Em Fri, 31 Oct 2008 18:26:28 +0200 "Nick Kossifidis" <mickflemm@xxxxxxxxx> escreveu: | 2008/10/31 Luiz Fernando N. Capitulino <lcapitulino@xxxxxxxxxxxxxxx>: | > | > Hi guys, | > | > If I do a 'rmmod eeepc-laptop', while connected to my AP, I get the | > following error messages from ath5k: | > | > """ | > ath5k phy0: noise floor calibration timeout (2417MHz) | > ath5k phy0: failed to wakeup the MAC Chip | > ath5k phy0: can't reset hardware (-5) | > ath5k phy0: failed to wakeup the MAC Chip | > ath5k phy0: can't reset hardware (-5) | > wlan0: No ProbeResp from current AP 00:1d:0f:e9:c7:c0 - assume out of range | > ath5k phy0: failed to wakeup the MAC Chip | > ath5k phy0: ath5k_chan_set: unable to reset channel (2412 Mhz) | > wlan0: failed to set freq to 2412 MHz for scan | > ath5k phy0: failed to wakeup the MAC Chip | > ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz) | > wlan0: failed to set freq to 2417 MHz for scan | > ath5k phy0: failed to wakeup the MAC Chip | > ath5k phy0: ath5k_chan_set: unable to reset channel (2422 Mhz) | > wlan0: failed to set freq to 2422 MHz for scan | > ath5k phy0: failed to wakeup the MAC Chip | > ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz) | > wlan0: failed to set freq to 2427 MHz for scan | > ath5k phy0: failed to wakeup the MAC Chip | > ath5k phy0: ath5k_chan_set: unable to reset channel (2432 Mhz) | > wlan0: failed to set freq to 2432 MHz for scan | > wlan0: failed to set freq to 2437 MHz for scan | > wlan0: failed to set freq to 2442 MHz for scan | > wlan0: failed to set freq to 2447 MHz for scan | > wlan0: failed to set freq to 2452 MHz for scan | > wlan0: failed to set freq to 2457 MHz for scan | > wlan0: failed to set freq to 2462 MHz for scan | > wlan0: failed to set freq to 2467 MHz for scan | > wlan0: failed to set freq to 2472 MHz for scan | > wlan0: failed to set freq to 2484 MHz for scan | > wlan0: failed to restore operational channel after scan | > wlan0: authenticate with AP 00:1d:0f:e9:c7:c0 | > wlan0: authenticate with AP 00:1d:0f:e9:c7:c0 | > wlan0: authenticate with AP 00:1d:0f:e9:c7:c0 | > wlan0: authentication with AP 00:1d:0f:e9:c7:c0 timed out | > """ | > | > Then I lost my wireless connection. | > | > I'm running latest Linus git tree (2.6.28-rc2) on a Eeepc 701. | > | > The problem doesn't happen on 2.6.27.4, but as 2.6.28-rc1 doesn't | > boot on this machine, it would be a bit difficult to bisect it. | > | > Thanks. | > | | After this does ath_info work ? No, it doesn't. It says: """ MAC revision 0xffff is not supported! """ And I have realized that I get a flood of 'failed to wakeup' and 'can't reset the hardware' error messages, just some seconds after the eeepc-laptop module removal. -- Luiz Fernando N. Capitulino -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
