Search Linux Wireless

ath5k gets lost with eeepc-laptop removal

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 Hi guys,

 If I do a 'rmmod eeepc-laptop', while connected to my AP, I get the
following error messages from ath5k:

"""
ath5k phy0: noise floor calibration timeout (2417MHz)
ath5k phy0: failed to wakeup the MAC Chip
ath5k phy0: can't reset hardware (-5)
ath5k phy0: failed to wakeup the MAC Chip
ath5k phy0: can't reset hardware (-5)
wlan0: No ProbeResp from current AP 00:1d:0f:e9:c7:c0 - assume out of range
ath5k phy0: failed to wakeup the MAC Chip
ath5k phy0: ath5k_chan_set: unable to reset channel (2412 Mhz)
wlan0: failed to set freq to 2412 MHz for scan
ath5k phy0: failed to wakeup the MAC Chip
ath5k phy0: ath5k_chan_set: unable to reset channel (2417 Mhz)
wlan0: failed to set freq to 2417 MHz for scan
ath5k phy0: failed to wakeup the MAC Chip
ath5k phy0: ath5k_chan_set: unable to reset channel (2422 Mhz)
wlan0: failed to set freq to 2422 MHz for scan
ath5k phy0: failed to wakeup the MAC Chip
ath5k phy0: ath5k_chan_set: unable to reset channel (2427 Mhz)
wlan0: failed to set freq to 2427 MHz for scan
ath5k phy0: failed to wakeup the MAC Chip
ath5k phy0: ath5k_chan_set: unable to reset channel (2432 Mhz)
wlan0: failed to set freq to 2432 MHz for scan
wlan0: failed to set freq to 2437 MHz for scan
wlan0: failed to set freq to 2442 MHz for scan
wlan0: failed to set freq to 2447 MHz for scan
wlan0: failed to set freq to 2452 MHz for scan
wlan0: failed to set freq to 2457 MHz for scan
wlan0: failed to set freq to 2462 MHz for scan
wlan0: failed to set freq to 2467 MHz for scan
wlan0: failed to set freq to 2472 MHz for scan
wlan0: failed to set freq to 2484 MHz for scan
wlan0: failed to restore operational channel after scan
wlan0: authenticate with AP 00:1d:0f:e9:c7:c0
wlan0: authenticate with AP 00:1d:0f:e9:c7:c0
wlan0: authenticate with AP 00:1d:0f:e9:c7:c0
wlan0: authentication with AP 00:1d:0f:e9:c7:c0 timed out
"""

 Then I lost my wireless connection.

 I'm running latest Linus git tree (2.6.28-rc2) on a Eeepc 701.

 The problem doesn't happen on 2.6.27.4, but as 2.6.28-rc1 doesn't
boot on this machine, it would be a bit difficult to bisect it.

 Thanks.

-- 
Luiz Fernando N. Capitulino
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux