On 25 января 2009 22:59:35 Johannes Berg wrote: > unfortunately, your patch was line-wrapped. Cf. > Documentation/email-clients.txt > This should be updated to indicate that kmail from KDE4 is broken. I suspected that but so far it worked. Patch attached.
--- Begin Message ---
- Subject: [PATCH] orinoco: checkpatch cleanup
- From: Andrey Borzenkov <arvidjaar@xxxxxxxxx>
Fix errors and obvious warnings reported by checkpatch in all files except orinoco.c. Orinoco.c is part of different patch series of Dave. Signed-off-by: Andrey Borzenkov <arvidjaar@xxxxxxxxx> --- drivers/net/wireless/orinoco/airport.c | 35 +++++---- drivers/net/wireless/orinoco/hermes.c | 102 ++++++++++++++----------- drivers/net/wireless/orinoco/hermes.h | 35 +++++---- drivers/net/wireless/orinoco/orinoco.h | 17 ++-- drivers/net/wireless/orinoco/orinoco_cs.c | 31 ++++---- drivers/net/wireless/orinoco/orinoco_nortel.c | 7 +- drivers/net/wireless/orinoco/orinoco_pci.c | 5 + drivers/net/wireless/orinoco/orinoco_pci.h | 10 +- drivers/net/wireless/orinoco/orinoco_plx.c | 3 - drivers/net/wireless/orinoco/orinoco_tmd.c | 2 drivers/net/wireless/orinoco/spectrum_cs.c | 15 ++-- 11 files changed, 143 insertions(+), 119 deletions(-) diff --git a/drivers/net/wireless/orinoco/airport.c b/drivers/net/wireless/orinoco/airport.c index 28f1cae..5582dca 100644 --- a/drivers/net/wireless/orinoco/airport.c +++ b/drivers/net/wireless/orinoco/airport.c @@ -4,9 +4,9 @@ * card. * * Copyright notice & release notes in file orinoco.c - * + * * Note specific to airport stub: - * + * * 0.05 : first version of the new split driver * 0.06 : fix possible hang on powerup, add sleep support */ @@ -60,7 +60,8 @@ airport_suspend(struct macio_dev *mdev, pm_message_t state) orinoco_unlock(priv, &flags); disable_irq(dev->irq); - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0); + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, + macio_get_of_node(mdev), 0, 0); return 0; } @@ -75,7 +76,8 @@ airport_resume(struct macio_dev *mdev) printk(KERN_DEBUG "%s: Airport waking up\n", dev->name); - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1); + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, + macio_get_of_node(mdev), 0, 1); msleep(200); enable_irq(dev->irq); @@ -93,7 +95,7 @@ airport_resume(struct macio_dev *mdev) priv->hw_unavailable--; - if (priv->open && (! priv->hw_unavailable)) { + if (priv->open && (!priv->hw_unavailable)) { err = __orinoco_up(dev); if (err) printk(KERN_ERR "%s: Error %d restarting card on PBOOK_WAKE\n", @@ -127,7 +129,8 @@ airport_detach(struct macio_dev *mdev) macio_release_resource(mdev, 0); - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0); + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, + macio_get_of_node(mdev), 0, 0); ssleep(1); macio_set_drvdata(mdev, NULL); @@ -153,9 +156,11 @@ static int airport_hard_reset(struct orinoco_private *priv) * off. */ disable_irq(dev->irq); - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 0); + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, + macio_get_of_node(card->mdev), 0, 0); ssleep(1); - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 1); + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, + macio_get_of_node(card->mdev), 0, 1); ssleep(1); enable_irq(dev->irq); @@ -182,7 +187,7 @@ airport_attach(struct macio_dev *mdev, const struct of_device_id *match) /* Allocate space for private device-specific data */ dev = alloc_orinocodev(sizeof(*card), &mdev->ofdev.dev, airport_hard_reset, NULL); - if (! dev) { + if (!dev) { printk(KERN_ERR PFX "Cannot allocate network device\n"); return -ENODEV; } @@ -214,9 +219,10 @@ airport_attach(struct macio_dev *mdev, const struct of_device_id *match) } hermes_struct_init(hw, card->vaddr, HERMES_16BIT_REGSPACING); - + /* Power up card */ - pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1); + pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, + macio_get_of_node(mdev), 0, 1); ssleep(1); /* Reset it before we get the interrupt */ @@ -248,7 +254,7 @@ MODULE_AUTHOR("Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>"); MODULE_DESCRIPTION("Driver for the Apple Airport wireless card."); MODULE_LICENSE("Dual MPL/GPL"); -static struct of_device_id airport_match[] = +static struct of_device_id airport_match[] = { { .name = "radio", @@ -256,10 +262,9 @@ static struct of_device_id airport_match[] = {}, }; -MODULE_DEVICE_TABLE (of, airport_match); +MODULE_DEVICE_TABLE(of, airport_match); -static struct macio_driver airport_driver = -{ +static struct macio_driver airport_driver = { .name = DRIVER_NAME, .match_table = airport_match, .probe = airport_attach, diff --git a/drivers/net/wireless/orinoco/hermes.c b/drivers/net/wireless/orinoco/hermes.c index bfa3753..f48358f 100644 --- a/drivers/net/wireless/orinoco/hermes.c +++ b/drivers/net/wireless/orinoco/hermes.c @@ -15,7 +15,7 @@ * * Copyright (C) 2000, David Gibson, Linuxcare Australia. * (C) Copyright David Gibson, IBM Corp. 2001-2003. - * + * * The contents of this file are subject to the Mozilla Public License * Version 1.1 (the "License"); you may not use this file except in * compliance with the License. You may obtain a copy of the License @@ -45,7 +45,8 @@ #include "hermes.h" -MODULE_DESCRIPTION("Low-level driver helper for Lucent Hermes chipset and Prism II HFA384x wireless MAC controller"); +MODULE_DESCRIPTION("Low-level driver helper for Lucent Hermes chipset" + " and Prism II HFA384x wireless MAC controller"); MODULE_AUTHOR("Pavel Roskin <proski@xxxxxxx>" " & David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>"); MODULE_LICENSE("Dual MPL/GPL"); @@ -61,13 +62,13 @@ MODULE_LICENSE("Dual MPL/GPL"); */ #define DMSG(stuff...) do {printk(KERN_DEBUG "hermes @ %p: " , hw->iobase); \ - printk(stuff);} while (0) + printk(stuff); } while (0) #undef HERMES_DEBUG #ifdef HERMES_DEBUG #include <stdarg.h> -#define DEBUG(lvl, stuff...) if ( (lvl) <= HERMES_DEBUG) DMSG(stuff) +#define DEBUG(lvl, stuff...) if ((lvl) <= HERMES_DEBUG) DMSG(stuff) #else /* ! HERMES_DEBUG */ @@ -95,20 +96,19 @@ static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0, /* First wait for the command register to unbusy */ reg = hermes_read_regn(hw, CMD); - while ( (reg & HERMES_CMD_BUSY) && k ) { + while ((reg & HERMES_CMD_BUSY) && k) { k--; udelay(1); reg = hermes_read_regn(hw, CMD); } - if (reg & HERMES_CMD_BUSY) { + if (reg & HERMES_CMD_BUSY) return -EBUSY; - } hermes_write_regn(hw, PARAM2, param2); hermes_write_regn(hw, PARAM1, param1); hermes_write_regn(hw, PARAM0, param0); hermes_write_regn(hw, CMD, cmd); - + return 0; } @@ -191,23 +191,23 @@ int hermes_init(hermes_t *hw) hermes_write_regn(hw, EVACK, 0xffff); /* Normally it's a "can't happen" for the command register to - be busy when we go to issue a command because we are - serializing all commands. However we want to have some - chance of resetting the card even if it gets into a stupid - state, so we actually wait to see if the command register - will unbusy itself here. */ + be busy when we go to issue a command because we are + serializing all commands. However we want to have some + chance of resetting the card even if it gets into a stupid + state, so we actually wait to see if the command register + will unbusy itself here. */ k = CMD_BUSY_TIMEOUT; reg = hermes_read_regn(hw, CMD); while (k && (reg & HERMES_CMD_BUSY)) { - if (reg == 0xffff) /* Special case - the card has probably been removed, - so don't wait for the timeout */ + if (reg == 0xffff) /* Special case - the card has probably been + removed, so don't wait for the timeout */ return -ENODEV; k--; udelay(1); reg = hermes_read_regn(hw, CMD); } - + /* No need to explicitly handle the timeout - if we've timed out hermes_issue_cmd() will probably return -EBUSY below */ @@ -228,7 +228,10 @@ EXPORT_SYMBOL(hermes_init); /* Issue a command to the chip, and (busy!) wait for it to * complete. * - * Returns: < 0 on internal error, 0 on success, > 0 on error returned by the firmware + * Returns: + * < 0 on internal error + * 0 on success + * > 0 on error returned by the firmware * * Callable from any context, but locking is your problem. */ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, @@ -241,13 +244,13 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, err = hermes_issue_cmd(hw, cmd, parm0, 0, 0); if (err) { - if (! hermes_present(hw)) { + if (!hermes_present(hw)) { if (net_ratelimit()) printk(KERN_WARNING "hermes @ %p: " "Card removed while issuing command " "0x%04x.\n", hw->iobase, cmd); err = -ENODEV; - } else + } else if (net_ratelimit()) printk(KERN_ERR "hermes @ %p: " "Error %d issuing command 0x%04x.\n", @@ -257,21 +260,21 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, reg = hermes_read_regn(hw, EVSTAT); k = CMD_COMPL_TIMEOUT; - while ( (! (reg & HERMES_EV_CMD)) && k) { + while ((!(reg & HERMES_EV_CMD)) && k) { k--; udelay(10); reg = hermes_read_regn(hw, EVSTAT); } - if (! hermes_present(hw)) { + if (!hermes_present(hw)) { printk(KERN_WARNING "hermes @ %p: Card removed " "while waiting for command 0x%04x completion.\n", hw->iobase, cmd); err = -ENODEV; goto out; } - - if (! (reg & HERMES_EV_CMD)) { + + if (!(reg & HERMES_EV_CMD)) { printk(KERN_ERR "hermes @ %p: Timeout waiting for " "command 0x%04x completion.\n", hw->iobase, cmd); err = -ETIMEDOUT; @@ -301,31 +304,30 @@ int hermes_allocate(hermes_t *hw, u16 size, u16 *fid) int err = 0; int k; u16 reg; - - if ( (size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX) ) + + if ((size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX)) return -EINVAL; err = hermes_docmd_wait(hw, HERMES_CMD_ALLOC, size, NULL); - if (err) { + if (err) return err; - } reg = hermes_read_regn(hw, EVSTAT); k = ALLOC_COMPL_TIMEOUT; - while ( (! (reg & HERMES_EV_ALLOC)) && k) { + while ((!(reg & HERMES_EV_ALLOC)) && k) { k--; udelay(10); reg = hermes_read_regn(hw, EVSTAT); } - - if (! hermes_present(hw)) { + + if (!hermes_present(hw)) { printk(KERN_WARNING "hermes @ %p: " "Card removed waiting for frame allocation.\n", hw->iobase); return -ENODEV; } - - if (! (reg & HERMES_EV_ALLOC)) { + + if (!(reg & HERMES_EV_ALLOC)) { printk(KERN_ERR "hermes @ %p: " "Timeout waiting for frame allocation\n", hw->iobase); @@ -334,14 +336,17 @@ int hermes_allocate(hermes_t *hw, u16 size, u16 *fid) *fid = hermes_read_regn(hw, ALLOCFID); hermes_write_regn(hw, EVACK, HERMES_EV_ALLOC); - + return 0; } EXPORT_SYMBOL(hermes_allocate); /* Set up a BAP to read a particular chunk of data from card's internal buffer. * - * Returns: < 0 on internal failure (errno), 0 on success, >0 on error + * Returns: + * < 0 on internal failure (errno) + * 0 on success + * > 0 on error * from firmware * * Callable from any context */ @@ -353,7 +358,7 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset) u16 reg; /* Paranoia.. */ - if ( (offset > HERMES_BAP_OFFSET_MAX) || (offset % 2) ) + if ((offset > HERMES_BAP_OFFSET_MAX) || (offset % 2)) return -EINVAL; k = HERMES_BAP_BUSY_TIMEOUT; @@ -374,7 +379,7 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset) /* Wait for the BAP to be ready */ k = HERMES_BAP_BUSY_TIMEOUT; reg = hermes_read_reg(hw, oreg); - while ( (reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) { + while ((reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) { k--; udelay(1); reg = hermes_read_reg(hw, oreg); @@ -386,9 +391,8 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset) (reg & HERMES_OFFSET_BUSY) ? "timeout" : "error", reg, id, offset); - if (reg & HERMES_OFFSET_BUSY) { + if (reg & HERMES_OFFSET_BUSY) return -ETIMEDOUT; - } return -EIO; /* error or wrong offset */ } @@ -400,7 +404,10 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset) * BAP. Synchronization/serialization is the caller's problem. len * must be even. * - * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware + * Returns: + * < 0 on internal failure (errno) + * 0 on success + * > 0 on error from firmware */ int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, u16 id, u16 offset) @@ -408,7 +415,7 @@ int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; int err = 0; - if ( (len < 0) || (len % 2) ) + if ((len < 0) || (len % 2)) return -EINVAL; err = hermes_bap_seek(hw, bap, id, offset); @@ -426,7 +433,10 @@ EXPORT_SYMBOL(hermes_bap_pread); /* Write a block of data to the chip's buffer, via the * BAP. Synchronization/serialization is the caller's problem. * - * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware + * Returns: + * < 0 on internal failure (errno) + * 0 on success + * > 0 on error from firmware */ int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len, u16 id, u16 offset) @@ -440,11 +450,11 @@ int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len, err = hermes_bap_seek(hw, bap, id, offset); if (err) goto out; - + /* Actually do the transfer */ hermes_write_bytes(hw, dreg, buf, len); - out: + out: return err; } EXPORT_SYMBOL(hermes_bap_pwrite); @@ -465,7 +475,7 @@ int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize, u16 rlength, rtype; unsigned nwords; - if ( (bufsize < 0) || (bufsize % 2) ) + if ((bufsize < 0) || (bufsize % 2)) return -EINVAL; err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS, rid, NULL); @@ -478,7 +488,7 @@ int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize, rlength = hermes_read_reg(hw, dreg); - if (! rlength) + if (!rlength) return -ENODATA; rtype = hermes_read_reg(hw, dreg); @@ -503,7 +513,7 @@ int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize, } EXPORT_SYMBOL(hermes_read_ltv); -int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, +int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, u16 length, const void *value) { int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; diff --git a/drivers/net/wireless/orinoco/hermes.h b/drivers/net/wireless/orinoco/hermes.h index 8b13c8f..c78c442 100644 --- a/drivers/net/wireless/orinoco/hermes.h +++ b/drivers/net/wireless/orinoco/hermes.h @@ -15,7 +15,8 @@ * Copyright (C) 2000, David Gibson, Linuxcare Australia. * (C) Copyright David Gibson, IBM Corp. 2001-2003. * - * Portions taken from hfa384x.h, Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. + * Portions taken from hfa384x.h. + * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. * * This file distributed under the GPL, version 2. */ @@ -31,7 +32,7 @@ */ #include <linux/if_ether.h> -#include <asm/io.h> +#include <linux/io.h> /* * Limits and constants @@ -203,7 +204,7 @@ struct hermes_tx_descriptor { __le32 sw_support; u8 retry_count; u8 tx_rate; - __le16 tx_control; + __le16 tx_control; } __attribute__ ((packed)); #define HERMES_TXSTAT_RETRYERR (0x0001) @@ -298,7 +299,7 @@ struct symbol_scan_apinfo { /* bits: 0-ess, 1-ibss, 4-privacy [wep] */ __le16 essid_len; /* ESSID length */ u8 essid[32]; /* ESSID of the network */ - __le16 rates[5]; /* Bit rate supported */ + __le16 rates[5]; /* Bit rate supported */ __le16 basic_rates; /* Basic rates bitmask */ u8 unknown2[6]; /* Always FF:FF:FF:FF:00:00 */ u8 unknown3[8]; /* Always 0, appeared in f/w 3.91-68 */ @@ -344,14 +345,14 @@ struct agere_ext_scan_info { u8 data[316]; } __attribute__ ((packed)); -#define HERMES_LINKSTATUS_NOT_CONNECTED (0x0000) +#define HERMES_LINKSTATUS_NOT_CONNECTED (0x0000) #define HERMES_LINKSTATUS_CONNECTED (0x0001) #define