alg %d seq_nr %d",
-		 priv->netdev->name, mgmt->addr3,
-		 le16_to_cpu(req->algorithm), le16_to_cpu(req->transaction));
-	if (seq_nr == 3)
-		at76_dbg(DBG_TX_MGMT, "%s: AuthReq challenge: %s ...",
-			 priv->netdev->name, hex2str(req->info_element, 18));
-
-	/* either send immediately (if no data tx is pending
-	   or put it in pending list */
-	return at76_tx_mgmt(priv, tx_buffer);
-}
-
-static int at76_assoc_req(struct at76_priv *priv, struct bss_info *bss)
-{
-	struct at76_tx_buffer *tx_buffer;
-	struct ieee80211_hdr_3addr *mgmt;
-	struct ieee80211_assoc_request *req;
-	struct ieee80211_info_element *ie;
-	char *essid;
-	int essid_len;
-	u16 capa;
-
-	BUG_ON(!bss);
-
-	tx_buffer = kmalloc(ASSOCREQ_MAX_SIZE + MAX_PADDING_SIZE, GFP_ATOMIC);
-	if (!tx_buffer)
-		return -ENOMEM;
-
-	req = (struct ieee80211_assoc_request *)tx_buffer->packet;
-	mgmt = &req->header;
-	ie = req->info_element;
-
-	/* make wireless header */
-	mgmt->frame_ctl = cpu_to_le16(IEEE80211_FTYPE_MGMT |
-				      IEEE80211_STYPE_ASSOC_REQ);
-
-	mgmt->duration_id = cpu_to_le16(0x8000);
-	memcpy(mgmt->addr1, bss->bssid, ETH_ALEN);
-	memcpy(mgmt->addr2, priv->netdev->dev_addr, ETH_ALEN);
-	memcpy(mgmt->addr3, bss->bssid, ETH_ALEN);
-	mgmt->seq_ctl = cpu_to_le16(0);
-
-	/* we must set the Privacy bit in the capabilities to assure an
-	   Agere-based AP with optional WEP transmits encrypted frames
-	   to us.  AP only set the Privacy bit in their capabilities
-	   if WEP is mandatory in the BSS! */
-	capa = bss->capa;
-	if (priv->wep_enabled)
-		capa |= WLAN_CAPABILITY_PRIVACY;
-	if (priv->preamble_type != PREAMBLE_TYPE_LONG)
-		capa |= WLAN_CAPABILITY_SHORT_PREAMBLE;
-	req->capability = cpu_to_le16(capa);
-
-	req->listen_interval = cpu_to_le16(2 * bss->beacon_interval);
-
-	/* write TLV data elements */
-
-	ie->id = WLAN_EID_SSID;
-	ie->len = bss->ssid_len;
-	memcpy(ie->data, bss->ssid, bss->ssid_len);
-	next_ie(&ie);
-
-	ie->id = WLAN_EID_SUPP_RATES;
-	ie->len = sizeof(hw_rates);
-	memcpy(ie->data, hw_rates, sizeof(hw_rates));
-	next_ie(&ie);		/* ie points behind the supp_rates field */
-
-	/* init. at76_priv tx header */
-	tx_buffer->wlength = cpu_to_le16((u8 *)ie - (u8 *)mgmt);
-
-	ie = req->info_element;
-	essid = ie->data;
-	essid_len = min_t(int, IW_ESSID_MAX_SIZE, ie->len);
-
-	next_ie(&ie);		/* points to IE of rates now */
-	at76_dbg(DBG_TX_MGMT,
-		 "%s: AssocReq bssid %pM capa 0x%04x ssid %.*s rates %s",
-		 priv->netdev->name, mgmt->addr3,
-		 le16_to_cpu(req->capability), essid_len, essid,
-		 hex2str(ie->data, ie->len));
-
-	/* either send immediately (if no data tx is pending
-	   or put it in pending list */
-	return at76_tx_mgmt(priv, tx_buffer);
-}
-
-/* We got to check the bss_list for old entries */
-static void at76_bss_list_timeout(unsigned long par)
-{
-	struct at76_priv *priv = (struct at76_priv *)par;
-	unsigned long flags;
-	struct list_head *lptr, *nptr;
-	struct bss_info *ptr;
-
-	spin_lock_irqsave(&priv->bss_list_spinlock, flags);
-
-	list_for_each_safe(lptr, nptr, &priv->bss_list) {
-
-		ptr = list_entry(lptr, struct bss_info, list);
-
-		if (ptr != priv->curr_bss
-		    && time_after(jiffies, ptr->last_rx + BSS_LIST_TIMEOUT)) {
-			at76_dbg(DBG_BSS_TABLE_RM,
-				 "%s: bss_list: removing old BSS %pM ch %d",
-				 priv->netdev->name, ptr->bssid,
-				 ptr->channel);
-			list_del(&ptr->list);
-			kfree(ptr);
-		}
-	}
-	spin_unlock_irqrestore(&priv->bss_list_spinlock, flags);
-	/* restart the timer */
-	mod_timer(&priv->bss_list_timer, jiffies + BSS_LIST_TIMEOUT);
-}
-
-static inline void at76_set_mac_state(struct at76_priv *priv,
-				      enum mac_state mac_state)
-{
-	at76_dbg(DBG_MAC_STATE, "%s state: %s", priv->netdev->name,
-		 mac_states[mac_state]);
-	priv->mac_state = mac_state;
-}
-
-static void at76_dump_bss_table(struct at76_priv *priv)
-{
-	struct bss_info *ptr;
-	unsigned long flags;
-	struct list_head *lptr;
-
-	spin_lock_irqsave(&priv->bss_list_spinlock, flags);
-
-	at76_dbg(DBG_BSS_TABLE, "%s BSS table (curr=%p):", priv->netdev->name,
-		 priv->curr_bss);
-
-	list_for_each(lptr, &priv->bss_list) {
-		ptr = list_entry(lptr, struct bss_info, list);
-		at76_dbg(DBG_BSS_TABLE, "0x%p: bssid %pM channel %d ssid %.*s "
-			 "(%s) capa 0x%04x rates %s rssi %d link %d noise %d",
-			 ptr, ptr->bssid, ptr->channel, ptr->ssid_len,
-			 ptr->ssid, hex2str(ptr->ssid, ptr->ssid_len),
-			 ptr->capa, hex2str(ptr->rates, ptr->rates_len),
-			 ptr->rssi, ptr->link_qual, ptr->noise_level);
-	}
-	spin_unlock_irqrestore(&priv->bss_list_spinlock, flags);
-}
-
-/* Called upon successful association to mark interface as connected */
-static void at76_work_assoc_done(struct work_struct *work)
-{
-	struct at76_priv *priv = container_of(work, struct at76_priv,
-					      work_assoc_done);
-
-	mutex_lock(&priv->mtx);
-
-	WARN_ON(priv->mac_state != MAC_ASSOC);
-	WARN_ON(!priv->curr_bss);
-	if (priv->mac_state != MAC_ASSOC || !priv->curr_bss)
-		goto exit;
-
-	if (priv->iw_mode == IW_MODE_INFRA) {
-		if (priv->pm_mode != AT76_PM_OFF) {
-			/* calculate the listen interval in units of
-			   beacon intervals of the curr_bss */
-			u32 pm_period_beacon = (priv->pm_period >> 10) /
-			    priv->curr_bss->beacon_interval;
-
-			pm_period_beacon = max(pm_period_beacon, 2u);
-			pm_period_beacon = min(pm_period_beacon, 0xffffu);
-
-			at76_dbg(DBG_PM,
-				 "%s: pm_mode %d assoc id 0x%x listen int %d",
-				 priv->netdev->name, priv->pm_mode,
-				 priv->assoc_id, pm_period_beacon);
-
-			at76_set_associd(priv, priv->assoc_id);
-			at76_set_listen_interval(priv, (u16)pm_period_beacon);
-		}
-		schedule_delayed_work(&priv->dwork_beacon, BEACON_TIMEOUT);
-	}
-	at76_set_pm_mode(priv);
-
-	netif_carrier_on(priv->netdev);
-	netif_wake_queue(priv->netdev);
-	at76_set_mac_state(priv, MAC_CONNECTED);
-	at76_iwevent_bss_connect(priv->netdev, priv->curr_bss->bssid);
-	at76_dbg(DBG_PROGRESS, "%s: connected to BSSID %pM",
-		 priv->netdev->name, priv->curr_bss->bssid);
-
-exit:
-	mutex_unlock(&priv->mtx);
-}
-
-/* We only store the new mac address in netdev struct,
-   it gets set when the netdev is opened. */
-static int at76_set_mac_address(struct net_device *netdev, void *addr)
-{
-	struct sockaddr *mac = addr;
-	memcpy(netdev->dev_addr, mac->sa_data, ETH_ALEN);
-	return 1;
-}
-
-static struct net_device_stats *at76_get_stats(struct net_device *netdev)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	return &priv->stats;
-}
-
-static struct iw_statistics *at76_get_wireless_stats(struct net_device *netdev)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-
-	at76_dbg(DBG_IOCTL, "RETURN qual %d level %d noise %d updated %d",
-		 priv->wstats.qual.qual, priv->wstats.qual.level,
-		 priv->wstats.qual.noise, priv->wstats.qual.updated);
-
-	return &priv->wstats;
-}
-
-static void at76_set_multicast(struct net_device *netdev)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int promisc;
-
-	promisc = ((netdev->flags & IFF_PROMISC) != 0);
-	if (promisc != priv->promisc) {
-		/* This gets called in interrupt, must reschedule */
-		priv->promisc = promisc;
-		schedule_work(&priv->work_set_promisc);
-	}
-}
-
-/* Stop all network activity, flush all pending tasks */
-static void at76_quiesce(struct at76_priv *priv)
-{
-	unsigned long flags;
-
-	netif_stop_queue(priv->netdev);
-	netif_carrier_off(priv->netdev);
-
-	at76_set_mac_state(priv, MAC_INIT);
-
-	cancel_delayed_work(&priv->dwork_get_scan);
-	cancel_delayed_work(&priv->dwork_beacon);
-	cancel_delayed_work(&priv->dwork_auth);
-	cancel_delayed_work(&priv->dwork_assoc);
-	cancel_delayed_work(&priv->dwork_restart);
-
-	spin_lock_irqsave(&priv->mgmt_spinlock, flags);
-	kfree(priv->next_mgmt_bulk);
-	priv->next_mgmt_bulk = NULL;
-	spin_unlock_irqrestore(&priv->mgmt_spinlock, flags);
-}
-
-/*******************************************************************************
- * at76_priv implementations of iw_handler functions:
- */
-static int at76_iw_handler_commit(struct net_device *netdev,
-				  struct iw_request_info *info,
-				  void *null, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-
-	at76_dbg(DBG_IOCTL, "%s %s: restarting the device", netdev->name,
-		 __func__);
-
-	if (priv->mac_state != MAC_INIT)
-		at76_quiesce(priv);
-
-	/* Wait half second before the restart to process subsequent
-	 * requests from the same iwconfig in a single restart */
-	schedule_delayed_work(&priv->dwork_restart, HZ / 2);
-
-	return 0;
-}
-
-static int at76_iw_handler_get_name(struct net_device *netdev,
-				    struct iw_request_info *info,
-				    char *name, char *extra)
-{
-	strcpy(name, "IEEE 802.11b");
-	at76_dbg(DBG_IOCTL, "%s: SIOCGIWNAME - name %s", netdev->name, name);
-	return 0;
-}
-
-static int at76_iw_handler_set_freq(struct net_device *netdev,
-				    struct iw_request_info *info,
-				    struct iw_freq *freq, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int chan = -1;
-	int ret = -EIWCOMMIT;
-	at76_dbg(DBG_IOCTL, "%s: SIOCSIWFREQ - freq.m %d freq.e %d",
-		 netdev->name, freq->m, freq->e);
-
-	if ((freq->e == 0) && (freq->m <= 1000))
-		/* Setting by channel number */
-		chan = freq->m;
-	else {
-		/* Setting by frequency - search the table */
-		int mult = 1;
-		int i;
-
-		for (i = 0; i < (6 - freq->e); i++)
-			mult *= 10;
-
-		for (i = 0; i < NUM_CHANNELS; i++) {
-			if (freq->m == (channel_frequency[i] * mult))
-				chan = i + 1;
-		}
-	}
-
-	if (chan < 1 || !priv->domain)
-		/* non-positive channels are invalid
-		 * we need a domain info to set the channel
-		 * either that or an invalid frequency was
-		 * provided by the user */
-		ret = -EINVAL;
-	else if (!(priv->domain->channel_map & (1 << (chan - 1)))) {
-		printk(KERN_INFO "%s: channel %d not allowed for domain %s\n",
-		       priv->netdev->name, chan, priv->domain->name);
-		ret = -EINVAL;
-	}
-
-	if (ret == -EIWCOMMIT) {
-		priv->channel = chan;
-		at76_dbg(DBG_IOCTL, "%s: SIOCSIWFREQ - ch %d", netdev->name,
-			 chan);
-	}
-
-	return ret;
-}
-
-static int at76_iw_handler_get_freq(struct net_device *netdev,
-				    struct iw_request_info *info,
-				    struct iw_freq *freq, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-
-	freq->m = priv->channel;
-	freq->e = 0;
-
-	if (priv->channel)
-		at76_dbg(DBG_IOCTL, "%s: SIOCGIWFREQ - freq %ld x 10e%d",
-			 netdev->name, channel_frequency[priv->channel - 1], 6);
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCGIWFREQ - ch %d", netdev->name,
-		 priv->channel);
-
-	return 0;
-}
-
-static int at76_iw_handler_set_mode(struct net_device *netdev,
-				    struct iw_request_info *info,
-				    __u32 *mode, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCSIWMODE - %d", netdev->name, *mode);
-
-	if ((*mode != IW_MODE_ADHOC) && (*mode != IW_MODE_INFRA) &&
-	    (*mode != IW_MODE_MONITOR))
-		return -EINVAL;
-
-	priv->iw_mode = *mode;
-	if (priv->iw_mode != IW_MODE_INFRA)
-		priv->pm_mode = AT76_PM_OFF;
-
-	return -EIWCOMMIT;
-}
-
-static int at76_iw_handler_get_mode(struct net_device *netdev,
-				    struct iw_request_info *info,
-				    __u32 *mode, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-
-	*mode = priv->iw_mode;
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCGIWMODE - %d", netdev->name, *mode);
-
-	return 0;
-}
-
-static int at76_iw_handler_get_range(struct net_device *netdev,
-				     struct iw_request_info *info,
-				     struct iw_point *data, char *extra)
-{
-	/* inspired by atmel.c */
-	struct at76_priv *priv = netdev_priv(netdev);
-	struct iw_range *range = (struct iw_range *)extra;
-	int i;
-
-	data->length = sizeof(struct iw_range);
-	memset(range, 0, sizeof(struct iw_range));
-
-	/* TODO: range->throughput = xxxxxx; */
-
-	range->min_nwid = 0x0000;
-	range->max_nwid = 0x0000;
-
-	/* this driver doesn't maintain sensitivity information */
-	range->sensitivity = 0;
-
-	range->max_qual.qual = 100;
-	range->max_qual.level = 100;
-	range->max_qual.noise = 0;
-	range->max_qual.updated = IW_QUAL_NOISE_INVALID;
-
-	range->avg_qual.qual = 50;
-	range->avg_qual.level = 50;
-	range->avg_qual.noise = 0;
-	range->avg_qual.updated = IW_QUAL_NOISE_INVALID;
-
-	range->bitrate[0] = 1000000;
-	range->bitrate[1] = 2000000;
-	range->bitrate[2] = 5500000;
-	range->bitrate[3] = 11000000;
-	range->num_bitrates = 4;
-
-	range->min_rts = 0;
-	range->max_rts = MAX_RTS_THRESHOLD;
-
-	range->min_frag = MIN_FRAG_THRESHOLD;
-	range->max_frag = MAX_FRAG_THRESHOLD;
-
-	range->pmp_flags = IW_POWER_PERIOD;
-	range->pmt_flags = IW_POWER_ON;
-	range->pm_capa = IW_POWER_PERIOD | IW_POWER_ALL_R;
-
-	range->encoding_size[0] = WEP_SMALL_KEY_LEN;
-	range->encoding_size[1] = WEP_LARGE_KEY_LEN;
-	range->num_encoding_sizes = 2;
-	range->max_encoding_tokens = WEP_KEYS;
-
-	/* both WL-240U and Linksys WUSB11 v2.6 specify 15 dBm as output power
-	   - take this for all (ignore antenna gains) */
-	range->txpower[0] = 15;
-	range->num_txpower = 1;
-	range->txpower_capa = IW_TXPOW_DBM;
-
-	range->we_version_source = WIRELESS_EXT;
-	range->we_version_compiled = WIRELESS_EXT;
-
-	/* same as the values used in atmel.c */
-	range->retry_capa = IW_RETRY_LIMIT;
-	range->retry_flags = IW_RETRY_LIMIT;
-	range->r_time_flags = 0;
-	range->min_retry = 1;
-	range->max_retry = 255;
-
-	range->num_channels = NUM_CHANNELS;
-	range->num_frequency = 0;
-
-	for (i = 0; i < NUM_CHANNELS; i++) {
-		/* test if channel map bit is raised */
-		if (priv->domain->channel_map & (0x1 << i)) {
-			range->num_frequency += 1;
-
-			range->freq[i].i = i + 1;
-			range->freq[i].m = channel_frequency[i] * 100000;
-			range->freq[i].e = 1;	/* freq * 10^1 */
-		}
-	}
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCGIWRANGE", netdev->name);
-
-	return 0;
-}
-
-static int at76_iw_handler_set_spy(struct net_device *netdev,
-				   struct iw_request_info *info,
-				   struct iw_point *data, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int ret = 0;
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCSIWSPY - number of addresses %d",
-		 netdev->name, data->length);
-
-	spin_lock_bh(&priv->spy_spinlock);
-	ret = iw_handler_set_spy(priv->netdev, info, (union iwreq_data *)data,
-				 extra);
-	spin_unlock_bh(&priv->spy_spinlock);
-
-	return ret;
-}
-
-static int at76_iw_handler_get_spy(struct net_device *netdev,
-				   struct iw_request_info *info,
-				   struct iw_point *data, char *extra)
-{
-
-	struct at76_priv *priv = netdev_priv(netdev);
-	int ret = 0;
-
-	spin_lock_bh(&priv->spy_spinlock);
-	ret = iw_handler_get_spy(priv->netdev, info,
-				 (union iwreq_data *)data, extra);
-	spin_unlock_bh(&priv->spy_spinlock);
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCGIWSPY - number of addresses %d",
-		 netdev->name, data->length);
-
-	return ret;
-}
-
-static int at76_iw_handler_set_thrspy(struct net_device *netdev,
-				      struct iw_request_info *info,
-				      struct iw_point *data, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int ret;
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCSIWTHRSPY - number of addresses %d)",
-		 netdev->name, data->length);
-
-	spin_lock_bh(&priv->spy_spinlock);
-	ret = iw_handler_set_thrspy(netdev, info, (union iwreq_data *)data,
-				    extra);
-	spin_unlock_bh(&priv->spy_spinlock);
-
-	return ret;
-}
-
-static int at76_iw_handler_get_thrspy(struct net_device *netdev,
-				      struct iw_request_info *info,
-				      struct iw_point *data, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int ret;
-
-	spin_lock_bh(&priv->spy_spinlock);
-	ret = iw_handler_get_thrspy(netdev, info, (union iwreq_data *)data,
-				    extra);
-	spin_unlock_bh(&priv->spy_spinlock);
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCGIWTHRSPY - number of addresses %d)",
-		 netdev->name, data->length);
-
-	return ret;
-}
-
-static int at76_iw_handler_set_wap(struct net_device *netdev,
-				   struct iw_request_info *info,
-				   struct sockaddr *ap_addr, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCSIWAP - wap/bssid %pM", netdev->name,
-		 ap_addr->sa_data);
-
-	/* if the incoming address == ff:ff:ff:ff:ff:ff, the user has
-	   chosen any or auto AP preference */
-	if (is_broadcast_ether_addr(ap_addr->sa_data)
-	    || is_zero_ether_addr(ap_addr->sa_data))
-		priv->wanted_bssid_valid = 0;
-	else {
-		/* user wants to set a preferred AP address */
-		priv->wanted_bssid_valid = 1;
-		memcpy(priv->wanted_bssid, ap_addr->sa_data, ETH_ALEN);
-	}
-
-	return -EIWCOMMIT;
-}
-
-static int at76_iw_handler_get_wap(struct net_device *netdev,
-				   struct iw_request_info *info,
-				   struct sockaddr *ap_addr, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-
-	ap_addr->sa_family = ARPHRD_ETHER;
-	memcpy(ap_addr->sa_data, priv->bssid, ETH_ALEN);
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCGIWAP - wap/bssid %pM", netdev->name,
-		 ap_addr->sa_data);
-
-	return 0;
-}
-
-static int at76_iw_handler_set_scan(struct net_device *netdev,
-				    struct iw_request_info *info,
-				    union iwreq_data *wrqu, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int ret = 0;
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCSIWSCAN", netdev->name);
-
-	if (mutex_lock_interruptible(&priv->mtx))
-		return -EINTR;
-
-	if (!netif_running(netdev)) {
-		ret = -ENETDOWN;
-		goto exit;
-	}
-
-	/* jal: we don't allow "iwlist ethX scan" while we are
-	   in monitor mode */
-	if (priv->iw_mode == IW_MODE_MONITOR) {
-		ret = -EBUSY;
-		goto exit;
-	}
-
-	/* Discard old scan results */
-	if ((jiffies - priv->last_scan) > (20 * HZ))
-		priv->scan_state = SCAN_IDLE;
-	priv->last_scan = jiffies;
-
-	/* Initiate a scan command */
-	if (priv->scan_state == SCAN_IN_PROGRESS) {
-		ret = -EBUSY;
-		goto exit;
-	}
-
-	priv->scan_state = SCAN_IN_PROGRESS;
-
-	at76_quiesce(priv);
-
-	/* Try to do passive or active scan if WE asks as. */
-	if (wrqu->data.length
-	    && wrqu->data.length == sizeof(struct iw_scan_req)) {
-		struct iw_scan_req *req = (struct iw_scan_req *)extra;
-
-		if (req->scan_type == IW_SCAN_TYPE_PASSIVE)
-			priv->scan_mode = SCAN_TYPE_PASSIVE;
-		else if (req->scan_type == IW_SCAN_TYPE_ACTIVE)
-			priv->scan_mode = SCAN_TYPE_ACTIVE;
-
-		/* Sanity check values? */
-		if (req->min_channel_time > 0)
-			priv->scan_min_time = req->min_channel_time;
-
-		if (req->max_channel_time > 0)
-			priv->scan_max_time = req->max_channel_time;
-	}
-
-	/* change to scanning state */
-	at76_set_mac_state(priv, MAC_SCANNING);
-	schedule_work(&priv->work_start_scan);
-
-exit:
-	mutex_unlock(&priv->mtx);
-	return ret;
-}
-
-static int at76_iw_handler_get_scan(struct net_device *netdev,
-				    struct iw_request_info *info,
-				    struct iw_point *data, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	unsigned long flags;
-	struct list_head *lptr, *nptr;
-	struct bss_info *curr_bss;
-	struct iw_event *iwe = kmalloc(sizeof(struct iw_event), GFP_KERNEL);
-	char *curr_val, *curr_pos = extra;
-	int i;
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCGIWSCAN", netdev->name);
-
-	if (!iwe)
-		return -ENOMEM;
-
-	if (priv->scan_state != SCAN_COMPLETED) {
-		/* scan not yet finished */
-		kfree(iwe);
-		return -EAGAIN;
-	}
-
-	spin_lock_irqsave(&priv->bss_list_spinlock, flags);
-
-	list_for_each_safe(lptr, nptr, &priv->bss_list) {
-		curr_bss = list_entry(lptr, struct bss_info, list);
-
-		iwe->cmd = SIOCGIWAP;
-		iwe->u.ap_addr.sa_family = ARPHRD_ETHER;
-		memcpy(iwe->u.ap_addr.sa_data, curr_bss->bssid, 6);
-		curr_pos = iwe_stream_add_event(info, curr_pos,
-						extra + IW_SCAN_MAX_DATA, iwe,
-						IW_EV_ADDR_LEN);
-
-		iwe->u.data.length = curr_bss->ssid_len;
-		iwe->cmd = SIOCGIWESSID;
-		iwe->u.data.flags = 1;
-
-		curr_pos = iwe_stream_add_point(info, curr_pos,
-						extra + IW_SCAN_MAX_DATA, iwe,
-						curr_bss->ssid);
-
-		iwe->cmd = SIOCGIWMODE;
-		iwe->u.mode = (curr_bss->capa & WLAN_CAPABILITY_IBSS) ?
