When going to use PHY-1, reset the hardware to make it work properly.
Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
---
drivers/net/wireless/realtek/rtw89/mac_be.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw89/mac_be.c b/drivers/net/wireless/realtek/rtw89/mac_be.c
index fdbfb76f97ee..f3c82751993c 100644
--- a/drivers/net/wireless/realtek/rtw89/mac_be.c
+++ b/drivers/net/wireless/realtek/rtw89/mac_be.c
@@ -1546,6 +1546,13 @@ static int preload_init_be(struct rtw89_dev *rtwdev, u8 mac_idx,
static int dbcc_bb_ctrl_be(struct rtw89_dev *rtwdev, bool bb1_en)
{
+ u32 set = B_BE_FEN_BB1PLAT_RSTB | B_BE_FEN_BB1_IP_RSTN;
+
+ if (bb1_en)
+ rtw89_write32_set(rtwdev, R_BE_FEN_RST_ENABLE, set);
+ else
+ rtw89_write32_clr(rtwdev, R_BE_FEN_RST_ENABLE, set);
+
return 0;
}
--
2.25.1