HERMES_LINKSTATUS_DISCONNECTED (0x0002) #define HERMES_LINKSTATUS_AP_CHANGE (0x0003) #define HERMES_LINKSTATUS_AP_OUT_OF_RANGE (0x0004) #define HERMES_LINKSTATUS_AP_IN_RANGE (0x0005) #define HERMES_LINKSTATUS_ASSOC_FAILED (0x0006) - + struct hermes_linkstatus { __le16 linkstatus; /* Link status */ } __attribute__ ((packed)); @@ -384,11 +385,12 @@ typedef struct hermes { /* Register access convenience macros */ #define hermes_read_reg(hw, off) \ - (ioread16((hw)->iobase + ( (off) << (hw)->reg_spacing ))) + (ioread16((hw)->iobase + ((off) << (hw)->reg_spacing))) #define hermes_write_reg(hw, off, val) \ (iowrite16((val), (hw)->iobase + ((off) << (hw)->reg_spacing))) #define hermes_read_regn(hw, name) hermes_read_reg((hw), HERMES_##name) -#define hermes_write_regn(hw, name, val) hermes_write_reg((hw), HERMES_##name, (val)) +#define hermes_write_regn(hw, name, val) \ + hermes_write_reg((hw), HERMES_##name, (val)) /* Function prototypes */ void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing); @@ -430,7 +432,7 @@ static inline int hermes_enable_port(hermes_t *hw, int port) static inline int hermes_disable_port(hermes_t *hw, int port) { - return hermes_docmd_wait(hw, HERMES_CMD_DISABLE | (port << 8), + return hermes_docmd_wait(hw, HERMES_CMD_DISABLE | (port << 8), 0, NULL); } @@ -441,11 +443,12 @@ static inline int hermes_inquire(hermes_t *hw, u16 rid) return hermes_docmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL); } -#define HERMES_BYTES_TO_RECLEN(n) ( (((n)+1)/2) + 1 ) -#define HERMES_RECLEN_TO_BYTES(n) ( ((n)-1) * 2 ) +#define HERMES_BYTES_TO_RECLEN(n) ((((n)+1)/2) + 1) +#define HERMES_RECLEN_TO_BYTES(n) (((n)-1) * 2) /* Note that for the next two, the count is in 16-bit words, not bytes */ -static inline void hermes_read_words(struct hermes *hw, int off, void *buf, unsigned count) +static inline void hermes_read_words(struct hermes *hw, int off, + void *buf, unsigned count) { off = off << hw->reg_spacing; ioread16_rep(hw->iobase + off, buf, count); @@ -460,7 +463,8 @@ static inline void hermes_write_bytes(struct hermes *hw, int off, iowrite8(buf[count - 1], hw->iobase + off); } -static inline void hermes_clear_words(struct hermes *hw, int off, unsigned count) +static inline void hermes_clear_words(struct hermes *hw, int off, + unsigned count) { unsigned i; @@ -471,9 +475,10 @@ static inline void hermes_clear_words(struct hermes *hw, int off, unsigned count } #define HERMES_READ_RECORD(hw, bap, rid, buf) \ - (hermes_read_ltv((hw),(bap),(rid), sizeof(*buf), NULL, (buf))) + (hermes_read_ltv((hw), (bap), (rid), sizeof(*buf), NULL, (buf))) #define HERMES_WRITE_RECORD(hw, bap, rid, buf) \ - (hermes_write_ltv((hw),(bap),(rid),HERMES_BYTES_TO_RECLEN(sizeof(*buf)),(buf))) + (hermes_write_ltv((hw), (bap), (rid), \ + HERMES_BYTES_TO_RECLEN(sizeof(*buf)), (buf))) static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word) { diff --git a/drivers/net/wireless/orinoco/orinoco.h b/drivers/net/wireless/orinoco/orinoco.h index 00750c8..096f004 100644 --- a/drivers/net/wireless/orinoco/orinoco.h +++ b/drivers/net/wireless/orinoco/orinoco.h @@ -1,5 +1,5 @@ /* orinoco.h - * + * * Common definitions to all pieces of the various orinoco * drivers */ @@ -18,9 +18,9 @@ #include "hermes.h" /* To enable debug messages */ -//#define ORINOCO_DEBUG 3 +/*#define ORINOCO_DEBUG 3*/ -#define WIRELESS_SPY // enable iwspy support +#define WIRELESS_SPY /* enable iwspy support */ #define MAX_SCAN_LEN 4096 @@ -130,7 +130,7 @@ struct orinoco_private { u16 encode_alg, wep_restrict, tx_key; struct orinoco_key keys[ORINOCO_MAX_KEYS]; int bitratemode; - char nick[IW_ESSID_MAX_SIZE+1]; + char nick[IW_ESSID_MAX_SIZE+1]; char desired_essid[IW_ESSID_MAX_SIZE+1]; char desired_bssid[ETH_ALEN]; int bssid_fixed; @@ -140,7 +140,7 @@ struct orinoco_private { u16 