-		    IW_MODE_ADHOC :
-		    (curr_bss->capa & WLAN_CAPABILITY_ESS) ?
-		    IW_MODE_MASTER : IW_MODE_AUTO;
-		/* IW_MODE_AUTO = 0 which I thought is
-		 * the most logical value to return in this case */
-		curr_pos = iwe_stream_add_event(info, curr_pos,
-						extra + IW_SCAN_MAX_DATA, iwe,
-						IW_EV_UINT_LEN);
-
-		iwe->cmd = SIOCGIWFREQ;
-		iwe->u.freq.m = curr_bss->channel;
-		iwe->u.freq.e = 0;
-		curr_pos = iwe_stream_add_event(info, curr_pos,
-						extra + IW_SCAN_MAX_DATA, iwe,
-						IW_EV_FREQ_LEN);
-
-		iwe->cmd = SIOCGIWENCODE;
-		if (curr_bss->capa & WLAN_CAPABILITY_PRIVACY)
-			iwe->u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
-		else
-			iwe->u.data.flags = IW_ENCODE_DISABLED;
-
-		iwe->u.data.length = 0;
-		curr_pos = iwe_stream_add_point(info, curr_pos,
-						extra + IW_SCAN_MAX_DATA, iwe,
-						NULL);
-
-		/* Add quality statistics */
-		iwe->cmd = IWEVQUAL;
-		iwe->u.qual.noise = 0;
-		iwe->u.qual.updated =
-		    IW_QUAL_NOISE_INVALID | IW_QUAL_LEVEL_UPDATED;
-		iwe->u.qual.level = (curr_bss->rssi * 100 / 42);
-		if (iwe->u.qual.level > 100)
-			iwe->u.qual.level = 100;
-		if (at76_is_intersil(priv->board_type))
-			iwe->u.qual.qual = curr_bss->link_qual;
-		else {
-			iwe->u.qual.qual = 0;
-			iwe->u.qual.updated |= IW_QUAL_QUAL_INVALID;
-		}
-		/* Add new value to event */
-		curr_pos = iwe_stream_add_event(info, curr_pos,
-						extra + IW_SCAN_MAX_DATA, iwe,
-						IW_EV_QUAL_LEN);
-
-		/* Rate: stuffing multiple values in a single event requires
-		 * a bit more of magic - Jean II */
-		curr_val = curr_pos + IW_EV_LCP_LEN;
-
-		iwe->cmd = SIOCGIWRATE;
-		/* Those two flags are ignored... */
-		iwe->u.bitrate.fixed = 0;
-		iwe->u.bitrate.disabled = 0;
-		/* Max 8 values */
-		for (i = 0; i < curr_bss->rates_len; i++) {
-			/* Bit rate given in 500 kb/s units (+ 0x80) */
-			iwe->u.bitrate.value =
-			    ((curr_bss->rates[i] & 0x7f) * 500000);
-			/* Add new value to event */
-			curr_val = iwe_stream_add_value(info, curr_pos,
-							curr_val,
-							extra +
-							IW_SCAN_MAX_DATA, iwe,
-							IW_EV_PARAM_LEN);
-		}
-
-		/* Check if we added any event */
-		if ((curr_val - curr_pos) > IW_EV_LCP_LEN)
-			curr_pos = curr_val;
-
-		/* more information may be sent back using IWECUSTOM */
-
-	}
-
-	spin_unlock_irqrestore(&priv->bss_list_spinlock, flags);
-
-	data->length = (curr_pos - extra);
-	data->flags = 0;
-
-	kfree(iwe);
-	return 0;
-}
-
-static int at76_iw_handler_set_essid(struct net_device *netdev,
-				     struct iw_request_info *info,
-				     struct iw_point *data, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCSIWESSID - %s", netdev->name, extra);
-
-	if (data->flags) {
-		memcpy(priv->essid, extra, data->length);
-		priv->essid_size = data->length;
-	} else
-		priv->essid_size = 0;	/* Use any SSID */
-
-	return -EIWCOMMIT;
-}
-
-static int at76_iw_handler_get_essid(struct net_device *netdev,
-				     struct iw_request_info *info,
-				     struct iw_point *data, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-
-	if (priv->essid_size) {
-		/* not the ANY ssid in priv->essid */
-		data->flags = 1;
-		data->length = priv->essid_size;
-		memcpy(extra, priv->essid, data->length);
-	} else {
-		/* the ANY ssid was specified */
-		if (priv->mac_state == MAC_CONNECTED && priv->curr_bss) {
-			/* report the SSID we have found */
-			data->flags = 1;
-			data->length = priv->curr_bss->ssid_len;
-			memcpy(extra, priv->curr_bss->ssid, data->length);
-		} else {
-			/* report ANY back */
-			data->flags = 0;
-			data->length = 0;
-		}
-	}
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCGIWESSID - %.*s", netdev->name,
-		 data->length, extra);
-
-	return 0;
-}
-
-static int at76_iw_handler_set_rate(struct net_device *netdev,
-				    struct iw_request_info *info,
-				    struct iw_param *bitrate, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int ret = -EIWCOMMIT;
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCSIWRATE - %d", netdev->name,
-		 bitrate->value);
-
-	switch (bitrate->value) {
-	case -1:
-		priv->txrate = TX_RATE_AUTO;
-		break;		/* auto rate */
-	case 1000000:
-		priv->txrate = TX_RATE_1MBIT;
-		break;
-	case 2000000:
-		priv->txrate = TX_RATE_2MBIT;
-		break;
-	case 5500000:
-		priv->txrate = TX_RATE_5_5MBIT;
-		break;
-	case 11000000:
-		priv->txrate = TX_RATE_11MBIT;
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-static int at76_iw_handler_get_rate(struct net_device *netdev,
-				    struct iw_request_info *info,
-				    struct iw_param *bitrate, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int ret = 0;
-
-	switch (priv->txrate) {
-		/* return max rate if RATE_AUTO */
-	case TX_RATE_AUTO:
-		bitrate->value = 11000000;
-		break;
-	case TX_RATE_1MBIT:
-		bitrate->value = 1000000;
-		break;
-	case TX_RATE_2MBIT:
-		bitrate->value = 2000000;
-		break;
-	case TX_RATE_5_5MBIT:
-		bitrate->value = 5500000;
-		break;
-	case TX_RATE_11MBIT:
-		bitrate->value = 11000000;
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	bitrate->fixed = (priv->txrate != TX_RATE_AUTO);
-	bitrate->disabled = 0;
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCGIWRATE - %d", netdev->name,
-		 bitrate->value);
-
-	return ret;
-}
-
-static int at76_iw_handler_set_rts(struct net_device *netdev,
-				   struct iw_request_info *info,
-				   struct iw_param *rts, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int ret = -EIWCOMMIT;
-	int rthr = rts->value;
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCSIWRTS - value %d disabled %s",
-		 netdev->name, rts->value, (rts->disabled) ? "true" : "false");
-
-	if (rts->disabled)
-		rthr = MAX_RTS_THRESHOLD;
-
-	if ((rthr < 0) || (rthr > MAX_RTS_THRESHOLD))
-		ret = -EINVAL;
-	else
-		priv->rts_threshold = rthr;
-
-	return ret;
-}
-
-static int at76_iw_handler_get_rts(struct net_device *netdev,
-				   struct iw_request_info *info,
-				   struct iw_param *rts, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-
-	rts->value = priv->rts_threshold;
-	rts->disabled = (rts->value >= MAX_RTS_THRESHOLD);
-	rts->fixed = 1;
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCGIWRTS - value %d disabled %s",
-		 netdev->name, rts->value, (rts->disabled) ? "true" : "false");
-
-	return 0;
-}
-
-static int at76_iw_handler_set_frag(struct net_device *netdev,
-				    struct iw_request_info *info,
-				    struct iw_param *frag, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int ret = -EIWCOMMIT;
-	int fthr = frag->value;
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCSIWFRAG - value %d, disabled %s",
-		 netdev->name, frag->value,
-		 (frag->disabled) ? "true" : "false");
-
-	if (frag->disabled)
-		fthr = MAX_FRAG_THRESHOLD;
-
-	if ((fthr < MIN_FRAG_THRESHOLD) || (fthr > MAX_FRAG_THRESHOLD))
-		ret = -EINVAL;
-	else
-		priv->frag_threshold = fthr & ~0x1;	/* get an even value */
-
-	return ret;
-}
-
-static int at76_iw_handler_get_frag(struct net_device *netdev,
-				    struct iw_request_info *info,
-				    struct iw_param *frag, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-
-	frag->value = priv->frag_threshold;
-	frag->disabled = (frag->value >= MAX_FRAG_THRESHOLD);
-	frag->fixed = 1;
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCGIWFRAG - value %d, disabled %s",
-		 netdev->name, frag->value,
-		 (frag->disabled) ? "true" : "false");
-
-	return 0;
-}
-
-static int at76_iw_handler_get_txpow(struct net_device *netdev,
-				     struct iw_request_info *info,
-				     struct iw_param *power, char *extra)
-{
-	power->value = 15;
-	power->fixed = 1;	/* No power control */
-	power->disabled = 0;
-	power->flags = IW_TXPOW_DBM;
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCGIWTXPOW - txpow %d dBm", netdev->name,
-		 power->value);
-
-	return 0;
-}
-
-/* jal: short retry is handled by the firmware (at least 0.90.x),
-   while long retry is not (?) */
-static int at76_iw_handler_set_retry(struct net_device *netdev,
-				     struct iw_request_info *info,
-				     struct iw_param *retry, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int ret = -EIWCOMMIT;
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCSIWRETRY disabled %d flags 0x%x val %d",
-		 netdev->name, retry->disabled, retry->flags, retry->value);
-
-	if (!retry->disabled && (retry->flags & IW_RETRY_LIMIT)) {
-		if ((retry->flags & IW_RETRY_MIN) ||
-		    !(retry->flags & IW_RETRY_MAX))
-			priv->short_retry_limit = retry->value;
-		else
-			ret = -EINVAL;
-	} else
-		ret = -EINVAL;
-
-	return ret;
-}
-
-/* Adapted (ripped) from atmel.c */
-static int at76_iw_handler_get_retry(struct net_device *netdev,
-				     struct iw_request_info *info,
-				     struct iw_param *retry, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCGIWRETRY", netdev->name);
-
-	retry->disabled = 0;	/* Can't be disabled */
-	retry->flags = IW_RETRY_LIMIT;
-	retry->value = priv->short_retry_limit;
-
-	return 0;
-}
-
-static int at76_iw_handler_set_encode(struct net_device *netdev,
-				      struct iw_request_info *info,
-				      struct iw_point *encoding, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int index = (encoding->flags & IW_ENCODE_INDEX) - 1;
-	int len = encoding->length;
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCSIWENCODE - enc.flags %08x "
-		 "pointer %p len %d", netdev->name, encoding->flags,
-		 encoding->pointer, encoding->length);
-	at76_dbg(DBG_IOCTL,
-		 "%s: SIOCSIWENCODE - old wepstate: enabled %s key_id %d "
-		 "auth_mode %s", netdev->name,
-		 (priv->wep_enabled) ? "true" : "false", priv->wep_key_id,
-		 (priv->auth_mode ==
-		  WLAN_AUTH_SHARED_KEY) ? "restricted" : "open");
-
-	/* take the old default key if index is invalid */
-	if ((index < 0) || (index >= WEP_KEYS))
-		index = priv->wep_key_id;
-
-	if (len > 0) {
-		if (len > WEP_LARGE_KEY_LEN)
-			len = WEP_LARGE_KEY_LEN;
-
-		memset(priv->wep_keys[index], 0, WEP_KEY_LEN);
-		memcpy(priv->wep_keys[index], extra, len);
-		priv->wep_keys_len[index] = (len <= WEP_SMALL_KEY_LEN) ?
-		    WEP_SMALL_KEY_LEN : WEP_LARGE_KEY_LEN;
-		priv->wep_enabled = 1;
-	}
-
-	priv->wep_key_id = index;
-	priv->wep_enabled = ((encoding->flags & IW_ENCODE_DISABLED) == 0);
-
-	if (encoding->flags & IW_ENCODE_RESTRICTED)
-		priv->auth_mode = WLAN_AUTH_SHARED_KEY;
-	if (encoding->flags & IW_ENCODE_OPEN)
-		priv->auth_mode = WLAN_AUTH_OPEN;
-
-	at76_dbg(DBG_IOCTL,
-		 "%s: SIOCSIWENCODE - new wepstate: enabled %s key_id %d "
-		 "key_len %d auth_mode %s", netdev->name,
-		 (priv->wep_enabled) ? "true" : "false", priv->wep_key_id + 1,
-		 priv->wep_keys_len[priv->wep_key_id],
-		 (priv->auth_mode ==
-		  WLAN_AUTH_SHARED_KEY) ? "restricted" : "open");
-
-	return -EIWCOMMIT;
-}
-
-static int at76_iw_handler_get_encode(struct net_device *netdev,
-				      struct iw_request_info *info,
-				      struct iw_point *encoding, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int index = (encoding->flags & IW_ENCODE_INDEX) - 1;
-
-	if ((index < 0) || (index >= WEP_KEYS))
-		index = priv->wep_key_id;
-
-	encoding->flags =
-	    (priv->auth_mode == WLAN_AUTH_SHARED_KEY) ?
