We are going to support MLO/DBCC, so need to load parameter table to PHY-1 as well. Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx> --- drivers/net/wireless/realtek/rtw89/phy.c | 29 ++++++++++++++++-------- 1 file changed, 20 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/realtek/rtw89/phy.c b/drivers/net/wireless/realtek/rtw89/phy.c index 7c2f0ba996b1..389eb01d303c 100644 --- a/drivers/net/wireless/realtek/rtw89/phy.c +++ b/drivers/net/wireless/realtek/rtw89/phy.c @@ -1025,22 +1025,30 @@ static void rtw89_phy_config_bb_reg(struct rtw89_dev *rtwdev, enum rtw89_rf_path rf_path, void *extra_data) { - if (reg->addr == 0xfe) + u32 addr; + + if (reg->addr == 0xfe) { mdelay(50); - else if (reg->addr == 0xfd) + } else if (reg->addr == 0xfd) { mdelay(5); - else if (reg->addr == 0xfc) + } else if (reg->addr == 0xfc) { mdelay(1); - else if (reg->addr == 0xfb) + } else if (reg->addr == 0xfb) { udelay(50); - else if (reg->addr == 0xfa) + } else if (reg->addr == 0xfa) { udelay(5); - else if (reg->addr == 0xf9) + } else if (reg->addr == 0xf9) { udelay(1); - else if (reg->data == BYPASS_CR_DATA) + } else if (reg->data == BYPASS_CR_DATA) { rtw89_debug(rtwdev, RTW89_DBG_PHY_TRACK, "Bypass CR 0x%x\n", reg->addr); - else - rtw89_phy_write32(rtwdev, reg->addr, reg->data); + } else { + addr = reg->addr; + + if ((enum rtw89_phy_idx)extra_data == RTW89_PHY_1) + addr += rtw89_phy0_phy1_offset(rtwdev, reg->addr); + + rtw89_phy_write32(rtwdev, addr, reg->data); + } } union rtw89_phy_bb_gain_arg { @@ -1554,6 +1562,9 @@ void rtw89_phy_init_bb_reg(struct rtw89_dev *rtwdev) bb_table = elm_info->bb_tbl ? elm_info->bb_tbl : chip->bb_table; rtw89_phy_init_reg(rtwdev, bb_table, rtw89_phy_config_bb_reg, NULL); + if (rtwdev->dbcc_en) + rtw89_phy_init_reg(rtwdev, bb_table, rtw89_phy_config_bb_reg, + (void *)RTW89_PHY_1); rtw89_chip_init_txpwr_unit(rtwdev, RTW89_PHY_0); bb_gain_table = elm_info->bb_gain ? elm_info->bb_gain : chip->bb_gain_table; -- 2.25.1