pm_on, pm_mcast, pm_period, pm_timeout; u16 preamble; #ifdef WIRELESS_SPY - struct iw_spy_data spy_data; /* iwspy support */ + struct iw_spy_data spy_data; /* iwspy support */ struct iw_public_data wireless_data; #endif @@ -177,7 +177,10 @@ struct orinoco_private { #ifdef ORINOCO_DEBUG extern int orinoco_debug; -#define DEBUG(n, args...) do { if (orinoco_debug>(n)) printk(KERN_DEBUG args); } while(0) +#define DEBUG(n, args...) do { \ + if (orinoco_debug > (n)) \ + printk(KERN_DEBUG args); \ +} while (0) #else #define DEBUG(n, args...) do { } while (0) #endif /* ORINOCO_DEBUG */ @@ -194,7 +197,7 @@ extern void free_orinocodev(struct net_device *dev); extern int __orinoco_up(struct net_device *dev); extern int __orinoco_down(struct net_device *dev); extern int orinoco_reinit_firmware(struct net_device *dev); -extern irqreturn_t orinoco_interrupt(int irq, void * dev_id); +extern irqreturn_t orinoco_interrupt(int irq, void *dev_id); /********************************************************************/ /* Locking and synchronization functions */ diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index 0b32215..d194b3e 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -6,7 +6,7 @@ * It should also be usable on various Prism II based cards such as the * Linksys, D-Link and Farallon Skyline. It should also work on Symbol * cards such as the 3Com AirConnect and Ericsson WLAN. - * + * * Copyright notice & release notes in file orinoco.c */ @@ -30,7 +30,8 @@ /********************************************************************/ MODULE_AUTHOR("David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>"); -MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards"); +MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco," + " Prism II based and similar wireless cards"); MODULE_LICENSE("Dual MPL/GPL"); /* Module parameters */ @@ -53,8 +54,8 @@ struct orinoco_pccard { /* Used to handle hard reset */ /* yuck, we need this hack to work around the insanity of the - * PCMCIA layer */ - unsigned long hard_reset_in_progress; + * PCMCIA layer */ + unsigned long hard_reset_in_progress; }; @@ -98,7 +99,7 @@ orinoco_cs_hard_reset(struct orinoco_private *priv) * This creates an "instance" of the driver, allocating local data * structures for one device. The device is registered with Card * Services. - * + * * The dev_link structure is initialized, but we don't actually * configure the card at this point -- we wait until we receive a card * insertion event. */ @@ -111,7 +112,7 @@ orinoco_cs_probe(struct pcmcia_device *link) dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link), orinoco_cs_hard_reset, NULL); - if (! dev) + if (!dev) return -ENOMEM; priv = netdev_priv(dev); card = priv->card; @@ -124,7 +125,7 @@ orinoco_cs_probe(struct pcmcia_device *link) link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = orinoco_interrupt; - link->irq.Instance = dev; + link->irq.Instance = dev; /* General socket configuration defaults can go here. In this * client, we assume very little, and rely on the CIS for @@ -162,8 +163,10 @@ static void orinoco_cs_detach(struct pcmcia_device *link) */ #define CS_CHECK(fn, ret) do { \ - last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \ - } while (0) + last_fn = (fn); \ + if ((last_ret = (ret)) != 0) \ + goto cs_failed; \ +} while (0) static int orinoco_cs_config_check(struct pcmcia_device *p_dev, cistpl_cftable_entry_t *cfg, @@ -307,8 +310,8 @@ orinoco_cs_config(struct pcmcia_device *link) * initialized and arranged in a linked list at link->dev_node. */ strcpy(card->node.dev_name, dev->name); link->dev_node = &card->node; /* link->dev_node being non-NULL is also - used to indicate that the - net_device has been registered */ + * used to indicate that the + * net_device has been registered */ /* Finally, report what