We are going to implement MLO for WiFi 7 chips, so enable hardware DBCC
support that turns on MAC-0/-1 and PHY-0/-1, and configures MAC quota
buffer as desired. During these development, we found some registers are
not properly set for MAC-1 and PHY-1, so correct them along with this
patchset.
Chih-Kang Chang (1):
wifi: rtw89: 8922a: implement AP mode related reg for BE generation
Ping-Ke Shih (8):
wifi: rtw89: correct PHY register offset for PHY-1
wifi: rtw89: load BB parameters to PHY-1
wifi: rtw89: mac: return held quota of DLE when changing MAC-1
wifi: rtw89: mac: correct MUEDCA setting for MAC-1
wifi: rtw89: mac: reset PHY-1 hardware when going to enable/disable
wifi: rtw89: use PLCP information to match BSS_COLOR and AID
wifi: rtw89: 8922a: correct register definition and merge IO for
ctrl_nbtg_bt_tx()
wifi: rtw89: change qutoa to DBCC by default for WiFi 7 chips
Po-Hao Huang (1):
wifi: rtw89: reference quota mode when setting Tx power
Zong-Zhe Yang (1):
wifi: rtw89: differentiate narrow_bw_ru_dis setting according to chip
gen
drivers/net/wireless/realtek/rtw89/core.c | 8 +-
drivers/net/wireless/realtek/rtw89/core.h | 4 +
drivers/net/wireless/realtek/rtw89/mac.c | 58 ++++++++----
drivers/net/wireless/realtek/rtw89/mac.h | 5 +-
drivers/net/wireless/realtek/rtw89/mac_be.c | 93 ++++++++++++++++++-
drivers/net/wireless/realtek/rtw89/phy.c | 42 ++++++---
drivers/net/wireless/realtek/rtw89/phy.h | 1 +
drivers/net/wireless/realtek/rtw89/phy_be.c | 19 ++++
drivers/net/wireless/realtek/rtw89/reg.h | 36 ++++++-
drivers/net/wireless/realtek/rtw89/rtw8922a.c | 37 +++-----
10 files changed, 242 insertions(+), 61 deletions(-)
--
2.25.1