-	    IW_ENCODE_RESTRICTED : IW_ENCODE_OPEN;
-
-	if (!priv->wep_enabled)
-		encoding->flags |= IW_ENCODE_DISABLED;
-
-	if (encoding->pointer) {
-		encoding->length = priv->wep_keys_len[index];
-
-		memcpy(extra, priv->wep_keys[index], priv->wep_keys_len[index]);
-
-		encoding->flags |= (index + 1);
-	}
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCGIWENCODE - enc.flags %08x "
-		 "pointer %p len %d", netdev->name, encoding->flags,
-		 encoding->pointer, encoding->length);
-	at76_dbg(DBG_IOCTL,
-		 "%s: SIOCGIWENCODE - wepstate: enabled %s key_id %d "
-		 "key_len %d auth_mode %s", netdev->name,
-		 (priv->wep_enabled) ? "true" : "false", priv->wep_key_id + 1,
-		 priv->wep_keys_len[priv->wep_key_id],
-		 (priv->auth_mode ==
-		  WLAN_AUTH_SHARED_KEY) ? "restricted" : "open");
-
-	return 0;
-}
-
-static int at76_iw_handler_set_power(struct net_device *netdev,
-				     struct iw_request_info *info,
-				     struct iw_param *prq, char *extra)
-{
-	int err = -EIWCOMMIT;
-	struct at76_priv *priv = netdev_priv(netdev);
-
-	at76_dbg(DBG_IOCTL,
-		 "%s: SIOCSIWPOWER - disabled %s flags 0x%x value 0x%x",
-		 netdev->name, (prq->disabled) ? "true" : "false", prq->flags,
-		 prq->value);
-
-	if (prq->disabled)
-		priv->pm_mode = AT76_PM_OFF;
-	else {
-		switch (prq->flags & IW_POWER_MODE) {
-		case IW_POWER_ALL_R:
-		case IW_POWER_ON:
-			break;
-		default:
-			err = -EINVAL;
-			goto exit;
-		}
-		if (prq->flags & IW_POWER_PERIOD)
-			priv->pm_period = prq->value;
-
-		if (prq->flags & IW_POWER_TIMEOUT) {
-			err = -EINVAL;
-			goto exit;
-		}
-		priv->pm_mode = AT76_PM_ON;
-	}
-exit:
-	return err;
-}
-
-static int at76_iw_handler_get_power(struct net_device *netdev,
-				     struct iw_request_info *info,
-				     struct iw_param *power, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-
-	power->disabled = (priv->pm_mode == AT76_PM_OFF);
-	if (!power->disabled) {
-		power->flags = IW_POWER_PERIOD | IW_POWER_ALL_R;
-		power->value = priv->pm_period;
-	}
-
-	at76_dbg(DBG_IOCTL, "%s: SIOCGIWPOWER - %s flags 0x%x value 0x%x",
-		 netdev->name, power->disabled ? "disabled" : "enabled",
-		 power->flags, power->value);
-
-	return 0;
-}
-
-/*******************************************************************************
- * Private IOCTLS
- */
-static int at76_iw_set_short_preamble(struct net_device *netdev,
-				      struct iw_request_info *info, char *name,
-				      char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int val = *((int *)name);
-	int ret = -EIWCOMMIT;
-
-	at76_dbg(DBG_IOCTL, "%s: AT76_SET_SHORT_PREAMBLE, %d",
-		 netdev->name, val);
-
-	if (val < PREAMBLE_TYPE_LONG || val > PREAMBLE_TYPE_AUTO)
-		ret = -EINVAL;
-	else
-		priv->preamble_type = val;
-
-	return ret;
-}
-
-static int at76_iw_get_short_preamble(struct net_device *netdev,
-				      struct iw_request_info *info,
-				      union iwreq_data *wrqu, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-
-	snprintf(wrqu->name, sizeof(wrqu->name), "%s (%d)",
-		 preambles[priv->preamble_type], priv->preamble_type);
-	return 0;
-}
-
-static int at76_iw_set_debug(struct net_device *netdev,
-			     struct iw_request_info *info,
-			     struct iw_point *data, char *extra)
-{
-	char *ptr;
-	u32 val;
-
-	if (data->length > 0) {
-		val = simple_strtol(extra, &ptr, 0);
-
-		if (ptr == extra)
-			val = DBG_DEFAULTS;
-
-		at76_dbg(DBG_IOCTL, "%s: AT76_SET_DEBUG input %d: %s -> 0x%x",
-			 netdev->name, data->length, extra, val);
-	} else
-		val = DBG_DEFAULTS;
-
-	at76_dbg(DBG_IOCTL, "%s: AT76_SET_DEBUG, old 0x%x, new 0x%x",
-		 netdev->name, at76_debug, val);
-
-	/* jal: some more output to pin down lockups */
-	at76_dbg(DBG_IOCTL, "%s: netif running %d queue_stopped %d "
-		 "carrier_ok %d", netdev->name, netif_running(netdev),
-		 netif_queue_stopped(netdev), netif_carrier_ok(netdev));
-
-	at76_debug = val;
-
-	return 0;
-}
-
-static int at76_iw_get_debug(struct net_device *netdev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu, char *extra)
-{
-	snprintf(wrqu->name, sizeof(wrqu->name), "0x%08x", at76_debug);
-	return 0;
-}
-
-static int at76_iw_set_powersave_mode(struct net_device *netdev,
-				      struct iw_request_info *info, char *name,
-				      char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int val = *((int *)name);
-	int ret = -EIWCOMMIT;
-
-	at76_dbg(DBG_IOCTL, "%s: AT76_SET_POWERSAVE_MODE, %d (%s)",
-		 netdev->name, val,
-		 val == AT76_PM_OFF ? "active" : val == AT76_PM_ON ? "save" :
-		 val == AT76_PM_SMART ? "smart save" : "<invalid>");
-	if (val < AT76_PM_OFF || val > AT76_PM_SMART)
-		ret = -EINVAL;
-	else
-		priv->pm_mode = val;
-
-	return ret;
-}
-
-static int at76_iw_get_powersave_mode(struct net_device *netdev,
-				      struct iw_request_info *info,
-				      union iwreq_data *wrqu, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int *param = (int *)extra;
-
-	param[0] = priv->pm_mode;
-	return 0;
-}
-
-static int at76_iw_set_scan_times(struct net_device *netdev,
-				  struct iw_request_info *info, char *name,
-				  char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int mint = *((int *)name);
-	int maxt = *((int *)name + 1);
-	int ret = -EIWCOMMIT;
-
-	at76_dbg(DBG_IOCTL, "%s: AT76_SET_SCAN_TIMES - min %d max %d",
-		 netdev->name, mint, maxt);
-	if (mint <= 0 || maxt <= 0 || mint > maxt)
-		ret = -EINVAL;
-	else {
-		priv->scan_min_time = mint;
-		priv->scan_max_time = maxt;
-	}
-
-	return ret;
-}
-
-static int at76_iw_get_scan_times(struct net_device *netdev,
-				  struct iw_request_info *info,
-				  union iwreq_data *wrqu, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int *param = (int *)extra;
-
-	param[0] = priv->scan_min_time;
-	param[1] = priv->scan_max_time;
-	return 0;
-}
-
-static int at76_iw_set_scan_mode(struct net_device *netdev,
-				 struct iw_request_info *info, char *name,
-				 char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int val = *((int *)name);
-	int ret = -EIWCOMMIT;
-
-	at76_dbg(DBG_IOCTL, "%s: AT76_SET_SCAN_MODE - mode %s",
-		 netdev->name, (val = SCAN_TYPE_ACTIVE) ? "active" :
-		 (val = SCAN_TYPE_PASSIVE) ? "passive" : "<invalid>");
-
-	if (val != SCAN_TYPE_ACTIVE && val != SCAN_TYPE_PASSIVE)
-		ret = -EINVAL;
-	else
-		priv->scan_mode = val;
-
-	return ret;
-}
-
-static int at76_iw_get_scan_mode(struct net_device *netdev,
-				 struct iw_request_info *info,
-				 union iwreq_data *wrqu, char *extra)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int *param = (int *)extra;
-
-	param[0] = priv->scan_mode;
-	return 0;
-}
-
-#define AT76_SET_HANDLER(h, f) [h - SIOCIWFIRST] = (iw_handler) f
-
-/* Standard wireless handlers */
-static const iw_handler at76_handlers[] = {
-	AT76_SET_HANDLER(SIOCSIWCOMMIT, at76_iw_handler_commit),
-	AT76_SET_HANDLER(SIOCGIWNAME, at76_iw_handler_get_name),
-	AT76_SET_HANDLER(SIOCSIWFREQ, at76_iw_handler_set_freq),
-	AT76_SET_HANDLER(SIOCGIWFREQ, at76_iw_handler_get_freq),
-	AT76_SET_HANDLER(SIOCSIWMODE, at76_iw_handler_set_mode),
-	AT76_SET_HANDLER(SIOCGIWMODE, at76_iw_handler_get_mode),
-	AT76_SET_HANDLER(SIOCGIWRANGE, at76_iw_handler_get_range),
-	AT76_SET_HANDLER(SIOCSIWSPY, at76_iw_handler_set_spy),
-	AT76_SET_HANDLER(SIOCGIWSPY, at76_iw_handler_get_spy),
-	AT76_SET_HANDLER(SIOCSIWTHRSPY, at76_iw_handler_set_thrspy),
-	AT76_SET_HANDLER(SIOCGIWTHRSPY, at76_iw_handler_get_thrspy),
-	AT76_SET_HANDLER(SIOCSIWAP, at76_iw_handler_set_wap),
-	AT76_SET_HANDLER(SIOCGIWAP, at76_iw_handler_get_wap),
-	AT76_SET_HANDLER(SIOCSIWSCAN, at76_iw_handler_set_scan),
-	AT76_SET_HANDLER(SIOCGIWSCAN, at76_iw_handler_get_scan),
-	AT76_SET_HANDLER(SIOCSIWESSID, at76_iw_handler_set_essid),
-	AT76_SET_HANDLER(SIOCGIWESSID, at76_iw_handler_get_essid),
-	AT76_SET_HANDLER(SIOCSIWRATE, at76_iw_handler_set_rate),
-	AT76_SET_HANDLER(SIOCGIWRATE, at76_iw_handler_get_rate),
-	AT76_SET_HANDLER(SIOCSIWRTS, at76_iw_handler_set_rts),
-	AT76_SET_HANDLER(SIOCGIWRTS, at76_iw_handler_get_rts),
-	AT76_SET_HANDLER(SIOCSIWFRAG, at76_iw_handler_set_frag),
-	AT76_SET_HANDLER(SIOCGIWFRAG, at76_iw_handler_get_frag),
-	AT76_SET_HANDLER(SIOCGIWTXPOW, at76_iw_handler_get_txpow),
-	AT76_SET_HANDLER(SIOCSIWRETRY, at76_iw_handler_set_retry),
-	AT76_SET_HANDLER(SIOCGIWRETRY, at76_iw_handler_get_retry),
-	AT76_SET_HANDLER(SIOCSIWENCODE, at76_iw_handler_set_encode),
-	AT76_SET_HANDLER(SIOCGIWENCODE, at76_iw_handler_get_encode),
-	AT76_SET_HANDLER(SIOCSIWPOWER, at76_iw_handler_set_power),
-	AT76_SET_HANDLER(SIOCGIWPOWER, at76_iw_handler_get_power)
-};
-
-#define AT76_SET_PRIV(h, f) [h - SIOCIWFIRSTPRIV] = (iw_handler) f
-
-/* Private wireless handlers */
-static const iw_handler at76_priv_handlers[] = {
-	AT76_SET_PRIV(AT76_SET_SHORT_PREAMBLE, at76_iw_set_short_preamble),
-	AT76_SET_PRIV(AT76_GET_SHORT_PREAMBLE, at76_iw_get_short_preamble),
-	AT76_SET_PRIV(AT76_SET_DEBUG, at76_iw_set_debug),
-	AT76_SET_PRIV(AT76_GET_DEBUG, at76_iw_get_debug),
-	AT76_SET_PRIV(AT76_SET_POWERSAVE_MODE, at76_iw_set_powersave_mode),
-	AT76_SET_PRIV(AT76_GET_POWERSAVE_MODE, at76_iw_get_powersave_mode),
-	AT76_SET_PRIV(AT76_SET_SCAN_TIMES, at76_iw_set_scan_times),
-	AT76_SET_PRIV(AT76_GET_SCAN_TIMES, at76_iw_get_scan_times),
-	AT76_SET_PRIV(AT76_SET_SCAN_MODE, at76_iw_set_scan_mode),
-	AT76_SET_PRIV(AT76_GET_SCAN_MODE, at76_iw_get_scan_mode),
-};
-
-/* Names and arguments of private wireless handlers */
-static const struct iw_priv_args at76_priv_args[] = {
-	/* 0 - long, 1 - short */
-	{AT76_SET_SHORT_PREAMBLE,
-	 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble"},
-
-	{AT76_GET_SHORT_PREAMBLE,
-	 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 10, "get_preamble"},
-
-	/* we must pass the new debug mask as a string, because iwpriv cannot
-	 * parse hex numbers starting with 0x :-(  */
-	{AT76_SET_DEBUG,
-	 IW_PRIV_TYPE_CHAR | 10, 0, "set_debug"},
-
-	{AT76_GET_DEBUG,
-	 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 10, "get_debug"},
-
-	/* 1 - active, 2 - power save, 3 - smart power save */
-	{AT76_SET_POWERSAVE_MODE,
-	 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_powersave"},
-
-	{AT76_GET_POWERSAVE_MODE,
-	 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_powersave"},
-
-	/* min_channel_time, max_channel_time */
-	{AT76_SET_SCAN_TIMES,
-	 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "set_scan_times"},
-
-	{AT76_GET_SCAN_TIMES,
-	 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, "get_scan_times"},
-
-	/* 0 - active, 1 - passive scan */
-	{AT76_SET_SCAN_MODE,
-	 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_scan_mode"},
-
-	{AT76_GET_SCAN_MODE,
-	 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_scan_mode"},
-};
-
-static const struct iw_handler_def at76_handler_def = {
-	.num_standard = ARRAY_SIZE(at76_handlers),
-	.num_private = ARRAY_SIZE(at76_priv_handlers),
-	.num_private_args = ARRAY_SIZE(at76_priv_args),
-	.standard = at76_handlers,
-	.private = at76_priv_handlers,
-	.private_args = at76_priv_args,
-	.get_wireless_stats = at76_get_wireless_stats,
-};
-
-static const u8 snapsig[] = { 0xaa, 0xaa, 0x03 };
-
-/* RFC 1042 encapsulates Ethernet frames in 802.2 SNAP (0xaa, 0xaa, 0x03) with
- * a SNAP OID of 0 (0x00, 0x00, 0x00) */
-static const u8 rfc1042sig[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
-
-static int at76_tx(struct sk_buff *skb, struct net_device *netdev)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	struct net_device_stats *stats = &priv->stats;
-	int ret = 0;
-	int wlen;
-	int submit_len;
-	struct at76_tx_buffer *tx_buffer = priv->bulk_out_buffer;
-	struct ieee80211_hdr_3addr *i802_11_hdr =
-	    (struct ieee80211_hdr_3addr *)tx_buffer->packet;
-	u8 *payload = i802_11_hdr->payload;
-	struct ethhdr *eh = (struct ethhdr *)skb->data;
-
-	if (netif_queue_stopped(netdev)) {
-		printk(KERN_ERR "%s: %s called while netdev is stopped\n",
-		       netdev->name, __func__);
-		/* skip this packet */
-		dev_kfree_skb(skb);
-		return 0;
-	}
-
-	if (priv->tx_urb->status == -EINPROGRESS) {
-		printk(KERN_ERR "%s: %s called while tx urb is pending\n",
-		       netdev->name, __func__);
-		/* skip this packet */
-		dev_kfree_skb(skb);
-		return 0;
-	}
-
-	if (skb->len < ETH_HLEN) {
-		printk(KERN_ERR "%s: %s: skb too short (%d)\n",
-		       netdev->name, __func__, skb->len);
-		dev_kfree_skb(skb);
-		return 0;
-	}
-
-	at76_ledtrig_tx_activity();	/* tell ledtrigger we send a packet */
-
-	/* we can get rid of memcpy if we set netdev->hard_header_len to
-	   reserve enough space, but we would need to keep the skb around */
-
-	if (ntohs(eh->h_proto) <= ETH_DATA_LEN) {
-		/* this is a 802.3 packet */
-		if (skb->len >= ETH_HLEN + sizeof(rfc1042sig)
-		    && skb->data[ETH_HLEN] == rfc1042sig[0]
-		    && skb->data[ETH_HLEN + 1] == rfc1042sig[1]) {
-			/* higher layer delivered SNAP header - keep it */
-			memcpy(payload, skb->data + ETH_HLEN,
-			       skb->len - ETH_HLEN);
-			wlen = IEEE80211_3ADDR_LEN + skb->len - ETH_HLEN;
-		} else {
-			printk(KERN_ERR "%s: dropping non-SNAP 802.2 packet "
-			       "(DSAP 0x%02x SSAP 0x%02x cntrl 0x%02x)\n",
-			       priv->netdev->name, skb->data[ETH_HLEN],
-			       skb->data[ETH_HLEN + 1],
-			       skb->data[ETH_HLEN + 2]);
-			dev_kfree_skb(skb);
-			return 0;
-		}
-	} else {
-		/* add RFC 1042 header in front */
-		memcpy(payload, rfc1042sig, sizeof(rfc1042sig));
-		memcpy(payload + sizeof(rfc1042sig), &eh->h_proto,
-		       skb->len - offsetof(struct ethhdr, h_proto));
-		wlen = IEEE80211_3ADDR_LEN + sizeof(rfc1042sig) + skb->len -
-		    offsetof(struct ethhdr, h_proto);
-	}
-
-	/* make wireless header */
-	i802_11_hdr->frame_ctl =
-	    cpu_to_le16(IEEE80211_FTYPE_DATA |
-			(priv->wep_enabled ? IEEE80211_FCTL_PROTECTED : 0) |
-			(priv->iw_mode ==
-			 IW_MODE_INFRA ? IEEE80211_FCTL_TODS : 0));
-
-	if (priv->iw_mode == IW_MODE_ADHOC) {
-		memcpy(i802_11_hdr->addr1, eh->h_dest, ETH_ALEN);
-		memcpy(i802_11_hdr->addr2, eh->h_source, ETH_ALEN);
-		memcpy(i802_11_hdr->addr3, priv->bssid, ETH_ALEN);
-	} else if (priv->iw_mode == IW_MODE_INFRA) {
-		memcpy(i802_11_hdr->addr1, priv->bssid, ETH_ALEN);
-		memcpy(i802_11_hdr->addr2, eh->h_source, ETH_ALEN);
-		memcpy(i802_11_hdr->addr3, eh->h_dest, ETH_ALEN);
-	}
-
-	i802_11_hdr->duration_id = cpu_to_le16(0);
-	i802_11_hdr->seq_ctl = cpu_to_le16(0);
-
-	/* setup 'Atmel' header */
-	tx_buffer->wlength = cpu_to_le16(wlen);
-	tx_buffer->tx_rate = priv->txrate;
-	/* for broadcast destination addresses, the firmware 0.100.x
-	   seems to choose the highest rate set with CMD_STARTUP in
-	   basic_rate_set replacing this value */
-
-	memset(tx_buffer->reserved, 0, sizeof(tx_buffer->reserved));
-
-	tx_buffer->padding = at76_calc_padding(wlen);
-	submit_len = wlen + AT76_TX_HDRLEN + tx_buffer->padding;
-
-	at76_dbg(DBG_TX_DATA_CONTENT, "%s skb->data %s", priv->netdev->name,
-		 hex2str(skb->data, 32));
-	at76_dbg(DBG_TX_DATA, "%s tx: wlen 0x%x pad 0x%x rate %d hdr %s",
-		 priv->netdev->name,
-		 le16_to_cpu(tx_buffer->wlength),
-		 tx_buffer->padding, tx_buffer->tx_rate,
-		 hex2str(i802_11_hdr, sizeof(*i802_11_hdr)));
-	at76_dbg(DBG_TX_DATA_CONTENT, "%s payload %s", priv->netdev->name,
-		 hex2str(payload, 48));
-
-	/* send stuff */
-	netif_stop_queue(netdev);
-	netdev->trans_start = jiffies;
-
-	usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, tx_buffer,
-			  submit_len, at76_tx_callback, priv);
-	ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC);
-	if (ret) {
-		stats->tx_errors++;
-		printk(KERN_ERR "%s: error in tx submit urb: %d\n",
-		       netdev->name, ret);
-		if (ret == -EINVAL)
-			printk(KERN_ERR
-			       "%s: -EINVAL: tx urb %p hcpriv %p complete %p\n",
-			       priv->netdev->name, priv->tx_urb,
-			       priv->tx_urb->hcpriv, priv->tx_urb->complete);
-	} else
-		stats->tx_bytes += skb->len;
-
-	dev_kfree_skb(skb);
-	return NETDEV_TX_OK;
-}
-
-static void at76_tx_timeout(struct net_device *netdev)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-
-	if (!priv)
-		return;
-	dev_warn(&netdev->dev, "tx timeout.");
-
-	usb_unlink_urb(priv->tx_urb);
-	priv->stats.tx_errors++;
-}
-
-static int at76_submit_rx_urb(struct at76_priv *priv)
-{
-	int ret;
-	int size;
-	struct sk_buff *skb = priv->rx_skb;
-
-	if (!priv->rx_urb) {
-		printk(KERN_ERR "%s: %s: priv->rx_urb is NULL\n",
-		       priv->netdev->name, __func__);
-		return -EFAULT;
-	}
-
-	if (!skb) {
-		skb = dev_alloc_skb(sizeof(struct at76_rx_buffer));
-		if (!skb) {
-			printk(KERN_ERR "%s: cannot allocate rx skbuff\n",
-			       priv->netdev->name);
-			ret = -ENOMEM;
-			goto exit;
-		}
-		priv->rx_skb = skb;
-	} else {
-		skb_push(skb, skb_headroom(skb));
-		skb_trim(skb, 0);
-	}
-
-	size = skb_tailroom(skb);
-	usb_fill_bulk_urb(priv->rx_urb, priv->udev, priv->rx_pipe,
-			  skb_put(skb, size), size, at76_rx_callback, priv);
-	ret = usb_submit_urb(priv->rx_urb, GFP_ATOMIC);
-	if (ret < 0) {
-		if (ret == -ENODEV)
-			at76_dbg(DBG_DEVSTART,
-				 "usb_submit_urb returned -ENODEV");
-		else
-			printk(KERN_ERR "%s: rx, usb_submit_urb failed: %d\n",
-			       priv->netdev->name, ret);
-	}
-
-exit:
-	if (ret < 0 && ret != -ENODEV)
-		printk(KERN_ERR "%s: cannot submit rx urb - please unload the "
-		       "driver and/or power cycle the device\n",
-		       priv->netdev->name);
-
-	return ret;
-}
-
-static int at76_open(struct net_device *netdev)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	int ret = 0;
-
-	at76_dbg(DBG_PROC_ENTRY, "%s(): entry", __func__);
-
-	if (mutex_lock_interruptible(&priv->mtx))
-		return -EINTR;
-
-	/* if netdev->dev_addr != priv->mac_addr we must
-	   set the mac address in the device ! */
-	if (compare_ether_addr(netdev->dev_addr, priv->mac_addr)) {
-		if (at76_add_mac_address(priv, netdev->dev_addr) >= 0)
-			at76_dbg(DBG_PROGRESS, "%s: set new MAC addr %pM",
-				 netdev->name, netdev->dev_addr);
-	}
-
-	priv->scan_state = SCAN_IDLE;
-	priv->last_scan = jiffies;
-
-	ret = at76_submit_rx_urb(priv);
-	if (ret < 0) {
-		printk(KERN_ERR "%s: open: submit_rx_urb failed: %d\n",
-		       netdev->name, ret);
-		goto error;
-	}
-
-	schedule_delayed_work(&priv->dwork_restart, 0);
-
-	at76_dbg(DBG_PROC_ENTRY, "%s(): end", __func__);
-error:
-	mutex_unlock(&priv->mtx);
-	return ret < 0 ? ret : 0;
-}
-
-static int at76_stop(struct net_device *netdev)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-
-	at76_dbg(DBG_DEVSTART, "%s: ENTER", __func__);
-
-	if (mutex_lock_interruptible(&priv->mtx))
-		return -EINTR;
-
-	at76_quiesce(priv);
-
-	if (!priv->device_unplugged) {
-		/* We are called by "ifconfig ethX down", not because the
-		 * device is not available anymore. */
-		at76_set_radio(priv, 0);
-
-		/* We unlink rx_urb because at76_open() re-submits it.
