On Sun, Nov 2, 2008 at 1:10 AM, Nick Kossifidis <mickflemm@xxxxxxxxx> wrote: > 2008/11/2 Nick Kossifidis <mickflemm@xxxxxxxxx>: >> 2008/11/1 Luis R. Rodriguez <mcgrof@xxxxxxxxx>: >>> On Wed, Oct 29, 2008 at 12:19 PM, Tim Gardner <tcanonical@xxxxxxx> wrote: >>>> This commit 'ath5k: Update interrupt masking code' causes stalls under >>>> load when built using compat-wireless on 2.6.27. There is no output from >>>> dmesg, but it occasionally recovers and moves a few more packets before >>>> stalling again. Luis suggested reverting >>>> eb9d4e8399181357cb6f6625ba7f849987432c6c which I did. Now it appears to >>>> work normally. >>>> >>>> I also think this patch should be broken into multiple pieces. There >>>> appear to be at least 3 functional changes addressed in this single patch. >>> >>> Agreed, I just tested with the latest wireless-testing and the issue >>> is still present. I reviewed the commit but its a big too large to pin >>> point the exact issue, my AR5414 goes up but then quickly becomes >>> unusable. Nick how about we revert this and you can then split this up >>> into a good number of patches to make the review easier and also to be >>> able to pin point the exact issue better? >>> >>> The SHA1 remains the same but just in case the title of the patch is: >>> >>> ath5k: Update interrupt masking code >>> >>> With it reverted I'm cruising and can ditch MadWifi completely, which >>> is the idea. >>> >>> Luis >>> >> > > Can you test the attached patch ? > > It works for me (tested on a AR5413)... Thanks, that fixes it. Luis -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