we've done */ printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io " @@ -359,7 +362,7 @@ static int orinoco_cs_suspend(struct pcmcia_device *link) /* This is probably racy, but I can't think of a better way, short of rewriting the PCMCIA layer to not suck :-( */ - if (! test_bit(0, &card->hard_reset_in_progress)) { + if (!test_bit(0, &card->hard_reset_in_progress)) { spin_lock_irqsave(&priv->lock, flags); err = __orinoco_down(dev); @@ -384,7 +387,7 @@ static int orinoco_cs_resume(struct pcmcia_device *link) int err = 0; unsigned long flags; - if (! test_bit(0, &card->hard_reset_in_progress)) { + if (!test_bit(0, &card->hard_reset_in_progress)) { err = orinoco_reinit_firmware(dev); if (err) { printk(KERN_ERR "%s: Error %d re-initializing firmware\n", @@ -397,7 +400,7 @@ static int orinoco_cs_resume(struct pcmcia_device *link) netif_device_attach(dev); priv->hw_unavailable--; - if (priv->open && ! priv->hw_unavailable) { + if (priv->open && !priv->hw_unavailable) { err = __orinoco_up(dev); if (err) printk(KERN_ERR "%s: Error %d restarting card\n", diff --git a/drivers/net/wireless/orinoco/orinoco_nortel.c b/drivers/net/wireless/orinoco/orinoco_nortel.c index 2fc8659..b017262 100644 --- a/drivers/net/wireless/orinoco/orinoco_nortel.c +++ b/drivers/net/wireless/orinoco/orinoco_nortel.c @@ -9,12 +9,12 @@ * * Some of this code is borrowed from orinoco_plx.c * Copyright (C) 2001 Daniel Barlow - * Some of this code is borrowed from orinoco_pci.c + * Some of this code is borrowed from orinoco_pci.c * Copyright (C) 2001 Jean Tourrilhes * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing * has been copied from it. linux-wlan-ng-0.1.10 is originally : * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. - * + * * The contents of this file are subject to the Mozilla Public License * Version 1.1 (the "License"); you may not use this file except in * compliance with the License. You may obtain a copy of the License @@ -103,9 +103,8 @@ static int orinoco_nortel_hw_init(struct orinoco_pci_card *card) iowrite16(0x8, card->bridge_io + 2); for (i = 0; i < 30; i++) { mdelay(30); - if (ioread16(card->bridge_io) & 0x10) { + if (ioread16(card->bridge_io) & 0x10) break; - } } if (i == 30) { printk(KERN_ERR PFX "brg1 timed out\n"); diff --git a/drivers/net/wireless/orinoco/orinoco_pci.c b/drivers/net/wireless/orinoco/orinoco_pci.c index 4ebd638..78cafff 100644 --- a/drivers/net/wireless/orinoco/orinoco_pci.c +++ b/drivers/net/wireless/orinoco/orinoco_pci.c @@ -1,5 +1,5 @@ /* orinoco_pci.c - * + * * Driver for Prism 2.5/3 devices that have a direct PCI interface * (i.e. these are not PCMCIA cards in a PCMCIA-to-PCI bridge). * The card contains only one PCI region, which contains all the usual @@ -237,7 +237,8 @@ static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION " (Pavel Roskin <proski@xxxxxxx>," " David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx> &" " Jean Tourrilhes <jt@xxxxxxxxxx>)"; -MODULE_AUTHOR("Pavel Roskin <proski@xxxxxxx> & David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>"); +MODULE_AUTHOR("Pavel Roskin <proski@xxxxxxx> &" + " David Gibson <hermes@xxxxxxxxxxxxxxxxxxxxx>"); MODULE_DESCRIPTION("Driver for wireless LAN cards using direct PCI interface"); MODULE_LICENSE("Dual MPL/GPL"); diff --git a/drivers/net/wireless/orinoco/orinoco_pci.h b/drivers/net/wireless/orinoco/orinoco_pci.h index f4e5e06..88df3ee 100644 --- a/drivers/net/wireless/orinoco/orinoco_pci.h +++ b/drivers/net/wireless/orinoco/orinoco_pci.h @@ -1,5 +1,5 @@ /* orinoco_pci.h - * + * * Common code for all Orinoco drivers for PCI devices, including * both native PCI and PCMCIA-to-PCI bridges. * @@ -37,11 +37,11 @@ static int orinoco_pci_suspend(struct pci_dev *pdev, pm_message_t state) if (err) printk(KERN_WARNING "%s: error %d bringing interface