-		 * If unplugged, at76_delete_device() takes care of it. */
-		usb_kill_urb(priv->rx_urb);
-	}
-
-	/* free the bss_list */
-	at76_free_bss_list(priv);
-
-	mutex_unlock(&priv->mtx);
-	at76_dbg(DBG_DEVSTART, "%s: EXIT", __func__);
-
-	return 0;
-}
-
-static void at76_ethtool_get_drvinfo(struct net_device *netdev,
-				     struct ethtool_drvinfo *info)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-
-	strncpy(info->driver, DRIVER_NAME, sizeof(info->driver));
-	strncpy(info->version, DRIVER_VERSION, sizeof(info->version));
-
-	usb_make_path(priv->udev, info->bus_info, sizeof(info->bus_info));
-
-	snprintf(info->fw_version, sizeof(info->fw_version), "%d.%d.%d-%d",
-		 priv->fw_version.major, priv->fw_version.minor,
-		 priv->fw_version.patch, priv->fw_version.build);
-}
-
-static u32 at76_ethtool_get_link(struct net_device *netdev)
-{
-	struct at76_priv *priv = netdev_priv(netdev);
-	return priv->mac_state == MAC_CONNECTED;
-}
-
-static struct ethtool_ops at76_ethtool_ops = {
-	.get_drvinfo = at76_ethtool_get_drvinfo,
-	.get_link = at76_ethtool_get_link,
-};
-
-/* Download external firmware */
-static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe)
-{
-	int ret;
-	int op_mode;
-	int blockno = 0;
-	int bsize;
-	u8 *block;
-	u8 *buf = fwe->extfw;
-	int size = fwe->extfw_size;
-
-	if (!buf || !size)
-		return -ENOENT;
-
-	op_mode = at76_get_op_mode(udev);
-	at76_dbg(DBG_DEVSTART, "opmode %d", op_mode);
-
-	if (op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
-		dev_printk(KERN_ERR, &udev->dev, "unexpected opmode %d\n",
-			   op_mode);
-		return -EINVAL;
-	}
-
-	block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL);
-	if (!block)
-		return -ENOMEM;
-
-	at76_dbg(DBG_DEVSTART, "downloading external firmware");
-
-	/* for fw >= 0.100, the device needs an extra empty block */
-	do {
-		bsize = min_t(int, size, FW_BLOCK_SIZE);
-		memcpy(block, buf, bsize);
-		at76_dbg(DBG_DEVSTART,
-			 "ext fw, size left = %5d, bsize = %4d, blockno = %2d",
-			 size, bsize, blockno);
-		ret = at76_load_ext_fw_block(udev, blockno, block, bsize);
-		if (ret != bsize) {
-			dev_printk(KERN_ERR, &udev->dev,
-				   "loading %dth firmware block failed: %d\n",
-				   blockno, ret);
-			goto exit;
-		}
-		buf += bsize;
-		size -= bsize;
-		blockno++;
-	} while (bsize > 0);
-
-	if (at76_is_505a(fwe->board_type)) {
-		at76_dbg(DBG_DEVSTART, "200 ms delay for 505a");
-		schedule_timeout_interruptible(HZ / 5 + 1);
-	}
-
-exit:
-	kfree(block);
-	if (ret < 0)
-		dev_printk(KERN_ERR, &udev->dev,
-			   "downloading external firmware failed: %d\n", ret);
-	return ret;
-}
-
-/* Download internal firmware */
-static int at76_load_internal_fw(struct usb_device *udev, struct fwentry *fwe)
-{
-	int ret;
-	int need_remap = !at76_is_505a(fwe->board_type);
-
-	ret = at76_usbdfu_download(udev, fwe->intfw, fwe->intfw_size,
-				   need_remap ? 0 : 2 * HZ);
-
-	if (ret < 0) {
-		dev_printk(KERN_ERR, &udev->dev,
-			   "downloading internal fw failed with %d\n", ret);
-		goto exit;
-	}
-
-	at76_dbg(DBG_DEVSTART, "sending REMAP");
-
-	/* no REMAP for 505A (see SF driver) */
-	if (need_remap) {
-		ret = at76_remap(udev);
-		if (ret < 0) {
-			dev_printk(KERN_ERR, &udev->dev,
-				   "sending REMAP failed with %d\n", ret);
-			goto exit;
-		}
-	}
-
-	at76_dbg(DBG_DEVSTART, "sleeping for 2 seconds");
-	schedule_timeout_interruptible(2 * HZ + 1);
-	usb_reset_device(udev);
-
-exit:
-	return ret;
-}
-
-static int at76_match_essid(struct at76_priv *priv, struct bss_info *ptr)
-{
-	/* common criteria for both modi */
-
-	int ret = (priv->essid_size == 0 /* ANY ssid */  ||
-		   (priv->essid_size == ptr->ssid_len &&
-		    !memcmp(priv->essid, ptr->ssid, ptr->ssid_len)));
-	if (!ret)
-		at76_dbg(DBG_BSS_MATCH,
-			 "%s bss table entry %p: essid didn't match",
-			 priv->netdev->name, ptr);
-	return ret;
-}
-
-static inline int at76_match_mode(struct at76_priv *priv, struct bss_info *ptr)
-{
-	int ret;
-
-	if (priv->iw_mode == IW_MODE_ADHOC)
-		ret = ptr->capa & WLAN_CAPABILITY_IBSS;
-	else
-		ret = ptr->capa & WLAN_CAPABILITY_ESS;
-	if (!ret)
-		at76_dbg(DBG_BSS_MATCH,
-			 "%s bss table entry %p: mode didn't match",
-			 priv->netdev->name, ptr);
-	return ret;
-}
-
-static int at76_match_rates(struct at76_priv *priv, struct bss_info *ptr)
-{
-	int i;
-
-	for (i = 0; i < ptr->rates_len; i++) {
-		u8 rate = ptr->rates[i];
-
-		if (!(rate & 0x80))
-			continue;
-
-		/* this is a basic rate we have to support
-		   (see IEEE802.11, ch. 7.3.2.2) */
-		if (rate != (0x80 | hw_rates[0])
-		    && rate != (0x80 | hw_rates[1])
-		    && rate != (0x80 | hw_rates[2])
-		    && rate != (0x80 | hw_rates[3])) {
-			at76_dbg(DBG_BSS_MATCH,
-				 "%s: bss table entry %p: basic rate %02x not "
-				 "supported", priv->netdev->name, ptr, rate);
-			return 0;
-		}
-	}
-
-	/* if we use short preamble, the bss must support it */
-	if (priv->preamble_type == PREAMBLE_TYPE_SHORT &&
-	    !(ptr->capa & WLAN_CAPABILITY_SHORT_PREAMBLE)) {
-		at76_dbg(DBG_BSS_MATCH,
-			 "%s: %p does not support short preamble",
-			 priv->netdev->name, ptr);
-		return 0;
-	} else
-		return 1;
-}
-
-static inline int at76_match_wep(struct at76_priv *priv, struct bss_info *ptr)
-{
-	if (!priv->wep_enabled && ptr->capa & WLAN_CAPABILITY_PRIVACY) {
-		/* we have disabled WEP, but the BSS signals privacy */
-		at76_dbg(DBG_BSS_MATCH,
-			 "%s: bss table entry %p: requires encryption",
-			 priv->netdev->name, ptr);
-		return 0;
-	}
-	/* otherwise if the BSS does not signal privacy it may well
-	   accept encrypted packets from us ... */
-	return 1;
-}
-
-static inline int at76_match_bssid(struct at76_priv *priv, struct bss_info *ptr)
-{
-	if (!priv->wanted_bssid_valid ||
-	    !compare_ether_addr(ptr->bssid, priv->wanted_bssid))
-		return 1;
-
-	at76_dbg(DBG_BSS_MATCH,
-		 "%s: requested bssid - %pM does not match",
-		 priv->netdev->name, priv->wanted_bssid);
-	at76_dbg(DBG_BSS_MATCH,
-		 "      AP bssid - %pM of bss table entry %p",
-		 ptr->bssid, ptr);
-	return 0;
-}
-
-/**
- * at76_match_bss - try to find a matching bss in priv->bss
- *
- * last - last bss tried
- *
- * last == NULL signals a new round starting with priv->bss_list.next
- * this function must be called inside an acquired priv->bss_list_spinlock
- * otherwise the timeout on bss may remove the newly chosen entry
- */
-static struct bss_info *at76_match_bss(struct at76_priv *priv,
-				       struct bss_info *last)
-{
-	struct bss_info *ptr = NULL;
-	struct list_head *curr;
-
-	curr = last ? last->list.next : priv->bss_list.next;
-	while (curr != &priv->bss_list) {
-		ptr = list_entry(curr, struct bss_info, list);
-		if (at76_match_essid(priv, ptr) && at76_match_mode(priv, ptr)
-		    && at76_match_wep(priv, ptr) && at76_match_rates(priv, ptr)
-		    && at76_match_bssid(priv, ptr))
-			break;
-		curr = curr->next;
-	}
-
-	if (curr == &priv->bss_list)
-		ptr = NULL;
-	/* otherwise ptr points to the struct bss_info we have chosen */
-
-	at76_dbg(DBG_BSS_TABLE, "%s %s: returned %p", priv->netdev->name,
-		 __func__, ptr);
-	return ptr;
-}
-
-/* Start joining a matching BSS, or create own IBSS */
-static void at76_work_join(struct work_struct *work)
-{
-	struct at76_priv *priv = container_of(work, struct at76_priv,
-					      work_join);
-	int ret;
-	unsigned long flags;
-
-	mutex_lock(&priv->mtx);
-
-	WARN_ON(priv->mac_state != MAC_JOINING);
-	if (priv->mac_state != MAC_JOINING)
-		goto exit;
-
-	/* secure the access to priv->curr_bss ! */
-	spin_lock_irqsave(&priv->bss_list_spinlock, flags);
-	priv->curr_bss = at76_match_bss(priv, priv->curr_bss);
-	spin_unlock_irqrestore(&priv->bss_list_spinlock, flags);
-
-	if (!priv->curr_bss) {
-		/* here we haven't found a matching (i)bss ... */
-		if (priv->iw_mode == IW_MODE_ADHOC) {
-			at76_set_mac_state(priv, MAC_OWN_IBSS);
-			at76_start_ibss(priv);
-			goto exit;
-		}
-		/* haven't found a matching BSS in infra mode - try again */
-		at76_set_mac_state(priv, MAC_SCANNING);
-		schedule_work(&priv->work_start_scan);
-		goto exit;
-	}
-
-	ret = at76_join_bss(priv, priv->curr_bss);
-	if (ret < 0) {
-		printk(KERN_ERR "%s: join_bss failed with %d\n",
-		       priv->netdev->name, ret);
-		goto exit;
-	}
-
-	ret = at76_wait_completion(priv, CMD_JOIN);
-	if (ret != CMD_STATUS_COMPLETE) {
-		if (ret != CMD_STATUS_TIME_OUT)
-			printk(KERN_ERR "%s: join_bss completed with %d\n",
-			       priv->netdev->name, ret);
-		else
-			printk(KERN_INFO "%s: join_bss ssid %pM timed out\n",
-			       priv->netdev->name,
-			       priv->curr_bss->bssid);
-
-		/* retry next BSS immediately */
-		schedule_work(&priv->work_join);
-		goto exit;
-	}
-
-	/* here we have joined the (I)BSS */
-	if (priv->iw_mode == IW_MODE_ADHOC) {
-		struct bss_info *bptr = priv->curr_bss;
-		at76_set_mac_state(priv, MAC_CONNECTED);
-		/* get ESSID, BSSID and channel for priv->curr_bss */
-		priv->essid_size = bptr->ssid_len;
-		memcpy(priv->essid, bptr->ssid, bptr->ssid_len);
-		memcpy(priv->bssid, bptr->bssid, ETH_ALEN);
-		priv->channel = bptr->channel;
-		at76_iwevent_bss_connect(priv->netdev, bptr->bssid);
-		netif_carrier_on(priv->netdev);
-		netif_start_queue(priv->netdev);
-		/* just to be sure */
-		cancel_delayed_work(&priv->dwork_get_scan);
-		cancel_delayed_work(&priv->dwork_auth);
-		cancel_delayed_work(&priv->dwork_assoc);
-	} else {
-		/* send auth req */
-		priv->retries = AUTH_RETRIES;
-		at76_set_mac_state(priv, MAC_AUTH);
-		at76_auth_req(priv, priv->curr_bss, 1, NULL);
-		at76_dbg(DBG_MGMT_TIMER,
-			 "%s:%d: starting mgmt_timer + HZ", __func__, __LINE__);
-		schedule_delayed_work(&priv->dwork_auth, AUTH_TIMEOUT);
-	}
-
-exit:
-	mutex_unlock(&priv->mtx);
-}
-
-/* Reap scan results */
-static void at76_dwork_get_scan(struct work_struct *work)
-{
-	int status;
-	int ret;
-	struct at76_priv *priv = container_of(work, struct at76_priv,
-					      dwork_get_scan.work);
-
-	mutex_lock(&priv->mtx);
-	WARN_ON(priv->mac_state != MAC_SCANNING);
-	if (priv->mac_state != MAC_SCANNING)
-		goto exit;
-
-	status = at76_get_cmd_status(priv->udev, CMD_SCAN);
-	if (status < 0) {
-		printk(KERN_ERR "%s: %s: at76_get_cmd_status failed with %d\n",
-		       priv->netdev->name, __func__, status);
-		status = CMD_STATUS_IN_PROGRESS;
-		/* INFO: Hope it was a one off error - if not, scanning
-		   further down the line and stop this cycle */
-	}
-	at76_dbg(DBG_PROGRESS,
-		 "%s %s: got cmd_status %d (state %s, need_any %d)",
-		 priv->netdev->name, __func__, status,
-		 mac_states[priv->mac_state], priv->scan_need_any);
-
-	if (status != CMD_STATUS_COMPLETE) {
-		if ((status != CMD_STATUS_IN_PROGRESS) &&
-		    (status != CMD_STATUS_IDLE))
-			printk(KERN_ERR "%s: %s: Bad scan status: %s\n",
-			       priv->netdev->name, __func__,
-			       at76_get_cmd_status_string(status));
-
-		/* the first cmd status after scan start is always a IDLE ->
-		   start the timer to poll again until COMPLETED */
-		at76_dbg(DBG_MGMT_TIMER,
-			 "%s:%d: starting mgmt_timer for %d ticks",
-			 __func__, __LINE__, SCAN_POLL_INTERVAL);
-		schedule_delayed_work(&priv->dwork_get_scan,
-				      SCAN_POLL_INTERVAL);
-		goto exit;
-	}
-
-	if (at76_debug & DBG_BSS_TABLE)
-		at76_dump_bss_table(priv);
-
-	if (priv->scan_need_any) {
-		ret = at76_start_scan(priv, 0);
-		if (ret < 0)
-			printk(KERN_ERR
-			       "%s: %s: start_scan (ANY) failed with %d\n",
-			       priv->netdev->name, __func__, ret);
-		at76_dbg(DBG_MGMT_TIMER,
-			 "%s:%d: starting mgmt_timer for %d ticks", __func__,
-			 __LINE__, SCAN_POLL_INTERVAL);
-		schedule_delayed_work(&priv->dwork_get_scan,
-				      SCAN_POLL_INTERVAL);
-		priv->scan_need_any = 0;
-	} else {
-		priv->scan_state = SCAN_COMPLETED;
-		/* report the end of scan to user space */
-		at76_iwevent_scan_complete(priv->netdev);
-		at76_set_mac_state(priv, MAC_JOINING);
-		schedule_work(&priv->work_join);
-	}
-
-exit:
-	mutex_unlock(&priv->mtx);
-}
-
-/* Handle loss of beacons from the AP */
-static void at76_dwork_beacon(struct work_struct *work)
-{
-	struct at76_priv *priv = container_of(work, struct at76_priv,
-					      dwork_beacon.work);
-
-	mutex_lock(&priv->mtx);
-	if (priv->mac_state != MAC_CONNECTED || priv->iw_mode != IW_MODE_INFRA)
-		goto exit;
-
-	/* We haven't received any beacons from out AP for BEACON_TIMEOUT */
-	printk(KERN_INFO "%s: lost beacon bssid %pM\n",
-	       priv->netdev->name, priv->curr_bss->bssid);
-
-	netif_carrier_off(priv->netdev);
-	netif_stop_queue(priv->netdev);
-	at76_iwevent_bss_disconnect(priv->netdev);
-	at76_set_mac_state(priv, MAC_SCANNING);
-	schedule_work(&priv->work_start_scan);
-
-exit:
-	mutex_unlock(&priv->mtx);
-}
-
-/* Handle authentication response timeout */
-static void at76_dwork_auth(struct work_struct *work)
-{
-	struct at76_priv *priv = container_of(work, struct at76_priv,
-					      dwork_auth.work);
-
-	mutex_lock(&priv->mtx);
-	WARN_ON(priv->mac_state != MAC_AUTH);
-	if (priv->mac_state != MAC_AUTH)
-		goto exit;
-
-	at76_dbg(DBG_PROGRESS, "%s: authentication response timeout",
-		 priv->netdev->name);
-
-	if (priv->retries-- >= 0) {
-		at76_auth_req(priv, priv->curr_bss, 1, NULL);
-		at76_dbg(DBG_MGMT_TIMER, "%s:%d: starting mgmt_timer + HZ",
-			 __func__, __LINE__);
-		schedule_delayed_work(&priv->dwork_auth, AUTH_TIMEOUT);
-	} else {
-		/* try to get next matching BSS */
-		at76_set_mac_state(priv, MAC_JOINING);
-		schedule_work(&priv->work_join);
-	}
-
-exit:
-	mutex_unlock(&priv->mtx);
-}
-
-/* Handle association response timeout */
-static void at76_dwork_assoc(struct work_struct *work)
-{
-	struct at76_priv *priv = container_of(work, struct at76_priv,
-					      dwork_assoc.work);
-
-	mutex_lock(&priv->mtx);
-	WARN_ON(priv->mac_state != MAC_ASSOC);
-	if (priv->mac_state != MAC_ASSOC)
-		goto exit;
-
-	at76_dbg(DBG_PROGRESS, "%s: association response timeout",
-		 priv->netdev->name);
-
-	if (priv->retries-- >= 0) {
-		at76_assoc_req(priv, priv->curr_bss);
-		at76_dbg(DBG_MGMT_TIMER, "%s:%d: starting mgmt_timer + HZ",
-			 __func__, __LINE__);
-		schedule_delayed_work(&priv->dwork_assoc, ASSOC_TIMEOUT);
-	} else {
-		/* try to get next matching BSS */
-		at76_set_mac_state(priv, MAC_JOINING);
-		schedule_work(&priv->work_join);
-	}
-
-exit:
-	mutex_unlock(&priv->mtx);
-}
-
-/* Read new bssid in ad-hoc mode */
-static void at76_work_new_bss(struct work_struct *work)
-{
-	struct at76_priv *priv = container_of(work, struct at76_priv,
-					      work_new_bss);
-	int ret;
-	struct mib_mac_mgmt mac_mgmt;
-
-	mutex_lock(&priv->mtx);
-
-	ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, &mac_mgmt,
-			   sizeof(struct mib_mac_mgmt));
-	if (ret < 0) {
-		printk(KERN_ERR "%s: at76_get_mib failed: %d\n",
-		       priv->netdev->name, ret);
-		goto exit;
-	}
-
-	at76_dbg(DBG_PROGRESS, "ibss_change = 0x%2x", mac_mgmt.ibss_change);
-	memcpy(priv->bssid, mac_mgmt.current_bssid, ETH_ALEN);
-	at76_dbg(DBG_PROGRESS, "using BSSID %pM", priv->bssid);
-
-	at76_iwevent_bss_connect(priv->netdev, priv->bssid);
-
-	priv->mib_buf.type = MIB_MAC_MGMT;
-	priv->mib_buf.size = 1;
-	priv->mib_buf.index = offsetof(struct mib_mac_mgmt, ibss_change);
-	priv->mib_buf.data.byte = 0;
-
-	ret = at76_set_mib(priv, &priv->mib_buf);
-	if (ret < 0)
-		printk(KERN_ERR "%s: set_mib (ibss change ok) failed: %d\n",
-		       priv->netdev->name, ret);
-
-exit:
-	mutex_unlock(&priv->mtx);
-}
-
-static int at76_startup_device(struct at76_priv *priv)
-{
-	struct at76_card_config *ccfg = &priv->card_config;
-	int ret;
-
-	at76_dbg(DBG_PARAMS,
-		 "%s param: ssid %.*s (%s) mode %s ch %d wep %s key %d "
-		 "keylen %d", priv->netdev->name, priv->essid_size, priv->essid,
-		 hex2str(priv->essid, IW_ESSID_MAX_SIZE),
-		 priv->iw_mode == IW_MODE_ADHOC ? "adhoc" : "infra",
-		 priv->channel, priv->wep_enabled ? "enabled" : "disabled",
-		 priv->wep_key_id, priv->wep_keys_len[priv->wep_key_id]);
-	at76_dbg(DBG_PARAMS,
-		 "%s param: preamble %s rts %d retry %d frag %d "
-		 "txrate %s auth_mode %d", priv->netdev->name,
-		 preambles[priv->preamble_type], priv->rts_threshold,
-		 priv->short_retry_limit, priv->frag_threshold,
-		 priv->txrate == TX_RATE_1MBIT ? "1MBit" : priv->txrate ==
-		 TX_RATE_2MBIT ? "2MBit" : priv->txrate ==
-		 TX_RATE_5_5MBIT ? "5.5MBit" : priv->txrate ==
-		 TX_RATE_11MBIT ? "11MBit" : priv->txrate ==
-		 TX_RATE_AUTO ? "auto" : "<invalid>", priv->auth_mode);
-	at76_dbg(DBG_PARAMS,
-		 "%s param: pm_mode %d pm_period %d auth_mode %s "
-		 "scan_times %d %d scan_mode %s",
-		 priv->netdev->name, priv->pm_mode, priv->pm_period,
-		 priv->auth_mode == WLAN_AUTH_OPEN ? "open" : "shared_secret",
-		 priv->scan_min_time, priv->scan_max_time,
-		 priv->scan_mode == SCAN_TYPE_ACTIVE ? "active" : "passive");
-
-	memset(ccfg, 0, sizeof(struct at76_card_config));
-	ccfg->promiscuous_mode = 0;
-	ccfg->short_retry_limit = priv->short_retry_limit;
-
-	if (priv->wep_enabled) {
-		if (priv->wep_keys_len[priv->wep_key_id] > WEP_SMALL_KEY_LEN)
-			ccfg->encryption_type = 2;
-		else
-			ccfg->encryption_type = 1;
-
-		/* jal: always exclude unencrypted if WEP is active */
-		ccfg->exclude_unencrypted = 1;
-	} else {
-		ccfg->exclude_unencrypted = 0;
-		ccfg->encryption_type = 0;
-	}
-
-	ccfg->rts_threshold = cpu_to_le16(priv->rts_threshold);
-	ccfg->fragmentation_threshold = cpu_to_le16(priv->frag_threshold);
-
-	memcpy(ccfg->basic_rate_set, hw_rates, 4);
-	/* jal: really needed, we do a set_mib for autorate later ??? */
-	ccfg->auto_rate_fallback = (priv->txrate == TX_RATE_AUTO ? 1 : 0);
-	ccfg->channel = priv->channel;
-	ccfg->privacy_invoked = priv->wep_enabled;
-	memcpy(ccfg->current_ssid, priv->essid, IW_ESSID_MAX_SIZE);
-	ccfg->ssid_len = priv->essid_size;
-
-	ccfg->wep_default_key_id = priv->wep_key_id;
-	memcpy(ccfg->wep_default_key_value, priv->wep_keys, 4 * WEP_KEY_LEN);
-
-	ccfg->short_preamble = priv->preamble_type;
