This patch ports some code from the vendor driver, which is
supposed to upload the right calibration values for the
chosen frequency.
In theory, this should give a better range and throughput
for all users with the open, or one-stage firmware.
Signed-off-by: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx>
---
diff --git a/drivers/net/wireless/ath/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c
index df86f70..be96f50 100644
--- a/drivers/net/wireless/ath/ar9170/phy.c
+++ b/drivers/net/wireless/ath/ar9170/phy.c
@@ -987,6 +987,124 @@ static u8 ar9170_interpolate_u8(u8 x, u8 x1, u8 y1, u8 x2, u8 y2)
#undef SHIFT
}
+static u8 ar9170_interpolate_val(u8 x, u8 *x_array, u8 *y_array)
+{
+ int i;
+
+ for (i = 0; i < 3; i++)
+ if (x <= x_array[i + 1])
+ break;
+
+ return ar9170_interpolate_u8(x,
+ x_array[i],
+ y_array[i],
+ x_array[i + 1],
+ y_array[i + 1]);
+}
+
+static int ar9170_set_freq_cal_data(struct ar9170 *ar,
+ struct ieee80211_channel *channel)
+{
+ u8 *cal_freq_pier;
+ u8 vpds[2][AR5416_PD_GAIN_ICEPTS];
+ u8 pwrs[2][AR5416_PD_GAIN_ICEPTS];
+ int chain, idx, i;
+ u8 f;
+
+ switch (channel->band) {
+ case IEEE80211_BAND_2GHZ:
+ f = channel->center_freq - 2300;
+ cal_freq_pier = ar->eeprom.cal_freq_pier_2G;
+ i = AR5416_NUM_2G_CAL_PIERS - 1;
+ break;
+
+ case IEEE80211_BAND_5GHZ:
+ f = (channel->center_freq - 4800) / 5;
+ cal_freq_pier = ar->eeprom.cal_freq_pier_5G;
+ i = AR5416_NUM_5G_CAL_PIERS - 1;
+ break;
+
+ default:
+ return -EINVAL;
+ break;
+ }
+
+ for (; i >= 0; i--) {
+ if (cal_freq_pier[i] != 0xff)
+ break;
+ }
+ if (i < 0)
+ return -EINVAL;
+
+ idx = ar9170_find_freq_idx(i, cal_freq_pier, f);
+
+ ar9170_regwrite_begin(ar);
+
+ for (chain = 0; chain < AR5416_MAX_CHAINS; chain++) {
+ for (i = 0; i < AR5416_PD_GAIN_ICEPTS; i++) {
+ struct ar9170_calibration_data_per_freq *cal_pier_data;
+ int j;
+
+ switch (channel->band) {
+ case IEEE80211_BAND_2GHZ:
+ cal_pier_data = &ar->eeprom.
+ cal_pier_data_2G[chain][idx];
+ break;
+
+ case IEEE80211_BAND_5GHZ:
+ cal_pier_data = &ar->eeprom.
+ cal_pier_data_5G[chain][idx];
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ for (j = 0; j < 2; j++) {
+ vpds[j][i] = ar9170_interpolate_u8(f,
+ cal_freq_pier[idx],
+ cal_pier_data->vpd_pdg[j][i],
+ cal_freq_pier[idx + 1],
+ cal_pier_data[1].vpd_pdg[j][i]);
+
+ pwrs[j][i] = ar9170_interpolate_u8(f,
+ cal_freq_pier[idx],
+ cal_pier_data->pwr_pdg[j][i],
+ cal_freq_pier[idx + 1],
+ cal_pier_data[1].pwr_pdg[j][i]) / 2;
+ }
+ }
+
+ for (i = 0; i < 76; i++) {
+ u32 phy_data;
+ u8 tmp;
+
+ if (i < 25) {
+ tmp = ar9170_interpolate_val(i, &pwrs[0][0],
+ &vpds[0][0]);
+ } else {
+ tmp = ar9170_interpolate_val(i - 12,
+ &pwrs[1][0],
+ &vpds[1][0]);
+ }
+
+ phy_data |= tmp << ((i & 3) << 3);
+ if ((i & 3) == 3) {
+ ar9170_regwrite(0x1c6280 + chain * 0x1000 +
+ (i & ~3), phy_data);
+ phy_data = 0;
+ }
+ }
+
+ for (i = 19; i < 32; i++)
+ ar9170_regwrite(0x1c6280 + chain * 0x1000 + (i << 2),
+ 0x0);
+ }
+
+ ar9170_regwrite_finish();
+ return ar9170_regwrite_result();
+}
+
static int ar9170_set_power_cal(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
{
struct ar9170_calibration_target_power_legacy *ctpl;
@@ -1207,6 +1325,10 @@ int ar9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel,
if (err)
return err;
+ err = ar9170_set_freq_cal_data(ar, channel);
+ if (err)
+ return err;
+
err = ar9170_set_power_cal(ar, channel->center_freq, bw);
if (err)
return err;
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