down " "for suspend\n", dev->name, err); - + netif_device_detach(dev); priv->hw_unavailable++; - + orinoco_unlock(priv, &flags); free_irq(pdev->irq, dev); @@ -90,13 +90,13 @@ static int orinoco_pci_resume(struct pci_dev *pdev) priv->hw_unavailable--; - if (priv->open && (! priv->hw_unavailable)) { + if (priv->open && (!priv->hw_unavailable)) { err = __orinoco_up(dev); if (err) printk(KERN_ERR "%s: Error %d restarting card on resume\n", dev->name, err); } - + spin_unlock_irqrestore(&priv->lock, flags); return 0; diff --git a/drivers/net/wireless/orinoco/orinoco_plx.c b/drivers/net/wireless/orinoco/orinoco_plx.c index ef76185..a2a4471 100644 --- a/drivers/net/wireless/orinoco/orinoco_plx.c +++ b/drivers/net/wireless/orinoco/orinoco_plx.c @@ -146,9 +146,8 @@ static int orinoco_plx_hw_init(struct orinoco_pci_card *card) }; printk(KERN_DEBUG PFX "CIS: "); - for (i = 0; i < 16; i++) { + for (i = 0; i < 16; i++) printk("%02X:", ioread8(card->attr_io + (i << 1))); - } printk("\n"); /* Verify whether a supported PC card is present */ diff --git a/drivers/net/wireless/orinoco/orinoco_tmd.c b/drivers/net/wireless/orinoco/orinoco_tmd.c index ede24ec..e77c404 100644 --- a/drivers/net/wireless/orinoco/orinoco_tmd.c +++ b/drivers/net/wireless/orinoco/orinoco_tmd.c @@ -1,7 +1,7 @@ /* orinoco_tmd.c * * Driver for Prism II devices which would usually be driven by orinoco_cs, - * but are connected to the PCI bus by a TMD7160. + * but are connected to the PCI bus by a TMD7160. * * Copyright (C) 2003 Joerg Dorchain <joerg AT dorchain.net> * based heavily upon orinoco_plx.c Copyright (C) 2001 Daniel Barlow diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index b2ca2e3..9aefe19 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -133,7 +133,7 @@ spectrum_reset(struct pcmcia_device *link, int idle) udelay(1000); return 0; - cs_failed: +cs_failed: cs_error(link, last_fn, last_ret); return -ENODEV; } @@ -171,7 +171,7 @@ spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle) * This creates an "instance" of the driver, allocating local data * structures for one device. The device is registered with Card * Services. - * + * * The dev_link structure is initialized, but we don't actually * configure the card at this point -- we wait until we receive a card * insertion event. */ @@ -185,7 +185,7 @@ spectrum_cs_probe(struct pcmcia_device *link) dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link), spectrum_cs_hard_reset, spectrum_cs_stop_firmware); - if (! dev) + if (!dev) return -ENOMEM; priv = netdev_priv(dev); card = priv->card; @@ -198,7 +198,7 @@ spectrum_cs_probe(struct pcmcia_device *link) link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; link->irq.IRQInfo1 = IRQ_LEVEL_ID; link->irq.Handler = orinoco_interrupt; - link->irq.Instance = dev; + link->irq.Instance = dev; /* General socket configuration defaults can go here. In this * client, we assume very little, and rely on the CIS for @@ -367,9 +367,8 @@ spectrum_cs_config(struct pcmcia_device *link) card->node.major = card->node.minor = 0; /* Reset card */ - if (spectrum_cs_hard_reset(priv) != 0) { + if (spectrum_cs_hard_reset(priv) != 0) goto failed; - } SET_NETDEV_DEV(dev, &handle_to_dev(link)); /* Tell the stack we exist */ @@ -382,8 +381,8 @@ spectrum_cs_config(struct pcmcia_device *link) * initialized and arranged in a linked list at link->dev_node. */ strcpy(card->node.dev_name, dev->name); link->dev_node = &card->node; /* link->dev_node being non-NULL is also - used to indicate that the - net_device has been registered */ + * used to indicate that the + * net_device has been registered */ /* Finally, report what we've done */ printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
--- End Message ---
Attachment:
signature.asc
Description: This is a digitally signed message part.