-	ccfg->beacon_period = cpu_to_le16(priv->beacon_period);
-
-	ret = at76_set_card_command(priv->udev, CMD_STARTUP, &priv->card_config,
-				    sizeof(struct at76_card_config));
-	if (ret < 0) {
-		printk(KERN_ERR "%s: at76_set_card_command failed: %d\n",
-		       priv->netdev->name, ret);
-		return ret;
-	}
-
-	at76_wait_completion(priv, CMD_STARTUP);
-
-	/* remove BSSID from previous run */
-	memset(priv->bssid, 0, ETH_ALEN);
-
-	if (at76_set_radio(priv, 1) == 1)
-		at76_wait_completion(priv, CMD_RADIO_ON);
-
-	ret = at76_set_preamble(priv, priv->preamble_type);
-	if (ret < 0)
-		return ret;
-
-	ret = at76_set_frag(priv, priv->frag_threshold);
-	if (ret < 0)
-		return ret;
-
-	ret = at76_set_rts(priv, priv->rts_threshold);
-	if (ret < 0)
-		return ret;
-
-	ret = at76_set_autorate_fallback(priv,
-					 priv->txrate == TX_RATE_AUTO ? 1 : 0);
-	if (ret < 0)
-		return ret;
-
-	ret = at76_set_pm_mode(priv);
-	if (ret < 0)
-		return ret;
-
-	if (at76_debug & DBG_MIB) {
-		at76_dump_mib_mac(priv);
-		at76_dump_mib_mac_addr(priv);
-		at76_dump_mib_mac_mgmt(priv);
-		at76_dump_mib_mac_wep(priv);
-		at76_dump_mib_mdomain(priv);
-		at76_dump_mib_phy(priv);
-		at76_dump_mib_local(priv);
-	}
-
-	return 0;
-}
-
-/* Restart the interface */
-static void at76_dwork_restart(struct work_struct *work)
-{
-	struct at76_priv *priv = container_of(work, struct at76_priv,
-					      dwork_restart.work);
-
-	mutex_lock(&priv->mtx);
-
-	netif_carrier_off(priv->netdev);	/* stop netdev watchdog */
-	netif_stop_queue(priv->netdev);	/* stop tx data packets */
-
-	at76_startup_device(priv);
-
-	if (priv->iw_mode != IW_MODE_MONITOR) {
-		priv->netdev->type = ARPHRD_ETHER;
-		at76_set_mac_state(priv, MAC_SCANNING);
-		schedule_work(&priv->work_start_scan);
-	} else {
-		priv->netdev->type = ARPHRD_IEEE80211_RADIOTAP;
-		at76_start_monitor(priv);
-	}
-
-	mutex_unlock(&priv->mtx);
-}
-
-/* Initiate scanning */
-static void at76_work_start_scan(struct work_struct *work)
-{
-	struct at76_priv *priv = container_of(work, struct at76_priv,
-					      work_start_scan);
-	int ret;
-
-	mutex_lock(&priv->mtx);
-
-	WARN_ON(priv->mac_state != MAC_SCANNING);
-	if (priv->mac_state != MAC_SCANNING)
-		goto exit;
-
-	/* only clear the bss list when a scan is actively initiated,
-	 * otherwise simply rely on at76_bss_list_timeout */
-	if (priv->scan_state == SCAN_IN_PROGRESS) {
-		at76_free_bss_list(priv);
-		priv->scan_need_any = 1;
-	} else
-		priv->scan_need_any = 0;
-
-	ret = at76_start_scan(priv, 1);
-
-	if (ret < 0)
-		printk(KERN_ERR "%s: %s: start_scan failed with %d\n",
-		       priv->netdev->name, __func__, ret);
-	else {
-		at76_dbg(DBG_MGMT_TIMER,
-			 "%s:%d: starting mgmt_timer for %d ticks",
-			 __func__, __LINE__, SCAN_POLL_INTERVAL);
-		schedule_delayed_work(&priv->dwork_get_scan,
-				      SCAN_POLL_INTERVAL);
-	}
-
-exit:
-	mutex_unlock(&priv->mtx);
-}
-
-/* Enable or disable promiscuous mode */
-static void at76_work_set_promisc(struct work_struct *work)
-{
-	struct at76_priv *priv = container_of(work, struct at76_priv,
-					      work_set_promisc);
-	int ret = 0;
-
-	mutex_lock(&priv->mtx);
-
-	priv->mib_buf.type = MIB_LOCAL;
-	priv->mib_buf.size = 1;
-	priv->mib_buf.index = offsetof(struct mib_local, promiscuous_mode);
-	priv->mib_buf.data.byte = priv->promisc ? 1 : 0;
-
-	ret = at76_set_mib(priv, &priv->mib_buf);
-	if (ret < 0)
-		printk(KERN_ERR "%s: set_mib (promiscuous_mode) failed: %d\n",
-		       priv->netdev->name, ret);
-
-	mutex_unlock(&priv->mtx);
-}
-
-/* Submit Rx urb back to the device */
-static void at76_work_submit_rx(struct work_struct *work)
-{
-	struct at76_priv *priv = container_of(work, struct at76_priv,
-					      work_submit_rx);
-
-	mutex_lock(&priv->mtx);
-	at76_submit_rx_urb(priv);
-	mutex_unlock(&priv->mtx);
-}
-
-/* We got an association response */
-static void at76_rx_mgmt_assoc(struct at76_priv *priv,
-			       struct at76_rx_buffer *buf)
-{
-	struct ieee80211_assoc_response *resp =
-	    (struct ieee80211_assoc_response *)buf->packet;
-	u16 assoc_id = le16_to_cpu(resp->aid);
-	u16 status = le16_to_cpu(resp->status);
-
-	at76_dbg(DBG_RX_MGMT, "%s: rx AssocResp bssid %pM capa 0x%04x status "
-		 "0x%04x assoc_id 0x%04x rates %s", priv->netdev->name,
-		 resp->header.addr3, le16_to_cpu(resp->capability),
-		 status, assoc_id, hex2str(resp->info_element->data,
-					   resp->info_element->len));
-
-	if (priv->mac_state != MAC_ASSOC) {
-		printk(KERN_INFO "%s: AssocResp in state %s ignored\n",
-		       priv->netdev->name, mac_states[priv->mac_state]);
-		return;
-	}
-
-	BUG_ON(!priv->curr_bss);
-
-	cancel_delayed_work(&priv->dwork_assoc);
-	if (status == WLAN_STATUS_SUCCESS) {
-		struct bss_info *ptr = priv->curr_bss;
-		priv->assoc_id = assoc_id & 0x3fff;
-		/* update iwconfig params */
-		memcpy(priv->bssid, ptr->bssid, ETH_ALEN);
-		memcpy(priv->essid, ptr->ssid, ptr->ssid_len);
-		priv->essid_size = ptr->ssid_len;
-		priv->channel = ptr->channel;
-		schedule_work(&priv->work_assoc_done);
-	} else {
-		at76_set_mac_state(priv, MAC_JOINING);
-		schedule_work(&priv->work_join);
-	}
-}
-
-/* Process disassociation request from the AP */
-static void at76_rx_mgmt_disassoc(struct at76_priv *priv,
-				  struct at76_rx_buffer *buf)
-{
-	struct ieee80211_disassoc *resp =
-	    (struct ieee80211_disassoc *)buf->packet;
-	struct ieee80211_hdr_3addr *mgmt = &resp->header;
-
-	at76_dbg(DBG_RX_MGMT,
-		 "%s: rx DisAssoc bssid %pM reason 0x%04x destination %pM",
-		 priv->netdev->name, mgmt->addr3,
-		 le16_to_cpu(resp->reason), mgmt->addr1);
-
-	/* We are not connected, ignore */
-	if (priv->mac_state == MAC_SCANNING || priv->mac_state == MAC_INIT
-	    || !priv->curr_bss)
-		return;
-
-	/* Not our BSSID, ignore */
-	if (compare_ether_addr(mgmt->addr3, priv->curr_bss->bssid))
-		return;
-
-	/* Not for our STA and not broadcast, ignore */
-	if (compare_ether_addr(priv->netdev->dev_addr, mgmt->addr1)
-	    && !is_broadcast_ether_addr(mgmt->addr1))
-		return;
-
-	if (priv->mac_state != MAC_ASSOC && priv->mac_state != MAC_CONNECTED
-	    && priv->mac_state != MAC_JOINING) {
-		printk(KERN_INFO "%s: DisAssoc in state %s ignored\n",
-		       priv->netdev->name, mac_states[priv->mac_state]);
-		return;
-	}
-
-	if (priv->mac_state == MAC_CONNECTED) {
-		netif_carrier_off(priv->netdev);
-		netif_stop_queue(priv->netdev);
-		at76_iwevent_bss_disconnect(priv->netdev);
-	}
-	cancel_delayed_work(&priv->dwork_get_scan);
-	cancel_delayed_work(&priv->dwork_beacon);
-	cancel_delayed_work(&priv->dwork_auth);
-	cancel_delayed_work(&priv->dwork_assoc);
-	at76_set_mac_state(priv, MAC_JOINING);
-	schedule_work(&priv->work_join);
-}
-
-static void at76_rx_mgmt_auth(struct at76_priv *priv,
-			      struct at76_rx_buffer *buf)
-{
-	struct ieee80211_auth *resp = (struct ieee80211_auth *)buf->packet;
-	struct ieee80211_hdr_3addr *mgmt = &resp->header;
-	int seq_nr = le16_to_cpu(resp->transaction);
-	int alg = le16_to_cpu(resp->algorithm);
-	int status = le16_to_cpu(resp->status);
-
-	at76_dbg(DBG_RX_MGMT,
-		 "%s: rx AuthFrame bssid %pM alg %d seq_nr %d status %d "
-		 "destination %pM", priv->netdev->name, mgmt->addr3,
-		 alg, seq_nr, status, mgmt->addr1);
-
-	if (alg == WLAN_AUTH_SHARED_KEY && seq_nr == 2)
-		at76_dbg(DBG_RX_MGMT, "%s: AuthFrame challenge %s ...",
-			 priv->netdev->name, hex2str(resp->info_element, 18));
-
-	if (priv->mac_state != MAC_AUTH) {
-		printk(KERN_INFO "%s: ignored AuthFrame in state %s\n",
-		       priv->netdev->name, mac_states[priv->mac_state]);
-		return;
-	}
-	if (priv->auth_mode != alg) {
-		printk(KERN_INFO "%s: ignored AuthFrame for alg %d\n",
-		       priv->netdev->name, alg);
-		return;
-	}
-
-	BUG_ON(!priv->curr_bss);
-
-	/* Not our BSSID or not for our STA, ignore */
-	if (compare_ether_addr(mgmt->addr3, priv->curr_bss->bssid)
-	    || compare_ether_addr(priv->netdev->dev_addr, mgmt->addr1))
-		return;
-
-	cancel_delayed_work(&priv->dwork_auth);
-	if (status != WLAN_STATUS_SUCCESS) {
-		/* try to join next bss */
-		at76_set_mac_state(priv, MAC_JOINING);
-		schedule_work(&priv->work_join);
-		return;
-	}
-
-	if (priv->auth_mode == WLAN_AUTH_OPEN || seq_nr == 4) {
-		priv->retries = ASSOC_RETRIES;
-		at76_set_mac_state(priv, MAC_ASSOC);
-		at76_assoc_req(priv, priv->curr_bss);
-		at76_dbg(DBG_MGMT_TIMER,
-			 "%s:%d: starting mgmt_timer + HZ", __func__, __LINE__);
-		schedule_delayed_work(&priv->dwork_assoc, ASSOC_TIMEOUT);
-		return;
-	}
-
-	WARN_ON(seq_nr != 2);
-	at76_auth_req(priv, priv->curr_bss, seq_nr + 1, resp->info_element);
-	at76_dbg(DBG_MGMT_TIMER, "%s:%d: starting mgmt_timer + HZ", __func__,
-		 __LINE__);
-	schedule_delayed_work(&priv->dwork_auth, AUTH_TIMEOUT);
-}
-
-static void at76_rx_mgmt_deauth(struct at76_priv *priv,
-				struct at76_rx_buffer *buf)
-{
-	struct ieee80211_disassoc *resp =
-	    (struct ieee80211_disassoc *)buf->packet;
-	struct ieee80211_hdr_3addr *mgmt = &resp->header;
-
-	at76_dbg(DBG_RX_MGMT | DBG_PROGRESS,
-		 "%s: rx DeAuth bssid %pM reason 0x%04x destination %pM",
-		 priv->netdev->name, mgmt->addr3,
-		 le16_to_cpu(resp->reason), mgmt->addr1);
-
-	if (priv->mac_state != MAC_AUTH && priv->mac_state != MAC_ASSOC
-	    && priv->mac_state != MAC_CONNECTED) {
-		printk(KERN_INFO "%s: DeAuth in state %s ignored\n",
-		       priv->netdev->name, mac_states[priv->mac_state]);
-		return;
-	}
-
-	BUG_ON(!priv->curr_bss);
-
-	/* Not our BSSID, ignore */
-	if (compare_ether_addr(mgmt->addr3, priv->curr_bss->bssid))
-		return;
-
-	/* Not for our STA and not broadcast, ignore */
-	if (compare_ether_addr(priv->netdev->dev_addr, mgmt->addr1)
-	    && !is_broadcast_ether_addr(mgmt->addr1))
-		return;
-
-	if (priv->mac_state == MAC_CONNECTED)
-		at76_iwevent_bss_disconnect(priv->netdev);
-
-	at76_set_mac_state(priv, MAC_JOINING);
-	schedule_work(&priv->work_join);
-	cancel_delayed_work(&priv->dwork_get_scan);
-	cancel_delayed_work(&priv->dwork_beacon);
-	cancel_delayed_work(&priv->dwork_auth);
-	cancel_delayed_work(&priv->dwork_assoc);
-}
-
-static void at76_rx_mgmt_beacon(struct at76_priv *priv,
-				struct at76_rx_buffer *buf)
-{
-	int varpar_len;
-	/* beacon content */
-	struct ieee80211_beacon *bdata = (struct ieee80211_beacon *)buf->packet;
-	struct ieee80211_hdr_3addr *mgmt = &bdata->header;
-
-	struct list_head *lptr;
-	struct bss_info *match;	/* entry matching addr3 with its bssid */
-	int new_entry = 0;
-	int len;
-	struct ieee80211_info_element *ie;
-	int have_ssid = 0;
-	int have_rates = 0;
-	int have_channel = 0;
-	int keep_going = 1;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->bss_list_spinlock, flags);
-	if (priv->mac_state == MAC_CONNECTED) {
-		/* in state MAC_CONNECTED we use the mgmt_timer to control
-		   the beacon of the BSS */
-		BUG_ON(!priv->curr_bss);
-
-		if (!compare_ether_addr(priv->curr_bss->bssid, mgmt->addr3)) {
-			/* We got our AP's beacon, defer the timeout handler.
-			   Kill pending work first, as schedule_delayed_work()
-			   won't do it. */
-			cancel_delayed_work(&priv->dwork_beacon);
-			schedule_delayed_work(&priv->dwork_beacon,
-					      BEACON_TIMEOUT);
-			priv->curr_bss->rssi = buf->rssi;
-			priv->beacons_received++;
-			goto exit;
-		}
-	}
-
-	/* look if we have this BSS already in the list */
-	match = NULL;
-
-	if (!list_empty(&priv->bss_list)) {
-		list_for_each(lptr, &priv->bss_list) {
-			struct bss_info *bss_ptr =
-			    list_entry(lptr, struct bss_info, list);
-			if (!compare_ether_addr(bss_ptr->bssid, mgmt->addr3)) {
-				match = bss_ptr;
-				break;
-			}
-		}
-	}
-
-	if (!match) {
-		/* BSS not in the list - append it */
-		match = kzalloc(sizeof(struct bss_info), GFP_ATOMIC);
-		if (!match) {
-			at76_dbg(DBG_BSS_TABLE,
-				 "%s: cannot kmalloc new bss info (%zd byte)",
-				 priv->netdev->name, sizeof(struct bss_info));
-			goto exit;
-		}
-		new_entry = 1;
-		list_add_tail(&match->list, &priv->bss_list);
-	}
-
-	match->capa = le16_to_cpu(bdata->capability);
-	match->beacon_interval = le16_to_cpu(bdata->beacon_interval);
-	match->rssi = buf->rssi;
-	match->link_qual = buf->link_quality;
-	match->noise_level = buf->noise_level;
-	memcpy(match->bssid, mgmt->addr3, ETH_ALEN);
-	at76_dbg(DBG_RX_BEACON, "%s: bssid %pM", priv->netdev->name,
-		 match->bssid);
-
-	ie = bdata->info_element;
-
-	/* length of var length beacon parameters */
-	varpar_len = min_t(int, le16_to_cpu(buf->wlength) -
-			   sizeof(struct ieee80211_beacon),
-			   BEACON_MAX_DATA_LENGTH);
-
-	/* This routine steps through the bdata->data array to get
-	 * some useful information about the access point.
-	 * Currently, this implementation supports receipt of: SSID,
-	 * supported transfer rates and channel, in any order, with some
-	 * tolerance for intermittent unknown codes (although this
-	 * functionality may not be necessary as the useful information will
-	 * usually arrive in consecutively, but there have been some
-	 * reports of some of the useful information fields arriving in a
-	 * different order).
-	 * It does not support any more IE types although MFIE_TYPE_TIM may
-	 * be supported (on my AP at least).
-	 * The bdata->data array is about 1500 bytes long but only ~36 of those
-	 * bytes are useful, hence the have_ssid etc optimizations. */
-
-	while (keep_going &&
-	       ((&ie->data[ie->len] - (u8 *)bdata->info_element) <=
-		varpar_len)) {
-
-		switch (ie->id) {
-
-		case WLAN_EID_SSID:
-			if (have_ssid)
-				break;
-
-			len = min_t(int, IW_ESSID_MAX_SIZE, ie->len);
-
-			/* we copy only if this is a new entry,
-			   or the incoming SSID is not a hidden SSID. This
-			   will protect us from overwriting a real SSID read
-			   in a ProbeResponse with a hidden one from a
-			   following beacon. */
-			if (!new_entry && at76_is_hidden_ssid(ie->data, len)) {
-				have_ssid = 1;
-				break;
-			}
-
-			match->ssid_len = len;
-			memcpy(match->ssid, ie->data, len);
-			at76_dbg(DBG_RX_BEACON, "%s: SSID - %.*s",
-				 priv->netdev->name, len, match->ssid);
-			have_ssid = 1;
-			break;
-
-		case WLAN_EID_SUPP_RATES:
-			if (have_rates)
-				break;
-
-			match->rates_len =
-			    min_t(int, sizeof(match->rates), ie->len);
-			memcpy(match->rates, ie->data, match->rates_len);
-			have_rates = 1;
-			at76_dbg(DBG_RX_BEACON, "%s: SUPPORTED RATES %s",
-				 priv->netdev->name,
-				 hex2str(ie->data, ie->len));
-			break;
-
-		case WLAN_EID_DS_PARAMS:
-			if (have_channel)
-				break;
-
-			match->channel = ie->data[0];
-			have_channel = 1;
-			at76_dbg(DBG_RX_BEACON, "%s: CHANNEL - %d",
-				 priv->netdev->name, match->channel);
-			break;
-
-		case WLAN_EID_CF_PARAMS:
-		case WLAN_EID_TIM:
-		case WLAN_EID_IBSS_PARAMS:
-		default:
-			at76_dbg(DBG_RX_BEACON, "%s: beacon IE id %d len %d %s",
-				 priv->netdev->name, ie->id, ie->len,
-				 hex2str(ie->data, ie->len));
-			break;
-		}
-
-		/* advance to the next informational element */
-		next_ie(&ie);
-
-		/* Optimization: after all, the bdata->data array is
-		 * varpar_len bytes long, whereas we get all of the useful
-		 * information after only ~36 bytes, this saves us a lot of
-		 * time (and trouble as the remaining portion of the array
-		 * could be full of junk)
-		 * Comment this out if you want to see what other information
-		 * comes from the AP - although little of it may be useful */
-	}
-
-	at76_dbg(DBG_RX_BEACON, "%s: Finished processing beacon data",
-		 priv->netdev->name);
-
-	match->last_rx = jiffies;	/* record last rx of beacon */
-
-exit:
-	spin_unlock_irqrestore(&priv->bss_list_spinlock, flags);
-}
-
-/* Calculate the link level from a given rx_buffer */
-static void at76_calc_level(struct at76_priv *priv, struct at76_rx_buffer *buf,
-			    struct iw_quality *qual)
-{
-	/* just a guess for now, might be different for other chips */
-	int max_rssi = 42;
-
-	qual->level = (buf->rssi * 100 / max_rssi);
-	if (qual->level > 100)
-		qual->level = 100;
-	qual->updated |= IW_QUAL_LEVEL_UPDATED;
-}
-
-/* Calculate the link quality from a given rx_buffer */
-static void at76_calc_qual(struct at76_priv *priv, struct at76_rx_buffer *buf,
-			   struct iw_quality *qual)
-{
-	if (at76_is_intersil(priv->board_type))
-		qual->qual = buf->link_quality;
-	else {
-		unsigned long elapsed;
-
-		/* Update qual at most once a second */
-		elapsed = jiffies - priv->beacons_last_qual;
-		if (elapsed < 1 * HZ)
-			return;
-
-		qual->qual = qual->level * priv->beacons_received *
-		    msecs_to_jiffies(priv->beacon_period) / elapsed;
-
-		priv->beacons_last_qual = jiffies;
-		priv->beacons_received = 0;
-	}
-	qual->qual = (qual->qual > 100) ? 100 : qual->qual;
-	qual->updated |= IW_QUAL_QUAL_UPDATED;
-}
-
-/* Calculate the noise quality from a given rx_buffer */
-static void at76_calc_noise(struct at76_priv *priv, struct at76_rx_buffer *buf,
-			    struct iw_quality *qual)
-{
-	qual->noise = 0;
-	qual->updated |= IW_QUAL_NOISE_INVALID;
-}
-
-static void at76_update_wstats(struct at76_priv *priv,
-			       struct at76_rx_buffer *buf)
-{
-	struct iw_quality *qual = &priv->wstats.qual;
-
-	if (buf->rssi && priv->mac_state == MAC_CONNECTED) {
-		qual->updated = 0;
-		at76_calc_level(priv, buf, qual);
-		at76_calc_qual(priv, buf, qual);
-		at76_calc_noise(priv, buf, qual);
-	} else {
-		qual->qual = 0;
-		qual->level = 0;
-		qual->noise = 0;
-		qual->updated = IW_QUAL_ALL_INVALID;
-	}
-}
-
-static void at76_rx_mgmt(struct at76_priv *priv, struct at76_rx_buffer *buf)
-{
-	struct ieee80211_hdr_3addr *mgmt =
-	    (struct ieee80211_hdr_3addr *)buf->packet;
-	u16 framectl = le16_to_cpu(mgmt->frame_ctl);
-
-	/* update wstats */
-	if (priv->mac_state != MAC_INIT && priv->mac_state != MAC_SCANNING) {
-		/* jal: this is a dirty hack needed by Tim in ad-hoc mode */
-		/* Data packets always seem to have a 0 link level, so we
-		   only read link quality info from management packets.
