2008/10/31 Luiz Fernando N. Capitulino <lcapitulino@xxxxxxxxxxxxxxx>: > > Hi guys, > > If I do a 'rmmod eeepc-laptop', while connected to my AP, I get the > following error messages from ath5k: > > """ > ath5k phy0: noise floor calibration timeout (2417MHz) > ath5k phy0: failed to wakeup the MAC Chip > ath5k phy0: can't reset hardware (-5) > ath5k phy0: failed to wakeup the MAC Chip > ath5k phy0: can't reset hardware (-5) > wlan0: No ProbeResp from current AP 00:1d:0f:e9:c7:c0 - assume out of range > ath5k phy0: failed to wakeup the MAC Chip > ath5k phy0: ath5k_chan_set: unable to reset channel (2412 Mhz) > wlan0: failed to set freq to 2412 MHz for scan > ath5k phy0: failed to wakeup the MAC Chip > ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz) > wlan0: failed to set freq to 2417 MHz for scan > ath5k phy0: failed to wakeup the MAC Chip > ath5k phy0: ath5k_chan_set: unable to reset channel (2422 Mhz) > wlan0: failed to set freq to 2422 MHz for scan > ath5k phy0: failed to wakeup the MAC Chip > ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz) > wlan0: failed to set freq to 2427 MHz for scan > ath5k phy0: failed to wakeup the MAC Chip > ath5k phy0: ath5k_chan_set: unable to reset channel (2432 Mhz) > wlan0: failed to set freq to 2432 MHz for scan > wlan0: failed to set freq to 2437 MHz for scan > wlan0: failed to set freq to 2442 MHz for scan > wlan0: failed to set freq to 2447 MHz for scan > wlan0: failed to set freq to 2452 MHz for scan > wlan0: failed to set freq to 2457 MHz for scan > wlan0: failed to set freq to 2462 MHz for scan > wlan0: failed to set freq to 2467 MHz for scan > wlan0: failed to set freq to 2472 MHz for scan > wlan0: failed to set freq to 2484 MHz for scan > wlan0: failed to restore operational channel after scan > wlan0: authenticate with AP 00:1d:0f:e9:c7:c0 > wlan0: authenticate with AP 00:1d:0f:e9:c7:c0 > wlan0: authenticate with AP 00:1d:0f:e9:c7:c0 > wlan0: authentication with AP 00:1d:0f:e9:c7:c0 timed out > """ > > Then I lost my wireless connection. > > I'm running latest Linus git tree (2.6.28-rc2) on a Eeepc 701. > > The problem doesn't happen on 2.6.27.4, but as 2.6.28-rc1 doesn't > boot on this machine, it would be a bit difficult to bisect it. > > Thanks. > After this does ath_info work ? -- GPG ID: 0xD21DB2DB As you read this post global entropy rises. Have Fun ;-) Nick -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