-		   Atmel driver actually averages the present, and previous
-		   values, we just present the raw value at the moment - TJS */
-		if (priv->iw_mode == IW_MODE_ADHOC
-		    || (priv->curr_bss
-			&& !compare_ether_addr(mgmt->addr3,
-					       priv->curr_bss->bssid)))
-			at76_update_wstats(priv, buf);
-	}
-
-	at76_dbg(DBG_RX_MGMT_CONTENT, "%s rx mgmt framectl 0x%x %s",
-		 priv->netdev->name, framectl,
-		 hex2str(mgmt, le16_to_cpu(buf->wlength)));
-
-	switch (framectl & IEEE80211_FCTL_STYPE) {
-	case IEEE80211_STYPE_BEACON:
-	case IEEE80211_STYPE_PROBE_RESP:
-		at76_rx_mgmt_beacon(priv, buf);
-		break;
-
-	case IEEE80211_STYPE_ASSOC_RESP:
-		at76_rx_mgmt_assoc(priv, buf);
-		break;
-
-	case IEEE80211_STYPE_DISASSOC:
-		at76_rx_mgmt_disassoc(priv, buf);
-		break;
-
-	case IEEE80211_STYPE_AUTH:
-		at76_rx_mgmt_auth(priv, buf);
-		break;
-
-	case IEEE80211_STYPE_DEAUTH:
-		at76_rx_mgmt_deauth(priv, buf);
-		break;
-
-	default:
-		printk(KERN_DEBUG "%s: ignoring frame with framectl 0x%04x\n",
-		       priv->netdev->name, framectl);
-	}
-
-	return;
-}
-
-/* Convert the 802.11 header into an ethernet-style header, make skb
- * ready for consumption by netif_rx() */
-static void at76_ieee80211_to_eth(struct sk_buff *skb, int iw_mode)
-{
-	struct ieee80211_hdr_3addr *i802_11_hdr;
-	struct ethhdr *eth_hdr_p;
-	u8 *src_addr;
-	u8 *dest_addr;
-
-	i802_11_hdr = (struct ieee80211_hdr_3addr *)skb->data;
-
-	/* That would be the ethernet header if the hardware converted
-	 * the frame for us.  Make sure the source and the destination
-	 * match the 802.11 header.  Which hardware does it? */
-	eth_hdr_p = (struct ethhdr *)skb_pull(skb, IEEE80211_3ADDR_LEN);
-
-	dest_addr = i802_11_hdr->addr1;
-	if (iw_mode == IW_MODE_ADHOC)
-		src_addr = i802_11_hdr->addr2;
-	else
-		src_addr = i802_11_hdr->addr3;
-
-	if (!compare_ether_addr(eth_hdr_p->h_source, src_addr) &&
-	    !compare_ether_addr(eth_hdr_p->h_dest, dest_addr))
-		/* Yes, we already have an ethernet header */
-		skb_reset_mac_header(skb);
-	else {
-		u16 len;
-
-		/* Need to build an ethernet header */
-		if (!memcmp(skb->data, snapsig, sizeof(snapsig))) {
-			/* SNAP frame - decapsulate, keep proto */
-			skb_push(skb, offsetof(struct ethhdr, h_proto) -
-				 sizeof(rfc1042sig));
-			len = 0;
-		} else {
-			/* 802.3 frame, proto is length */
-			len = skb->len;
-			skb_push(skb, ETH_HLEN);
-		}
-
-		skb_reset_mac_header(skb);
-		eth_hdr_p = eth_hdr(skb);
-		/* This needs to be done in this order (eth_hdr_p->h_dest may
-		 * overlap src_addr) */
-		memcpy(eth_hdr_p->h_source, src_addr, ETH_ALEN);
-		memcpy(eth_hdr_p->h_dest, dest_addr, ETH_ALEN);
-		if (len)
-			eth_hdr_p->h_proto = htons(len);
-	}
-
-	skb->protocol = eth_type_trans(skb, skb->dev);
-}
-
-/* Check for fragmented data in priv->rx_skb. If the packet was no fragment
-   or it was the last of a fragment set a skb containing the whole packet
-   is returned for further processing. Otherwise we get NULL and are
-   done and the packet is either stored inside the fragment buffer
-   or thrown away.  Every returned skb starts with the ieee802_11 header
-   and contains _no_ FCS at the end */
-static struct sk_buff *at76_check_for_rx_frags(struct at76_priv *priv)
-{
-	struct sk_buff *skb = priv->rx_skb;
-	struct at76_rx_buffer *buf = (struct at76_rx_buffer *)skb->data;
-	struct ieee80211_hdr_3addr *i802_11_hdr =
-	    (struct ieee80211_hdr_3addr *)buf->packet;
-	/* seq_ctrl, fragment_number, sequence number of new packet */
-	u16 sctl = le16_to_cpu(i802_11_hdr->seq_ctl);
-	u16 fragnr = sctl & 0xf;
-	u16 seqnr = sctl >> 4;
-	u16 frame_ctl = le16_to_cpu(i802_11_hdr->frame_ctl);
-
-	/* Length including the IEEE802.11 header, but without the trailing
-	 * FCS and without the Atmel Rx header */
-	int length = le16_to_cpu(buf->wlength) - IEEE80211_FCS_LEN;
-
-	/* where does the data payload start in skb->data ? */
-	u8 *data = i802_11_hdr->payload;
-
-	/* length of payload, excl. the trailing FCS */
-	int data_len = length - IEEE80211_3ADDR_LEN;
-
-	int i;
-	struct rx_data_buf *bptr, *optr;
-	unsigned long oldest = ~0UL;
-
-	at76_dbg(DBG_RX_FRAGS,
-		 "%s: rx data frame_ctl %04x addr2 %pM seq/frag %d/%d "
-		 "length %d data %d: %s ...", priv->netdev->name, frame_ctl,
-		 i802_11_hdr->addr2, seqnr, fragnr, length, data_len,
-		 hex2str(data, 32));
-
-	at76_dbg(DBG_RX_FRAGS_SKB, "%s: incoming skb: head %p data %p "
-		 "tail %p end %p len %d", priv->netdev->name, skb->head,
-		 skb->data, skb_tail_pointer(skb), skb_end_pointer(skb),
-		 skb->len);
-
-	if (data_len < 0) {
-		/* make sure data starts in the buffer */
-		printk(KERN_INFO "%s: data frame too short\n",
-		       priv->netdev->name);
-		return NULL;
-	}
-
-	WARN_ON(length <= AT76_RX_HDRLEN);
-	if (length <= AT76_RX_HDRLEN)
-		return NULL;
-
-	/* remove the at76_rx_buffer header - we don't need it anymore */
-	/* we need the IEEE802.11 header (for the addresses) if this packet
-	   is the first of a chain */
-	skb_pull(skb, AT76_RX_HDRLEN);
-
-	/* remove FCS at end */
-	skb_trim(skb, length);
-
-	at76_dbg(DBG_RX_FRAGS_SKB, "%s: trimmed skb: head %p data %p tail %p "
-		 "end %p len %d data %p data_len %d", priv->netdev->name,
-		 skb->head, skb->data, skb_tail_pointer(skb),
-		 skb_end_pointer(skb), skb->len, data, data_len);
-
-	if (fragnr == 0 && !(frame_ctl & IEEE80211_FCTL_MOREFRAGS)) {
-		/* unfragmented packet received */
-		/* Use a new skb for the next receive */
-		priv->rx_skb = NULL;
-		at76_dbg(DBG_RX_FRAGS, "%s: unfragmented", priv->netdev->name);
-		return skb;
-	}
-
-	/* look if we've got a chain for the sender address.
-	   afterwards optr points to first free or the oldest entry,
-	   or, if i < NR_RX_DATA_BUF, bptr points to the entry for the
-	   sender address */
-	/* determining the oldest entry doesn't cope with jiffies wrapping
-	   but I don't care to delete a young entry at these rare moments ... */
-
-	bptr = priv->rx_data;
-	optr = NULL;
-	for (i = 0; i < NR_RX_DATA_BUF; i++, bptr++) {
-		if (!bptr->skb) {
-			optr = bptr;
-			oldest = 0UL;
-			continue;
-		}
-
-		if (!compare_ether_addr(i802_11_hdr->addr2, bptr->sender))
-			break;
-
-		if (!optr) {
-			optr = bptr;
-			oldest = bptr->last_rx;
-		} else if (bptr->last_rx < oldest)
-			optr = bptr;
-	}
-
-	if (i < NR_RX_DATA_BUF) {
-
-		at76_dbg(DBG_RX_FRAGS, "%s: %d. cacheentry (seq/frag = %d/%d) "
-			 "matched sender addr",
-			 priv->netdev->name, i, bptr->seqnr, bptr->fragnr);
-
-		/* bptr points to an entry for the sender address */
-		if (bptr->seqnr == seqnr) {
-			int left;
-			/* the fragment has the current sequence number */
-			if (((bptr->fragnr + 1) & 0xf) != fragnr) {
-				/* wrong fragment number -> ignore it */
-				/* is & 0xf necessary above ??? */
-				at76_dbg(DBG_RX_FRAGS,
-					 "%s: frag nr mismatch: %d + 1 != %d",
-					 priv->netdev->name, bptr->fragnr,
-					 fragnr);
-				return NULL;
-			}
-			bptr->last_rx = jiffies;
-			/* the next following fragment number ->
-			   add the data at the end */
-
-			/* for test only ??? */
-			left = skb_tailroom(bptr->skb);
-			if (left < data_len)
-				printk(KERN_INFO
-				       "%s: only %d byte free (need %d)\n",
-				       priv->netdev->name, left, data_len);
-			else
-				memcpy(skb_put(bptr->skb, data_len), data,
-				       data_len);
-
-			bptr->fragnr = fragnr;
-			if (frame_ctl & IEEE80211_FCTL_MOREFRAGS)
-				return NULL;
-
-			/* this was the last fragment - send it */
-			skb = bptr->skb;
-			bptr->skb = NULL;	/* free the entry */
-			at76_dbg(DBG_RX_FRAGS, "%s: last frag of seq %d",
-				 priv->netdev->name, seqnr);
-			return skb;
-		}
-
-		/* got another sequence number */
-		if (fragnr == 0) {
-			/* it's the start of a new chain - replace the
-			   old one by this */
-			/* bptr->sender has the correct value already */
-			at76_dbg(DBG_RX_FRAGS,
-				 "%s: start of new seq %d, removing old seq %d",
-				 priv->netdev->name, seqnr, bptr->seqnr);
-			bptr->seqnr = seqnr;
-			bptr->fragnr = 0;
-			bptr->last_rx = jiffies;
-			/* swap bptr->skb and priv->rx_skb */
-			skb = bptr->skb;
-			bptr->skb = priv->rx_skb;
-			priv->rx_skb = skb;
-		} else {
-			/* it from the middle of a new chain ->
-			   delete the old entry and skip the new one */
-			at76_dbg(DBG_RX_FRAGS,
-				 "%s: middle of new seq %d (%d) "
-				 "removing old seq %d",
-				 priv->netdev->name, seqnr, fragnr,
-				 bptr->seqnr);
-			dev_kfree_skb(bptr->skb);
-			bptr->skb = NULL;
-		}
-		return NULL;
-	}
-
-	/* if we didn't find a chain for the sender address, optr
-	   points either to the first free or the oldest entry */
-
-	if (fragnr != 0) {
-		/* this is not the begin of a fragment chain ... */
-		at76_dbg(DBG_RX_FRAGS,
-			 "%s: no chain for non-first fragment (%d)",
-			 priv->netdev->name, fragnr);
-		return NULL;
-	}
-
-	BUG_ON(!optr);
-	if (optr->skb) {
-		/* swap the skb's */
-		skb = optr->skb;
-		optr->skb = priv->rx_skb;
-		priv->rx_skb = skb;
-
-		at76_dbg(DBG_RX_FRAGS,
-			 "%s: free old contents: sender %pM seq/frag %d/%d",
-			 priv->netdev->name, optr->sender,
-			 optr->seqnr, optr->fragnr);
-
-	} else {
-		/* take the skb from priv->rx_skb */
-		optr->skb = priv->rx_skb;
-		/* let at76_submit_rx_urb() allocate a new skb */
-		priv->rx_skb = NULL;
-
-		at76_dbg(DBG_RX_FRAGS, "%s: use a free entry",
-			 priv->netdev->name);
-	}
-	memcpy(optr->sender, i802_11_hdr->addr2, ETH_ALEN);
-	optr->seqnr = seqnr;
-	optr->fragnr = 0;
-	optr->last_rx = jiffies;
-
-	return NULL;
-}
-
-/* Rx interrupt: we expect the complete data buffer in priv->rx_skb */
-static void at76_rx_data(struct at76_priv *priv)
-{
-	struct net_device *netdev = priv->netdev;
-	struct net_device_stats *stats = &priv->stats;
-	struct sk_buff *skb = priv->rx_skb;
-	struct at76_rx_buffer *buf = (struct at76_rx_buffer *)skb->data;
-	struct ieee80211_hdr_3addr *i802_11_hdr;
-	int length = le16_to_cpu(buf->wlength);
-
-	at76_dbg(DBG_RX_DATA, "%s received data packet: %s", netdev->name,
-		 hex2str(skb->data, AT76_RX_HDRLEN));
-
-	at76_dbg(DBG_RX_DATA_CONTENT, "rx packet: %s",
-		 hex2str(skb->data + AT76_RX_HDRLEN, length));
-
-	skb = at76_check_for_rx_frags(priv);
-	if (!skb)
-		return;
-
-	/* Atmel header and the FCS are already removed */
-	i802_11_hdr = (struct ieee80211_hdr_3addr *)skb->data;
-
-	skb->dev = netdev;
-	skb->ip_summed = CHECKSUM_NONE;	/* TODO: should check CRC */
-
-	if (is_broadcast_ether_addr(i802_11_hdr->addr1)) {
-		if (!compare_ether_addr(i802_11_hdr->addr1, netdev->broadcast))
-			skb->pkt_type = PACKET_BROADCAST;
-		else
-			skb->pkt_type = PACKET_MULTICAST;
-	} else if (compare_ether_addr(i802_11_hdr->addr1, netdev->dev_addr))
-		skb->pkt_type = PACKET_OTHERHOST;
-
-	at76_ieee80211_to_eth(skb, priv->iw_mode);
-
-	netdev->last_rx = jiffies;
-	netif_rx(skb);
-	stats->rx_packets++;
-	stats->rx_bytes += length;
-
-	return;
-}
-
-static void at76_rx_monitor_mode(struct at76_priv *priv)
-{
-	struct at76_rx_radiotap *rt;
-	u8 *payload;
-	int skblen;
-	struct net_device *netdev = priv->netdev;
-	struct at76_rx_buffer *buf =
-	    (struct at76_rx_buffer *)priv->rx_skb->data;
-	/* length including the IEEE802.11 header and the trailing FCS,
-	   but not at76_rx_buffer */
-	int length = le16_to_cpu(buf->wlength);
-	struct sk_buff *skb = priv->rx_skb;
-	struct net_device_stats *stats = &priv->stats;
-
-	if (length < IEEE80211_FCS_LEN) {
-		/* buffer contains no data */
-		at76_dbg(DBG_MONITOR_MODE,
-			 "%s: MONITOR MODE: rx skb without data",
-			 priv->netdev->name);
-		return;
-	}
-
-	skblen = sizeof(struct at76_rx_radiotap) + length;
-
-	skb = dev_alloc_skb(skblen);
-	if (!skb) {
-		printk(KERN_ERR "%s: MONITOR MODE: dev_alloc_skb for radiotap "
-		       "header returned NULL\n", priv->netdev->name);
-		return;
-	}
-
-	skb_put(skb, skblen);
-
-	rt = (struct at76_rx_radiotap *)skb->data;
-	payload = skb->data + sizeof(struct at76_rx_radiotap);
-
-	rt->rt_hdr.it_version = 0;
-	rt->rt_hdr.it_pad = 0;
-	rt->rt_hdr.it_len = cpu_to_le16(sizeof(struct at76_rx_radiotap));
-	rt->rt_hdr.it_present = cpu_to_le32(AT76_RX_RADIOTAP_PRESENT);
-
-	rt->rt_tsft = cpu_to_le64(le32_to_cpu(buf->rx_time));
-	rt->rt_rate = hw_rates[buf->rx_rate] & (~0x80);
-	rt->rt_signal = buf->rssi;
-	rt->rt_noise = buf->noise_level;
-	rt->rt_flags = IEEE80211_RADIOTAP_F_FCS;
-	if (buf->fragmentation)
-		rt->rt_flags |= IEEE80211_RADIOTAP_F_FRAG;
-
-	memcpy(payload, buf->packet, length);
-	skb->dev = netdev;
-	skb->ip_summed = CHECKSUM_NONE;
-	skb_reset_mac_header(skb);
-	skb->pkt_type = PACKET_OTHERHOST;
-	skb->protocol = htons(ETH_P_802_2);
-
-	netdev->last_rx = jiffies;
-	netif_rx(skb);
-	stats->rx_packets++;
-	stats->rx_bytes += length;
-}
-
-/* Check if we spy on the sender address in buf and update stats */
-static void at76_iwspy_update(struct at76_priv *priv,
-			      struct at76_rx_buffer *buf)
-{
-	struct ieee80211_hdr_3addr *hdr =
-	    (struct ieee80211_hdr_3addr *)buf->packet;
-	struct iw_quality qual;
-
-	/* We can only set the level here */
-	qual.updated = IW_QUAL_QUAL_INVALID | IW_QUAL_NOISE_INVALID;
-	qual.level = 0;
-	qual.noise = 0;
-	at76_calc_level(priv, buf, &qual);
-
-	spin_lock_bh(&priv->spy_spinlock);
-
-	if (priv->spy_data.spy_number > 0)
-		wireless_spy_update(priv->netdev, hdr->addr2, &qual);
-
-	spin_unlock_bh(&priv->spy_spinlock);
-}
-
-static void at76_rx_tasklet(unsigned long param)
-{
-	struct urb *urb = (struct urb *)param;
-	struct at76_priv *priv = urb->context;
-	struct net_device *netdev = priv->netdev;
-	struct at76_rx_buffer *buf;
-	struct ieee80211_hdr_3addr *i802_11_hdr;
-	u16 frame_ctl;
-
-	if (priv->device_unplugged) {
-		at76_dbg(DBG_DEVSTART, "device unplugged");
-		if (urb)
-			at76_dbg(DBG_DEVSTART, "urb status %d", urb->status);
-		return;
-	}
-
-	if (!priv->rx_skb || !netdev || !priv->rx_skb->data)
-		return;
-
-	buf = (struct at76_rx_buffer *)priv->rx_skb->data;
-
-	i802_11_hdr = (struct ieee80211_hdr_3addr *)buf->packet;
-
-	frame_ctl = le16_to_cpu(i802_11_hdr->frame_ctl);
-
-	if (urb->status != 0) {
-		if (urb->status != -ENOENT && urb->status != -ECONNRESET)
-			at76_dbg(DBG_URB,
-				 "%s %s: - nonzero Rx bulk status received: %d",
-				 __func__, netdev->name, urb->status);
-		return;
-	}
-
-	at76_dbg(DBG_RX_ATMEL_HDR,
-		 "%s: rx frame: rate %d rssi %d noise %d link %d %s",
-		 priv->netdev->name, buf->rx_rate, buf->rssi, buf->noise_level,
-		 buf->link_quality, hex2str(i802_11_hdr, 48));
-	if (priv->iw_mode == IW_MODE_MONITOR) {
-		at76_rx_monitor_mode(priv);
-		goto exit;
-	}
-
-	/* there is a new bssid around, accept it: */
-	if (buf->newbss && priv->iw_mode == IW_MODE_ADHOC) {
-		at76_dbg(DBG_PROGRESS, "%s: rx newbss", netdev->name);
-		schedule_work(&priv->work_new_bss);
-	}
-
-	switch (frame_ctl & IEEE80211_FCTL_FTYPE) {
-	case IEEE80211_FTYPE_DATA:
-		at76_rx_data(priv);
-		break;
-
-	case IEEE80211_FTYPE_MGMT:
-		/* jal: TODO: find out if we can update iwspy also on
-		   other frames than management (might depend on the
-		   radio chip / firmware version !) */
-
-		at76_iwspy_update(priv, buf);
-
-		at76_rx_mgmt(priv, buf);
-		break;
-
-	case IEEE80211_FTYPE_CTL:
-		at76_dbg(DBG_RX_CTRL, "%s: ignored ctrl frame: %04x",
-			 priv->netdev->name, frame_ctl);
-		break;
-
-	default:
-		printk(KERN_DEBUG "%s: ignoring frame with framectl 0x%04x\n",
-		       priv->netdev->name, frame_ctl);
-	}
-exit:
-	at76_submit_rx_urb(priv);
-}
-
-/* Load firmware into kernel memory and parse it */
-static struct fwentry *at76_load_firmware(struct usb_device *udev,
-					  enum board_type board_type)
-{
-	int ret;
-	char *str;
-	struct at76_fw_header *fwh;
-	struct fwentry *fwe = &firmwares[board_type];
-
-	mutex_lock(&fw_mutex);
-
-	if (fwe->loaded) {
-		at76_dbg(DBG_FW, "re-using previously loaded fw");
-		goto exit;
-	}
-
-	at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname);
-	ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev);
-	if (ret < 0) {
-		dev_printk(KERN_ERR, &udev->dev, "firmware %s not found!\n",
-			   fwe->fwname);
-		dev_printk(KERN_ERR, &udev->dev,
-			   "you may need to download the firmware from "
-			   "http://developer.berlios.de/projects/at76c503a/";);
-		goto exit;
-	}
-
-	at76_dbg(DBG_FW, "got it.");
-	fwh = (struct at76_fw_header *)(fwe->fw->data);
-
-	if (fwe->fw->size <= sizeof(*fwh)) {
-		dev_printk(KERN_ERR, &udev->dev,
-			   "firmware is too short (0x%zx)\n", fwe->fw->size);
-		goto exit;
-	}
-
-	/* CRC currently not checked */
-	fwe->board_type = le32_to_cpu(fwh->board_type);
-	if (fwe->board_type != board_type) {
-		dev_printk(KERN_ERR, &udev->dev,
-			   "board type mismatch, requested %u, got %u\n",
-			   board_type, fwe->board_type);
-		goto exit;
-	}
-
-	fwe->fw_version.major = fwh->major;
-	fwe->fw_version.minor = fwh->minor;
-	fwe->fw_version.patch = fwh->patch;
-	fwe->fw_version.build = fwh->build;
-
-	str = (char *)fwh + le32_to_cpu(fwh->str_offset);
-	fwe->intfw = (u8 *)fwh + le32_to_cpu(fwh->int_fw_offset);
-	fwe->intfw_size = le32_to_cpu(fwh->int_fw_len);
-	fwe->extfw = (u8 *)fwh + le32_to_cpu(fwh->ext_fw_offset);
-	fwe->extfw_size = le32_to_cpu(fwh->ext_fw_len);
-
-	fwe->loaded = 1;
-
-	dev_printk(KERN_DEBUG, &udev->dev,
-		   "using firmware %s (version %d.%d.%d-%d)\n",
-		   fwe->fwname, fwh->major, fwh->minor, fwh->patch, fwh->build);
-
-	at76_dbg(DBG_DEVSTART, "board %u, int %d:%d, ext %d:%d", board_type,
-		 le32_to_cpu(fwh->int_fw_offset), le32_to_cpu(fwh->int_fw_len),
-		 le32_to_cpu(fwh->ext_fw_offset), le32_to_cpu(fwh->ext_fw_len));
-	at76_dbg(DBG_DEVSTART, "firmware id %s", str);
-
-exit:
-	mutex_unlock(&fw_mutex);
-
-	if (fwe->loaded)
-		return fwe;
-	else
-		return NULL;
-}
-
-/* Allocate network device and initialize private data */
-static struct at76_priv *at76_alloc_new_device(struct usb_device *udev)
-{
-	struct net_device *netdev;
-	struct at76_priv *priv;
-	int i;
-
-	/* allocate memory for our device state and initialize it */
-	netdev = alloc_etherdev(sizeof(struct at76_priv));
-	if (!netdev) {
-		dev_printk(KERN_ERR, &udev->dev, "out of memory\n");
-		return NULL;
-	}
-
-	priv = netdev_priv(netdev);
-
-	priv->udev = udev;
-	priv->netdev = netdev;
-
-	mutex_init(&priv->mtx);
-	INIT_WORK(&priv->work_assoc_done, at76_work_assoc_done);
-	INIT_WORK(&priv->work_join, at76_work_join);
-	INIT_WORK(&priv->work_new_bss, at76_work_new_bss);
-	INIT_WORK(&priv->work_start_scan, at76_work_start_scan);
-	INIT_WORK(&priv->work_set_promisc, at76_work_set_promisc);
-	INIT_WORK(&priv->work_submit_rx, at76_work_submit_rx);
-	INIT_DELAYED_WORK(&priv->dwork_restart, at76_dwork_restart);
-	INIT_DELAYED_WORK(&priv->dwork_get_scan, at76_dwork_get_scan);
-	INIT_DELAYED_WORK(&priv->dwork_beacon, at76_dwork_beacon);
-	INIT_DELAYED_WORK(&priv->dwork_auth, at76_dwork_auth);
-	INIT_DELAYED_WORK(&priv->dwork_assoc, at76_dwork_assoc);
-
-	spin_lock_init(&priv->mgmt_spinlock);
-	priv->next_mgmt_bulk = NULL;
-	priv->mac_state = MAC_INIT;
-
-	/* initialize empty BSS list */
-	priv->curr_bss = NULL;
-	INIT_LIST_HEAD(&priv->bss_list);
-	spin_lock_init(&priv->bss_list_spinlock);
-
-	init_timer(&priv->bss_list_timer);
-	priv->bss_list_timer.data = (unsigned long)priv;
-	priv->bss_list_timer.function = at76_bss_list_timeout;
-
-	spin_lock_init(&priv->spy_spinlock);
-
-	/* mark all rx data entries as unused */
-	for (i = 0; i < NR_RX_DATA_BUF; i++)
-		priv->rx_data[i].skb = NULL;
-
-	priv->rx_tasklet.func = at76_rx_tasklet;
-	priv->rx_tasklet.data = 0;
-
-	priv->pm_mode = AT76_PM_OFF;
-	priv->pm_period = 0;
-
-	return priv;
-}
-
-static int at76_alloc_urbs(struct at76_priv *priv,
-			   struct usb_interface *interface)
-{
-	struct usb_endpoint_descriptor *endpoint, *ep_in, *ep_out;
-	int i;
-	int buffer_size;
-	struct usb_host_interface *iface_desc;
-
-	at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__);
-
-	at76_dbg(DBG_URB, "%s: NumEndpoints %d ", __func__,
-		 interface->altsetting[0].desc.bNumEndpoints);
-
-	ep_in = NULL;
-	ep_out = NULL;
-	iface_desc = interface->cur_altsetting;
-	for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
-		endpoint = &iface_desc->endpoint[i].desc;
-
-		at76_dbg(DBG_URB, "%s: %d. endpoint: addr 0x%x attr 0x%x",
-			 __func__, i, endpoint->bEndpointAddress,
-			 endpoint->bmAttributes);
-
-		if (!ep_in && usb_endpoint_is_bulk_in(endpoint))
-			ep_in = endpoint;
-
-		if (!ep_out && usb_endpoint_is_bulk_out(endpoint))
-			ep_out = endpoint;
-	}
-
-	if (!ep_in || !ep_out) {
-		dev_printk(KERN_ERR, &interface->dev,
-			   "bulk endpoints missing\n");
-		return -ENXIO;
-	}
-
-	priv->rx_pipe = usb_rcvbulkpipe(priv->udev, ep_in->bEndpointAddress);
-	priv->tx_pipe = usb_sndbulkpipe(priv->udev, ep_out->bEndpointAddress);
-
-	priv->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
-	priv->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!priv->rx_urb || !priv->tx_urb) {
-		dev_printk(KERN_ERR, &interface->dev, "cannot allocate URB\n");
-		return -ENOMEM;
-	}
-
-	buffer_size = sizeof(struct at76_tx_buffer) + MAX_PADDING_SIZE;
-	priv->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
-	if (!priv->bulk_out_buffer) {
-		dev_printk(KERN_ERR, &interface->dev,
-			   "cannot allocate output buffer\n");
-		return -ENOMEM;
-	}
-
-	at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__);
-
-	return 0;
-}
-
-static const struct net_device_ops at76_netdev_ops = {
-	.ndo_open		= at76_open,
-	.ndo_stop		= at76_stop,
-	.ndo_get_stats		= at76_get_stats,
-	.ndo_start_xmit		= at76_tx,
-	.ndo_tx_timeout		= at76_tx_timeout,
-	.ndo_set_multicast_list	= at76_set_multicast,
-	.ndo_set_mac_address	= at76_set_mac_address,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_change_mtu		= eth_change_mtu,
-};
-
-/* Register network device and initialize the hardware */
-static int at76_init_new_device(struct at76_priv *priv,
-				struct usb_interface *interface)
-{
-	struct net_device *netdev = priv->netdev;
-	int ret;
-
-	/* set up the endpoint information */
-	/* check out the endpoints */
-
-	at76_dbg(DBG_DEVSTART, "USB interface: %d endpoints",
-		 interface->cur_altsetting->desc.bNumEndpoints);
-
-	ret = at76_alloc_urbs(priv, interface);
-	if (ret < 0)
-		goto exit;
-
-	/* MAC address */
-	ret = at76_get_hw_config(priv);
-	if (ret < 0) {
-		dev_printk(KERN_ERR, &interface->dev,
-			   "cannot get MAC address\n");
-		goto exit;
-	}
-
-	priv->domain = at76_get_reg_domain(priv->regulatory_domain);
-	/* init. netdev->dev_addr */
-	memcpy(netdev->dev_addr, priv->mac_addr, ETH_ALEN);
-
-	priv->channel = DEF_CHANNEL;
-	priv->iw_mode = IW_MODE_INFRA;
-	priv->rts_threshold = DEF_RTS_THRESHOLD;
-	priv->frag_threshold = DEF_FRAG_THRESHOLD;
-	priv->short_retry_limit = DEF_SHORT_RETRY_LIMIT;
-	priv->txrate = TX_RATE_AUTO;
-	priv->preamble_type = PREAMBLE_TYPE_LONG;
-	priv->beacon_period = 100;
-	priv->beacons_last_qual = jiffies;
-	priv->auth_mode = WLAN_AUTH_OPEN;
-	priv->scan_min_time = DEF_SCAN_MIN_TIME;
-	priv->scan_max_time = DEF_SCAN_MAX_TIME;
-	priv->scan_mode = SCAN_TYPE_ACTIVE;
-
-	netdev->flags &= ~IFF_MULTICAST;	/* not yet or never */
-	netdev->netdev_ops = &at76_netdev_ops;
-	netdev->ethtool_ops = &at76_ethtool_ops;
-
-	/* Add pointers to enable iwspy support. */
-	priv->wireless_data.spy_data = &priv->spy_data;
-#ifdef CONFIG_WIRELESS_EXT
-	netdev->wireless_data = &priv->wireless_data;
-	netdev->wireless_handlers = &at76_handler_def;
-#endif
-
-	netdev->watchdog_timeo = 2 * HZ;
-	dev_alloc_name(netdev, "wlan%d");
-
-	ret = register_netdev(priv->netdev);
-	if (ret) {
-		dev_printk(KERN_ERR, &interface->dev,
-			   "cannot register netdevice (status %d)!\n", ret);
-		goto exit;
-	}
-	priv->netdev_registered = 1;
-
-	printk(KERN_INFO "%s: USB %s, MAC %pM, firmware %d.%d.%d-%d\n",
-	       netdev->name, dev_name(&interface->dev), priv->mac_addr,
-	       priv->fw_version.major, priv->fw_version.minor,
-	       priv->fw_version.patch, priv->fw_version.build);
-	printk(KERN_INFO "%s: regulatory domain 0x%02x: %s\n", netdev->name,
-	       priv->regulatory_domain, priv->domain->name);
-
-	/* we let this timer run the whole time this driver instance lives */
-	mod_timer(&priv->bss_list_timer, jiffies + BSS_LIST_TIMEOUT);
-
-exit:
-	return ret;
-}
-
-static void at76_delete_device(struct at76_priv *priv)
-{
-	int i;
-
-	at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__);
-
-	/* The device is gone, don't bother turning it off */
-	priv->device_unplugged = 1;
-
-	if (priv->netdev_registered)
-		unregister_netdev(priv->netdev);
-
-	/* assuming we used keventd, it must quiesce too */
-	flush_scheduled_work();
-
-	kfree(priv->bulk_out_buffer);
-
-	if (priv->tx_urb) {
-		usb_kill_urb(priv->tx_urb);
-		usb_free_urb(priv->tx_urb);
-	}
-	if (priv->rx_urb) {
-		usb_kill_urb(priv->rx_urb);
-		usb_free_urb(priv->rx_urb);
-	}
-
-	at76_dbg(DBG_PROC_ENTRY, "%s: unlinked urbs", __func__);
-
-	kfree_skb(priv->rx_skb);
-
-	at76_free_bss_list(priv);
-	del_timer_sync(&priv->bss_list_timer);
-	cancel_delayed_work(&priv->dwork_get_scan);
-	cancel_delayed_work(&priv->dwork_beacon);
-	cancel_delayed_work(&priv->dwork_auth);
-	cancel_delayed_work(&priv->dwork_assoc);
-
-	if (priv->mac_state == MAC_CONNECTED)
-		at76_iwevent_bss_disconnect(priv->netdev);
-
-	for (i = 0; i < NR_RX_DATA_BUF; i++)
-		if (priv->rx_data[i].skb) {
-			dev_kfree_skb(priv->rx_data[i].skb);
-			priv->rx_data[i].skb = NULL;
-		}
-	usb_put_dev(priv->udev);
-
-	at76_dbg(DBG_PROC_ENTRY, "%s: before freeing priv/netdev", __func__);
-	free_netdev(priv->netdev);	/* priv is in netdev */
-
-	at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__);
-}
-
-static int at76_probe(struct usb_interface *interface,
-		      const struct usb_device_id *id)
-{
-	int ret;
-	struct at76_priv *priv;
-	struct fwentry *fwe;
-	struct usb_device *udev;
-	int op_mode;
-	int need_ext_fw = 0;
-	struct mib_fw_version fwv;
-	int board_type = (int)id->driver_info;
-
-	udev = usb_get_dev(interface_to_usbdev(interface));
-
-	/* Load firmware into kernel memory */
-	fwe = at76_load_firmware(udev, board_type);
-	if (!fwe) {
-		ret = -ENOENT;
-		goto error;
-	}
-
-	op_mode = at76_get_op_mode(udev);
-
-	at76_dbg(DBG_DEVSTART, "opmode %d", op_mode);
-
-	/* we get OPMODE_NONE with 2.4.23, SMC2662W-AR ???
-	   we get 204 with 2.4.23, Fiberline FL-WL240u (505A+RFMD2958) ??? */
-
-	if (op_mode == OPMODE_HW_CONFIG_MODE) {
-		dev_printk(KERN_ERR, &interface->dev,
-			   "cannot handle a device in HW_CONFIG_MODE\n");
-		ret = -EBUSY;
-		goto error;
-	}
-
-	if (op_mode != OPMODE_NORMAL_NIC_WITH_FLASH
-	    && op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
-		/* download internal firmware part */
-		dev_printk(KERN_DEBUG, &interface->dev,
-			   "downloading internal firmware\n");
-		ret = at76_load_internal_fw(udev, fwe);
-		if (ret < 0) {
-			dev_printk(KERN_ERR, &interface->dev,
-				   "error %d downloading internal firmware\n",
-				   ret);
-			goto error;
-		}
-		usb_put_dev(udev);
-		return ret;
-	}
-
-	/* Internal firmware already inside the device.  Get firmware
-	 * version to test if external firmware is loaded.
-	 * This works only for newer firmware, e.g. the Intersil 0.90.x
-	 * says "control timeout on ep0in" and subsequent
-	 * at76_get_op_mode() fail too :-( */
-
-	/* if version >= 0.100.x.y or device with built-in flash we can
-	 * query the device for the fw version */
-	if ((fwe->fw_version.major > 0 || fwe->fw_version.minor >= 100)
-	    || (op_mode == OPMODE_NORMAL_NIC_WITH_FLASH)) {
-		ret = at76_get_mib(udev, MIB_FW_VERSION, &fwv, sizeof(fwv));
-		if (ret < 0 || (fwv.major | fwv.minor) == 0)
-			need_ext_fw = 1;
-	} else
-		/* No way to check firmware version, reload to be sure */
-		need_ext_fw = 1;
-
-	if (need_ext_fw) {
-		dev_printk(KERN_DEBUG, &interface->dev,
-			   "downloading external firmware\n");
-
-		ret = at76_load_external_fw(udev, fwe);
-		if (ret)
-			goto error;
-
-		/* Re-check firmware version */
-		ret = at76_get_mib(udev, MIB_FW_VERSION, &fwv, sizeof(fwv));
-		if (ret < 0) {
-			dev_printk(KERN_ERR, &interface->dev,
-				   "error %d getting firmware version\n", ret);
-			goto error;
-		}
-	}
-
-	priv = at76_alloc_new_device(udev);
-	if (!priv) {
-		ret = -ENOMEM;
-		goto error;
-	}
-
-	SET_NETDEV_DEV(priv->netdev, &interface->dev);
-	usb_set_intfdata(interface, priv);
-
-	memcpy(&priv->fw_version, &fwv, sizeof(struct mib_fw_version));
-	priv->board_type = board_type;
-
-	ret = at76_init_new_device(priv, interface);
-	if (ret < 0)
-		at76_delete_device(priv);
-
-	return ret;
-
-error:
-	usb_put_dev(udev);
-	return ret;
-}
-
-static void at76_disconnect(struct usb_interface *interface)
-{
-	struct at76_priv *priv;
-
-	priv = usb_get_intfdata(interface);
-	usb_set_intfdata(interface, NULL);
-
-	/* Disconnect after loading internal firmware */
-	if (!priv)
-		return;
-
-	printk(KERN_INFO "%s: disconnecting\n", priv->netdev->name);
-	at76_delete_device(priv);
-	dev_printk(KERN_INFO, &interface->dev, "disconnected\n");
-}
-
-/* Structure for registering this driver with the USB subsystem */
-static struct usb_driver at76_driver = {
-	.name = DRIVER_NAME,
-	.probe = at76_probe,
-	.disconnect = at76_disconnect,
-	.id_table = dev_table,
-};
-
-static int __init at76_mod_init(void)
-{
-	int result;
-
-	printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " loading\n");
-
-	mutex_init(&fw_mutex);
-
-	/* register this driver with the USB subsystem */
-	result = usb_register(&at76_driver);
-	if (result < 0)
-		printk(KERN_ERR DRIVER_NAME
-		       ": usb_register failed (status %d)\n", result);
-
-	led_trigger_register_simple("at76_usb-tx", &ledtrig_tx);
-	return result;
-}
-
-static void __exit at76_mod_exit(void)
-{
-	int i;
-
-	printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " unloading\n");
-	usb_deregister(&at76_driver);
-	for (i = 0; i < ARRAY_SIZE(firmwares); i++) {
-		if (firmwares[i].fw)
-			release_firmware(firmwares[i].fw);
-	}
-	led_trigger_unregister_simple(ledtrig_tx);
-}
-
-module_param_named(debug, at76_debug, int, 0600);
-MODULE_PARM_DESC(debug, "Debugging level");
-
-module_init(at76_mod_init);
-module_exit(at76_mod_exit);
-
-MODULE_AUTHOR("Oliver Kurth <oku@xxxxxxxxxxx>");
-MODULE_AUTHOR("Joerg Albert <joerg.albert@xxxxxx>");
-MODULE_AUTHOR("Alex <alex@xxxxxxxxxx>");
-MODULE_AUTHOR("Nick Jones");
-MODULE_AUTHOR("Balint Seeber <n0_5p4m_p13453@xxxxxxxxxxx>");
-MODULE_AUTHOR("Pavel Roskin <proski@xxxxxxx>");
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
--- a/drivers/staging/at76_usb/at76_usb.h
+++ /dev/null
@@ -1,706 +0,0 @@
-/*
- * Copyright (c) 2002,2003 Oliver Kurth
- *	     (c) 2003,2004 Joerg Albert <joerg.albert@xxxxxx>
- *	     (c) 2007 Guido Guenther <agx@xxxxxxxxxxx>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This driver was based on information from the Sourceforge driver
- * released and maintained by Atmel:
- *
- *  http://sourceforge.net/projects/atmelwlandriver/
- *
- * Although the code was completely re-written,
- * it would have been impossible without Atmel's decision to
- * release an Open Source driver (unfortunately the firmware was
- * kept binary only). Thanks for that decision to Atmel!
- */
-
-#ifndef _AT76_USB_H
-#define _AT76_USB_H
-
-/*
- * ieee80211 definitions copied from net/ieee80211.h
- */
-
-#define WEP_KEY_LEN		13
-#define WEP_KEYS		4
-
-#define IEEE80211_DATA_LEN		2304
-/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
-   6.2.1.1.2.
-
-   The figure in section 7.1.2 suggests a body size of up to 2312
-   bytes is allowed, which is a bit confusing, I suspect this
-   represents the 2304 bytes of real data, plus a possible 8 bytes of
-   WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
-
-#define IEEE80211_1ADDR_LEN 10
-#define IEEE80211_2ADDR_LEN 16
-#define IEEE80211_3ADDR_LEN 24
-#define IEEE80211_4ADDR_LEN 30
-#define IEEE80211_FCS_LEN    4
-#define IEEE80211_HLEN			(IEEE80211_4ADDR_LEN)
-#define IEEE80211_FRAME_LEN		(IEEE80211_DATA_LEN + IEEE80211_HLEN)
-
-#define MIN_FRAG_THRESHOLD     256U
-#define	MAX_FRAG_THRESHOLD     2346U
-
-struct ieee80211_info_element {
-	u8 id;
-	u8 len;
-	u8 data[0];
-} __attribute__ ((packed));
-
-struct ieee80211_hdr_3addr {
-	__le16 frame_ctl;
-	__le16 duration_id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-	u8 addr3[ETH_ALEN];
-	__le16 seq_ctl;
-	u8 payload[0];
-} __attribute__ ((packed));
-
-struct ieee80211_auth {
-	struct ieee80211_hdr_3addr header;
-	__le16 algorithm;
-	__le16 transaction;
-	__le16 status;
-	/* challenge */
-	struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_assoc_request {
-	struct ieee80211_hdr_3addr header;
-	__le16 capability;
-	__le16 listen_interval;
-	/* SSID, supported rates, RSN */
-	struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_probe_response {
-	struct ieee80211_hdr_3addr header;
-	__le32 time_stamp[2];
-	__le16 beacon_interval;
-	__le16 capability;
-	/* SSID, supported rates, FH params, DS params,
-	 * CF params, IBSS params, TIM (if beacon), RSN */
-	struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-/* Alias beacon for probe_response */
-#define ieee80211_beacon ieee80211_probe_response
-
-struct ieee80211_assoc_response {
-	struct ieee80211_hdr_3addr header;
-	__le16 capability;
-	__le16 status;
-	__le16 aid;
-	/* supported rates */
-	struct ieee80211_info_element info_element[0];
-} __attribute__ ((packed));
-
-struct ieee80211_disassoc {
-	struct ieee80211_hdr_3addr header;
-	__le16 reason;
-} __attribute__ ((packed));
-
-/* Board types */
-enum board_type {
-	BOARD_503_ISL3861 = 1,
-	BOARD_503_ISL3863 = 2,
-	BOARD_503 = 3,
-	BOARD_503_ACC = 4,
-	BOARD_505 = 5,
-	BOARD_505_2958 = 6,
-	BOARD_505A = 7,
-	BOARD_505AMX = 8
-};
-
-/* our private ioctl's */
-/* preamble length (0 - long, 1 - short, 2 - auto) */
-#define AT76_SET_SHORT_PREAMBLE		(SIOCIWFIRSTPRIV + 0)
-#define AT76_GET_SHORT_PREAMBLE		(SIOCIWFIRSTPRIV + 1)
-/* which debug channels are enabled */
-#define AT76_SET_DEBUG			(SIOCIWFIRSTPRIV + 2)
-#define AT76_GET_DEBUG			(SIOCIWFIRSTPRIV + 3)
-/* power save mode (incl. the Atmel proprietary smart save mode) */
-#define AT76_SET_POWERSAVE_MODE		(SIOCIWFIRSTPRIV + 4)
-#define AT76_GET_POWERSAVE_MODE		(SIOCIWFIRSTPRIV + 5)
-/* min and max channel times for scan */
-#define AT76_SET_SCAN_TIMES		(SIOCIWFIRSTPRIV + 6)
-#define AT76_GET_SCAN_TIMES		(SIOCIWFIRSTPRIV + 7)
-/* scan mode (0 - active, 1 - passive) */
-#define AT76_SET_SCAN_MODE		(SIOCIWFIRSTPRIV + 8)
-#define AT76_GET_SCAN_MODE		(SIOCIWFIRSTPRIV + 9)
-
-#define CMD_STATUS_IDLE				0x00
-#define CMD_STATUS_COMPLETE			0x01
-#define CMD_STATUS_UNKNOWN			0x02
-#define CMD_STATUS_INVALID_PARAMETER		0x03
-#define CMD_STATUS_FUNCTION_NOT_SUPPORTED	0x04
-#define CMD_STATUS_TIME_OUT			0x07
-#define CMD_STATUS_IN_PROGRESS			0x08
-#define CMD_STATUS_HOST_FAILURE			0xff
-#define CMD_STATUS_SCAN_FAILED			0xf0
-
-/* answers to get op mode */
-#define OPMODE_NONE				0x00
-#define OPMODE_NORMAL_NIC_WITH_FLASH		0x01
-#define OPMODE_HW_CONFIG_MODE			0x02
-#define OPMODE_DFU_MODE_WITH_FLASH		0x03
-#define OPMODE_NORMAL_NIC_WITHOUT_FLASH		0x04
-
-#define CMD_SET_MIB		0x01
-#define CMD_GET_MIB		0x02
-#define CMD_SCAN		0x03
-#define CMD_JOIN		0x04
-#define CMD_START_IBSS		0x05
-#define CMD_RADIO_ON		0x06
-#define CMD_RADIO_OFF		0x07
-#define CMD_STARTUP		0x0B
-
-#define MIB_LOCAL		0x01
-#define MIB_MAC_ADDR		0x02
-#define MIB_MAC			0x03
-#define MIB_MAC_MGMT		0x05
-#define MIB_MAC_WEP		0x06
-#define MIB_PHY			0x07
-#define MIB_FW_VERSION		0x08
-#define MIB_MDOMAIN		0x09
-
-#define ADHOC_MODE		1
-#define INFRASTRUCTURE_MODE	2
-
-/* values for struct mib_local, field preamble_type */
-#define PREAMBLE_TYPE_LONG	0
-#define PREAMBLE_TYPE_SHORT	1
-#define PREAMBLE_TYPE_AUTO	2
-
-/* values for tx_rate */
-#define TX_RATE_1MBIT		0
-#define TX_RATE_2MBIT		1
-#define TX_RATE_5_5MBIT 	2
-#define TX_RATE_11MBIT		3
-#define TX_RATE_AUTO		4
-
-/* power management modes */
-#define AT76_PM_OFF		1
-#define AT76_PM_ON		2
-#define AT76_PM_SMART		3
-
-struct hwcfg_r505 {
-	u8 cr39_values[14];
-	u8 reserved1[14];
-	u8 bb_cr[14];
-	u8 pidvid[4];
-	u8 mac_addr[ETH_ALEN];
-	u8 regulatory_domain;
-	u8 reserved2[14];
-	u8 cr15_values[14];
-	u8 reserved3[3];
-} __attribute__((packed));
-
-struct hwcfg_rfmd {
-	u8 cr20_values[14];
-	u8 cr21_values[14];
-	u8 bb_cr[14];
-	u8 pidvid[4];
-	u8 mac_addr[ETH_ALEN];
-	u8 regulatory_domain;
-	u8 low_power_values[14];
-	u8 normal_power_values[14];
-	u8 reserved1[3];
-} __attribute__((packed));
-
-struct hwcfg_intersil {
-	u8 mac_addr[ETH_ALEN];
-	u8 cr31_values[14];
-	u8 cr58_values[14];
-	u8 pidvid[4];
-	u8 regulatory_domain;
-	u8 reserved[1];
-} __attribute__((packed));
-
-union at76_hwcfg {
-	struct hwcfg_intersil i;
-	struct hwcfg_rfmd r3;
-	struct hwcfg_r505 r5;
-};
-
-#define WEP_SMALL_KEY_LEN	(40 / 8)
-#define WEP_LARGE_KEY_LEN	(104 / 8)
-
-struct at76_card_config {
-	u8 exclude_unencrypted;
-	u8 promiscuous_mode;
-	u8 short_retry_limit;
-	u8 encryption_type;
-	__le16 rts_threshold;
-	__le16 fragmentation_threshold;	/* 256..2346 */
-	u8 basic_rate_set[4];
-	u8 auto_rate_fallback;	/* 0,1 */
-	u8 channel;
-	u8 privacy_invoked;
-	u8 wep_default_key_id;	/* 0..3 */
-	u8 current_ssid[32];
-	u8 wep_default_key_value[4][WEP_KEY_LEN];
-	u8 ssid_len;
-	u8 short_preamble;
-	__le16 beacon_period;
-} __attribute__((packed));
-
-struct at76_command {
-	u8 cmd;
-	u8 reserved;
-	__le16 size;
-	u8 data[0];
-} __attribute__((packed));
-
-/* Length of Atmel-specific Rx header before 802.11 frame */
-#define AT76_RX_HDRLEN offsetof(struct at76_rx_buffer, packet)
-
-struct at76_rx_buffer {
-	__le16 wlength;
-	u8 rx_rate;
-	u8 newbss;
-	u8 fragmentation;
-	u8 rssi;
-	u8 link_quality;
-	u8 noise_level;
-	__le32 rx_time;
-	u8 packet[IEEE80211_FRAME_LEN + IEEE80211_FCS_LEN];
-} __attribute__((packed));
-
-/* Length of Atmel-specific Tx header before 802.11 frame */
-#define AT76_TX_HDRLEN offsetof(struct at76_tx_buffer, packet)
-
-struct at76_tx_buffer {
-	__le16 wlength;
-	u8 tx_rate;
-	u8 padding;
-	u8 reserved[4];
-	u8 packet[IEEE80211_FRAME_LEN + IEEE80211_FCS_LEN];
-} __attribute__((packed));
-
-/* defines for scan_type below */
-#define SCAN_TYPE_ACTIVE	0
-#define SCAN_TYPE_PASSIVE	1
-
-struct at76_req_scan {
-	u8 bssid[ETH_ALEN];
-	u8 essid[32];
-	u8 scan_type;
-	u8 channel;
-	__le16 probe_delay;
-	__le16 min_channel_time;
-	__le16 max_channel_time;
-	u8 essid_size;
-	u8 international_scan;
-} __attribute__((packed));
-
-struct at76_req_ibss {
-	u8 bssid[ETH_ALEN];
-	u8 essid[32];
-	u8 bss_type;
-	u8 channel;
-	u8 essid_size;
-	u8 reserved[3];
-} __attribute__((packed));
-
-struct at76_req_join {
-	u8 bssid[ETH_ALEN];
-	u8 essid[32];
-	u8 bss_type;
-	u8 channel;
-	__le16 timeout;
-	u8 essid_size;
-	u8 reserved;
-} __attribute__((packed));
-
-struct set_mib_buffer {
-	u8 type;
-	u8 size;
-	u8 index;
-	u8 reserved;
-	union {
-		u8 byte;
-		__le16 word;
-		u8 addr[ETH_ALEN];
-	} data;
-} __attribute__((packed));
-
-struct mib_local {
-	u16 reserved0;
-	u8 beacon_enable;
-	u8 txautorate_fallback;
-	u8 reserved1;
-	u8 ssid_size;
-	u8 promiscuous_mode;
-	u16 reserved2;
-	u8 preamble_type;
-	u16 reserved3;
-} __attribute__((packed));
-
-struct mib_mac_addr {
-	u8 mac_addr[ETH_ALEN];
-	u8 res[2];		/* ??? */
-	u8 group_addr[4][ETH_ALEN];
-	u8 group_addr_status[4];
-} __attribute__((packed));
-
-struct mib_mac {
-	__le32 max_tx_msdu_lifetime;
-	__le32 max_rx_lifetime;
-	__le16 frag_threshold;
-	__le16 rts_threshold;
-	__le16 cwmin;
-	__le16 cwmax;
-	u8 short_retry_time;
-	u8 long_retry_time;
-	u8 scan_type;		/* active or passive */
-	u8 scan_channel;
-	__le16 probe_delay;	/* delay before ProbeReq in active scan, RO */
-	__le16 min_channel_time;
-	__le16 max_channel_time;
-	__le16 listen_interval;
-	u8 desired_ssid[32];
-	u8 desired_bssid[ETH_ALEN];
-	u8 desired_bsstype;	/* ad-hoc or infrastructure */
-	u8 reserved2;
-} __attribute__((packed));
-
-struct mib_mac_mgmt {
-	__le16 beacon_period;
-	__le16 CFP_max_duration;
-	__le16 medium_occupancy_limit;
-	__le16 station_id;	/* assoc id */
-	__le16 ATIM_window;
-	u8 CFP_mode;
-	u8 privacy_option_implemented;
-	u8 DTIM_period;
-	u8 CFP_period;
-	u8 current_bssid[ETH_ALEN];
-	u8 current_essid[32];
-	u8 current_bss_type;
-	u8 power_mgmt_mode;
-	/* rfmd and 505 */
-	u8 ibss_change;
-	u8 res;
-	u8 multi_domain_capability_implemented;
-	u8 multi_domain_capability_enabled;
-	u8 country_string[3];
-	u8 reserved[3];
-} __attribute__((packed));
-
-struct mib_mac_wep {
-	u8 privacy_invoked;	/* 0 disable encr., 1 enable encr */
-	u8 wep_default_key_id;
-	u8 wep_key_mapping_len;
-	u8 exclude_unencrypted;
-	__le32 wep_icv_error_count;
-	__le32 wep_excluded_count;
-	u8 wep_default_keyvalue[WEP_KEYS][WEP_KEY_LEN];
-	u8 encryption_level;	/* 1 for 40bit, 2 for 104bit encryption */
-} __attribute__((packed));
-
-struct mib_phy {
-	__le32 ed_threshold;
-
-	__le16 slot_time;
-	__le16 sifs_time;
-	__le16 preamble_length;
-	__le16 plcp_header_length;
-	__le16 mpdu_max_length;
-	__le16 cca_mode_supported;
-
-	u8 operation_rate_set[4];
-	u8 channel_id;
-	u8 current_cca_mode;
-	u8 phy_type;
-	u8 current_reg_domain;
-} __attribute__((packed));
-
-struct mib_fw_version {
-	u8 major;
-	u8 minor;
-	u8 patch;
-	u8 build;
-} __attribute__((packed));
-
-struct mib_mdomain {
-	u8 tx_powerlevel[14];
-	u8 channel_list[14];	/* 0 for invalid channels */
-} __attribute__((packed));
-
-struct at76_fw_header {
-	__le32 crc;		/* CRC32 of the whole image */
-	__le32 board_type;	/* firmware compatibility code */
-	u8 build;		/* firmware build number */
-	u8 patch;		/* firmware patch level */
-	u8 minor;		/* firmware minor version */
-	u8 major;		/* firmware major version */
-	__le32 str_offset;	/* offset of the copyright string */
-	__le32 int_fw_offset;	/* internal firmware image offset */
-	__le32 int_fw_len;	/* internal firmware image length */
-	__le32 ext_fw_offset;	/* external firmware image offset */
-	__le32 ext_fw_len;	/* external firmware image length */
-} __attribute__((packed));
-
-enum mac_state {
-	MAC_INIT,
-	MAC_SCANNING,
-	MAC_AUTH,
-	MAC_ASSOC,
-	MAC_JOINING,
-	MAC_CONNECTED,
-	MAC_OWN_IBSS
-};
-
-/* a description of a regulatory domain and the allowed channels */
-struct reg_domain {
-	u16 code;
-	char const *name;
-	u32 channel_map;	/* if bit N is set, channel (N+1) is allowed */
-};
-
-/* how long do we keep a (I)BSS in the bss_list in jiffies
-   this should be long enough for the user to retrieve the table
-   (by iwlist ?) after the device started, because all entries from
-   other channels than the one the device locks on get removed, too */
-#define BSS_LIST_TIMEOUT	(120 * HZ)
-/* struct to store BSS info found during scan */
-#define BSS_LIST_MAX_RATE_LEN	32	/* 32 rates should be enough ... */
-
-struct bss_info {
-	struct list_head list;
-
-	u8 bssid[ETH_ALEN];	/* bssid */
-	u8 ssid[IW_ESSID_MAX_SIZE];	/* essid */
-	u8 ssid_len;		/* length of ssid above */
-	u8 channel;
-	u16 capa;		/* BSS capabilities */
-	u16 beacon_interval;	/* beacon interval, Kus (1024 microseconds) */
-	u8 rates[BSS_LIST_MAX_RATE_LEN];	/* supported rates in units of
-						   500 kbps, ORed with 0x80 for
-						   basic rates */
-	u8 rates_len;
-
-	/* quality of received beacon */
-	u8 rssi;
-	u8 link_qual;
-	u8 noise_level;
-
-	unsigned long last_rx;	/* time (jiffies) of last beacon received */
-};
-
-/* a rx data buffer to collect rx fragments */
-struct rx_data_buf {
-	u8 sender[ETH_ALEN];	/* sender address */
-	u16 seqnr;		/* sequence number */
-	u16 fragnr;		/* last fragment received */
-	unsigned long last_rx;	/* jiffies of last rx */
-	struct sk_buff *skb;	/* == NULL if entry is free */
-};
-
-#define NR_RX_DATA_BUF		8
-
-/* Data for one loaded firmware file */
-struct fwentry {
-	const char *const fwname;
-	const struct firmware *fw;
-	int extfw_size;
-	int intfw_size;
-	/* pointer to loaded firmware, no need to free */
-	u8 *extfw;		/* external firmware, extfw_size bytes long */
-	u8 *intfw;		/* internal firmware, intfw_size bytes long */
-	enum board_type board_type;	/* board type */
-	struct mib_fw_version fw_version;
-	int loaded;		/* Loaded and parsed successfully */
-};
-
-struct at76_priv {
-	struct usb_device *udev;	/* USB device pointer */
-	struct net_device *netdev;	/* net device pointer */
-	struct net_device_stats stats;	/* net device stats */
-	struct iw_statistics wstats;	/* wireless stats */
-
-	struct sk_buff *rx_skb;	/* skbuff for receiving data */
-	void *bulk_out_buffer;	/* buffer for sending data */
-
-	struct urb *tx_urb;	/* URB for sending data */
-	struct urb *rx_urb;	/* URB for receiving data */
-
-	unsigned int tx_pipe;	/* bulk out pipe */
-	unsigned int rx_pipe;	/* bulk in pipe */
-
-	struct mutex mtx;	/* locks this structure */
-
-	/* work queues */
-	struct work_struct work_assoc_done;
-	struct work_struct work_join;
-	struct work_struct work_new_bss;
-	struct work_struct work_start_scan;
-	struct work_struct work_set_promisc;
-	struct work_struct work_submit_rx;
-	struct delayed_work dwork_restart;
-	struct delayed_work dwork_get_scan;
-	struct delayed_work dwork_beacon;
-	struct delayed_work dwork_auth;
-	struct delayed_work dwork_assoc;
-
-	struct tasklet_struct rx_tasklet;
-
-	/* the WEP stuff */
-	int wep_enabled;	/* 1 if WEP is enabled */
-	int wep_key_id;		/* key id to be used */
-	u8 wep_keys[WEP_KEYS][WEP_KEY_LEN];	/* the four WEP keys,
-						   5 or 13 bytes are used */
-	u8 wep_keys_len[WEP_KEYS];	/* the length of the above keys */
-
-	int channel;
-	int iw_mode;
-	u8 bssid[ETH_ALEN];
-	u8 essid[IW_ESSID_MAX_SIZE];
-	int essid_size;
-	int radio_on;
-	int promisc;
-
-	int preamble_type;	/* 0 - long, 1 - short, 2 - auto */
-	int auth_mode;		/* authentication type: 0 open, 1 shared key */
-	int txrate;		/* 0,1,2,3 = 1,2,5.5,11 Mbps, 4 is auto */
-	int frag_threshold;	/* threshold for fragmentation of tx packets */
-	int rts_threshold;	/* threshold for RTS mechanism */
-	int short_retry_limit;
-
-	int scan_min_time;	/* scan min channel time */
-	int scan_max_time;	/* scan max channel time */
-	int scan_mode;		/* SCAN_TYPE_ACTIVE, SCAN_TYPE_PASSIVE */
-	int scan_need_any;	/* if set, need to scan for any ESSID */
-
-	/* the list we got from scanning */
-	spinlock_t bss_list_spinlock;	/* protects bss_list operations */
-	struct list_head bss_list;	/* list of BSS we got beacons from */
-	struct timer_list bss_list_timer;	/* timer to purge old entries
-						   from bss_list */
-	struct bss_info *curr_bss;	/* current BSS */
-	u16 assoc_id;		/* current association ID, if associated */
-
-	u8 wanted_bssid[ETH_ALEN];
-	int wanted_bssid_valid;	/* != 0 if wanted_bssid is to be used */
-
-	/* some data for infrastructure mode only */
-	spinlock_t mgmt_spinlock;	/* this spinlock protects access to
-					   next_mgmt_bulk */
-
-	struct at76_tx_buffer *next_mgmt_bulk;	/* pending management msg to
-						   send via bulk out */
-	enum mac_state mac_state;
-	enum {
-		SCAN_IDLE,
-		SCAN_IN_PROGRESS,
-		SCAN_COMPLETED
-	} scan_state;
-	time_t last_scan;
-
-	int retries;		/* remaining retries in case of timeout when
-				 * sending AuthReq or AssocReq */
-	u8 pm_mode;		/* power management mode */
-	u32 pm_period;		/* power management period in microseconds */
-
-	struct reg_domain const *domain;	/* reg domain description */
-
-	/* iwspy support */
-	spinlock_t spy_spinlock;
-	struct iw_spy_data spy_data;
-
-	struct iw_public_data wireless_data;
-
-	/* These fields contain HW config provided by the device (not all of
-	 * these fields are used by all board types) */
-	u8 mac_addr[ETH_ALEN];
-	u8 regulatory_domain;
-
-	struct at76_card_config card_config;
-
-	/* store rx fragments until complete */
-	struct rx_data_buf rx_data[NR_RX_DATA_BUF];
-
-	enum board_type board_type;
-	struct mib_fw_version fw_version;
-
-	unsigned int device_unplugged:1;
-	unsigned int netdev_registered:1;
-	struct set_mib_buffer mib_buf;	/* global buffer for set_mib calls */
-
-	/* beacon counting */
-	int beacon_period;	/* period of mgmt beacons, Kus */
-	int beacons_received;
-	unsigned long beacons_last_qual;	/* time we restarted counting
-						   beacons */
-};
-
-struct at76_rx_radiotap {
-	struct ieee80211_radiotap_header rt_hdr;
-	__le64 rt_tsft;
-	u8 rt_flags;
-	u8 rt_rate;
-	s8 rt_signal;
-	s8 rt_noise;
-};
-
-#define AT76_RX_RADIOTAP_PRESENT		  \
-	((1 << IEEE80211_RADIOTAP_TSFT)		| \
-	(1 << IEEE80211_RADIOTAP_FLAGS)		| \
-	(1 << IEEE80211_RADIOTAP_RATE)		| \
-	(1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL)	| \
-	(1 << IEEE80211_RADIOTAP_DB_ANTNOISE))
-
-#define BEACON_MAX_DATA_LENGTH	1500
-
-/* the maximum size of an AssocReq packet */
-#define ASSOCREQ_MAX_SIZE \
-  (AT76_TX_HDRLEN + sizeof(struct ieee80211_assoc_request) + \
-   1 + 1 + IW_ESSID_MAX_SIZE + 1 + 1 + 4)
-
-/* for shared secret auth, add the challenge text size */
-#define AUTH_FRAME_SIZE (AT76_TX_HDRLEN + sizeof(struct ieee80211_auth))
-
-/* Maximal number of AuthReq retries */
-#define AUTH_RETRIES		3
-
-/* Maximal number of AssocReq retries */
-#define ASSOC_RETRIES		3
-
-/* Beacon timeout in managed mode when we are connected */
-#define BEACON_TIMEOUT		(10 * HZ)
-
-/* Timeout for authentication response */
-#define AUTH_TIMEOUT		(1 * HZ)
-
-/* Timeout for association response */
-#define ASSOC_TIMEOUT		(1 * HZ)
-
-/* Polling interval when scan is running */
-#define SCAN_POLL_INTERVAL	(HZ / 4)
-
-/* Command completion timeout */
-#define CMD_COMPLETION_TIMEOUT	(5 * HZ)
-
-#define DEF_RTS_THRESHOLD	1536
-#define DEF_FRAG_THRESHOLD	1536
-#define DEF_SHORT_RETRY_LIMIT	8
-#define DEF_CHANNEL		10
-#define DEF_SCAN_MIN_TIME	10
-#define DEF_SCAN_MAX_TIME	120
-
-#define MAX_RTS_THRESHOLD	(MAX_FRAG_THRESHOLD + 1)
-
-/* the max padding size for tx in bytes (see calc_padding) */
-#define MAX_PADDING_SIZE	53
-
-#endif				/* _AT76_USB_H */
--- a/drivers/staging/at76_usb/Kconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-config USB_ATMEL
-	tristate "Atmel at76c503/at76c505/at76c505a USB cards"
-	depends on WLAN_80211 && USB
-	default N
-	select FW_LOADER
-	---help---
-	  Enable support for USB Wireless devices using Atmel at76c503,
-	  at76c505 or at76c505a chips.
--- a/drivers/staging/at76_usb/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_USB_ATMEL)		+= at76_usb.o
--- a/drivers/staging/at76_usb/TODO
+++ /dev/null
@@ -1,7 +0,0 @@
-Fix the mac80211 port of at76_usb (the proper in-kernel wireless
-stack) and get it included to the mainline. Patches available here:
-
-http://git.kernel.org/?p=linux/kernel/git/linville/wireless-legacy.git;a=shortlog;h=at76
-
-Contact Kalle Valo <kalle.valo@xxxxxx> and linux-wireless list
-<linux-wireless@xxxxxxxxxxxxxxx> for more information.
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -57,8 +57,6 @@ source "drivers/staging/wlan-ng/Kconfig"
 
 source "drivers/staging/echo/Kconfig"
 
-source "drivers/staging/at76_usb/Kconfig"
-
 source "drivers/staging/poch/Kconfig"
 
 source "drivers/staging/agnx/Kconfig"
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -11,7 +11,6 @@ obj-$(CONFIG_USB_IP_COMMON)	+= usbip/
 obj-$(CONFIG_W35UND)		+= winbond/
 obj-$(CONFIG_PRISM2_USB)	+= wlan-ng/
 obj-$(CONFIG_ECHO)		+= echo/
-obj-$(CONFIG_USB_ATMEL)		+= at76_usb/
 obj-$(CONFIG_POCH)		+= poch/
 obj-$(CONFIG_AGNX)		+= agnx/
 obj-$(CONFIG_OTUS)		+= otus/

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux